journal article·2022-12Open access

Rheology, durability, and mechanical performance of sustainable self-compacting concrete with metakaolin and limestone filler

Gemma Rojo-López, Belén González-Fonteboa, Fernando Martínez-Abella, Iris González-Taboada

Abstract

This study analyzed the performance of self-compacting concrete with a paste composition that includes limestone filler and metakaolin replacing cement to design binary (75% cement and 25% limestone filler) and ternary binders (60% cement, 25% limestone filler and 15% metakaolin). Furthermore, to analyze the effect of the solid volume fraction (volume of sand and coarse aggregate) on concrete rheology, the concretes were designed using four volumes of paste (350 l, 400 l, 450 l and 500 l). Rheological tests were performed at three resting times to measure the viscosity and yield stress over time. The results indicated that the viscosity decreased by 43.3% when the cement was replaced by limestone filler and increased by 73.1% when the cement was replaced by 15% metakaolin while maintaining the limestone filler. These values were obtained as 27.6% and 62.2%, respectively, when the yield stress was analyzed. In addition, the hardened properties (mechanical behavior and durability) were studied by measuring the strengths at 28 days, as well as the electrical resistivity and ultrasonic pulse velocity over time. In this case, at 28 days the use of binary binder reduces the strength and resistivity (about 20%) and the employment of ternary binder reduces strength (15%) while increases the resistivity up to the double (when compared to the 100 C concrete). Moreover, to measure the efficiency of the concrete, a material index was designed that considers the fresh behavior, mechanical performance, durability, cost, and environmental impact. Self-compacting concretes with ternary binders provided the highest indices. The use of alternative materials, particularly metakaolin has been proven to be a good option to enhance concrete sustainable performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Materials for production of high and ultra-high performance concrete: review and perspective of possible novel materials10.3390/ma14154304 ↗
2. Hardened material properties of self‐compacting concrete10.1080/13923730.2004.9636318 ↗
3. A review of the hardened mechanical properties of self-compacting concrete10.1016/j.cemconcomp.2006.07.010 ↗
4. Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: Literature review and theoretical calculations10.1016/j.cemconcomp.2012.01.004 ↗
5. Fresh and hardened characteristics of self compacting concretes made with combined use of marble powder, limestone filler, and fly ash10.1016/j.conbuildmat.2012.07.092 ↗
6. The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures10.1016/j.jclepro.2015.02.050 ↗
7. Rheology and mechanical characteristics of self-compacting concrete mixtures containing metakaolin10.1016/j.conbuildmat.2014.04.048 ↗
8. Effect of various supplementary cementitious materials on rheological properties of self-consolidating concrete10.1016/j.conbuildmat.2014.11.014 ↗
9. Adding limestone fines as cementitious paste replacement to lower carbon footprint of SCC10.1016/j.conbuildmat.2016.02.072 ↗
10. Quaternary blends of portland cement, metakaolin, biomass ash and granite powder for production of self-compacting concrete10.1016/j.jclepro.2020.121666 ↗
11. Recovery of sawdust resulting from marble processing plants for future uses in high value-added products10.1016/j.jclepro.2013.11.062 ↗
12. The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash10.1016/j.cemconres.2013.07.007 ↗
13. Rheological evaluations of interground and blended cement–limestone suspensions10.1016/j.conbuildmat.2014.12.054 ↗
14. Performance of self-compacting concrete containing different mineral admixtures10.1016/j.conbuildmat.2011.04.032 ↗
15. Effects of local metakaolin addition on rheological and mechanical performance of self-compacting limestone cement concrete10.1080/01694243.2019.1571737 ↗
16. Relationship between concrete resistivity and corrosion rate – a literature review10.1016/j.cemconcomp.2013.03.019 ↗
17. Fresh and hardened properties of self-compacting concrete with sugarcane bagasse ash–slag blended cement10.1016/j.conbuildmat.2018.07.029 ↗
18. Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: Literature review and theoretical calculations10.1016/j.cemconcomp.2012.01.004 ↗
19. Effects of experimental ternary cements on fresh and hardened properties of self-compacting concretes10.1080/01694243.2015.1099864 ↗
20. Synergistic effect of metakaolin and limestone on the hydration properties of Portland cement10.1016/j.conbuildmat.2019.06.059 ↗
21. Hydration, shrinkage, and durability of ternary binders containing Portland cement, limestone filler and metakaolin10.1016/j.conbuildmat.2018.06.138 ↗
22. Hydration and strength development in ternary portland cement blends containing limestone and fly ash or metakaolin10.1016/j.cemconcomp.2013.03.028 ↗
23. New methods development for evaluation rheological properties of self-consolidating mortars10.1016/j.conbuildmat.2014.09.094 ↗
24. Impact of physical and physicochemical properties of supplementary cementitious materials on structural build-up of cement-based pastes10.1016/j.cemconres.2020.105994 ↗
25. Fresh and hardened properties of self-compacting concrete containing metakaolin10.1016/j.conbuildmat.2012.04.109 ↗
26. Impact of metakaolin characteristics on the rheological properties of mortar in the fresh state10.1016/j.cemconcomp.2012.12.001 ↗
27. NF P18–513 - Addition for concrete - Metakaolin - Specifications and conformity criteria , n.d.
28. Influence of wood-based biomass ash admixing on the structural, mechanical, hygric, and thermal properties of air lime mortars10.3390/ma12142227 ↗
29. Effect of particle morphological parameters on sand grains packing properties and rheology of model mortars10.1016/j.cemconres.2015.11.002 ↗
30. EN 12350-8, 2019. Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test, n.d.
31. EN 12390-3 ,2019. Testing hardened concrete - Part 3: Compressive strength of test specimens, n.d.
32. EN 12390-6, 2009. Testing hardened concrete - Part 6: Tensile splitting strength of test specimens, n.d.
33. UNE 83988-2 ,2014 Concrete durability. Test methods. Determination of the electrical resistivity. Part 2: Four points or Wenner method., n.d.
34. EFNARC, The European Guidelines for Self-Compacting Concrete, Eur. Guidel. Self Compact. Concr., 2005, 63.
35. Analytical models for estimating yield stress of high-performance pseudoplastic grout10.1016/S0008-8846(01)00476-8 ↗
36. Comparison between rheological models for portland cement pastes10.1016/0008-8846(85)90125-5 ↗
37. Shear-thickening behavior of high-performance cement grouts — Influencing mix-design parameters10.1016/j.cemconres.2010.11.004 ↗
38. Rheological behavior & modeling of calcined kaolin-Portland cements10.1016/j.conbuildmat.2021.124761 ↗
39. Relationship between the composition and hydration-microstructure-mechanical properties of cement-metakaolin-limestone ternary system10.1016/j.conbuildmat.2021.124175 ↗
40. Roles of water film thickness and fibre factor in workability of polypropylene fibre reinforced mortar10.1016/j.cemconcomp.2018.07.014 ↗
41. The effect of paste volume and of water content on the strength and water absorption of concrete10.1016/j.cemconcomp.2004.02.009 ↗
42. Analysis of concrete strength versus water-cement ratio relationship
43. The influence of aggregate on the compressive strength of normal and high-strength concrete
44. Quantification methods for chloride binding in Portland cement and limestone systems10.1016/j.cemconres.2019.105864 ↗
45. Fresh and hardened properties of self consolidating Portland limestone cement mortars: effect of high volume limestone powder replaced by cement10.1016/j.conbuildmat.2018.11.111 ↗
46. Influence of various amounts of limestone powder on performance of Portland limestone cement concretes10.1016/j.cemconcomp.2009.08.003 ↗
47. Langfod · 1987
48. Correlation of compression resistance and rupture module of a concrete of ratio w/c = 0.50 with the corrosion potential, electrical resistivity and ultrasonic pulse speed10.1149/08401.0217ecst ↗
49. Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash10.1016/j.conbuildmat.2013.06.037 ↗
50. Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC)10.1016/j.conbuildmat.2017.11.159 ↗
51. ISO 14067, 2018(en), Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification, n.d.
52. Material efficiency in the design of UHPC paste from a life cycle point of view10.1016/j.conbuildmat.2017.11.049 ↗
53. Eco-mechanical index for structural concrete10.1016/j.conbuildmat.2013.12.090 ↗
54. Assessment of the sustainability potential of concrete and concrete structures considering their environmental impact, performance and lifetime10.1016/j.conbuildmat.2014.01.039 ↗
55. Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications10.1080/19648189.2015.1125392 ↗