Influence of rapid curing methods on concrete microstructure and properties: A review
Source abstract
Abstract
Along with the construction industrialization degree, precast concrete is being utilized more and more frequently in construction to speed up the process and guarantee the quality of structural concrete. In order to make the precast concrete reach the required strength quickly and speed up the turnover of formwork, various rapid concrete curing methods emerged. Currently steam curing, direct electric curing, and microwave curing are the widely studied rapid curing methods. Rapid curing methods could promote early strength growth by changing the internal and external temperature and humidity of concrete, but may lead to late strength shrinkage, increased internal micro-cracks, coarsening of pore structure and other problems. Based on the comprehensive analysis of the curing principles of the three rapid curing methods, this paper reviews the effects of the three rapid curing methods on the hydration process, properties, and microscopic pore structure of concrete. The shortcomings of different rapid curing methods, and the topics of future researchs are also included.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Hydration kinetics modeling of Portland cement considering the effects of curingtemperature and applied pressure.10.1016/j.cemconres.2009.01.014 ↗
2. T. Matsushita, S. Hoshino, I. Maruyama, et al. Effect of curing temperature and water to cement ratio on hydration of cement compounds[C]//Proceedings of 12th International Congress Chemistry of Cement, Montreal, 2007.
3. Reaction kinetics of portland cement mortars hydrated at different temperatures.10.1016/0008-8846(92)90141-H ↗
4. The mechanical characteristics of steam-cured high strength concrete incorporating with lightweight aggregate.10.1016/j.conbuildmat.2016.12.171 ↗
5. Experimental study on compressive strength and frost resistance of steam cured concrete with mineral admixtures.10.1016/j.conbuildmat.2022.126725 ↗
6. Influence of steam-curing regimes on freezing-thawing resistance of high strength concrete.
7. Residual expansion deformation of high-speed railway steam-cured concrete: mechanism, modeling, and measurement.10.1007/s43452-021-00281-9 ↗
8. Fengtai Bridge Factory of the Ministry of Railways. Steam curing of concrete [M]: Steam curing of concrete, 1979.
9. Durability and microstructure of steam cured and autoclaved PHC pipe piles.10.1016/j.conbuildmat.2019.03.166 ↗
10. Ddl Chung. Resistance heating using electrically conductive cements.10.1680/adcr.2004.16.4.161 ↗
11. Effect of alternating current field on rheology of fresh cement-based pastes.
12. Kawada · 2016
13. High-temperature Solid Oxide Fuel Cells for the 21st Century
14. Direct electric curing of concrete.. Magazine of Concrete Research
15. Accelerated electric curing of steel-fibre reinforced concrete.10.1016/j.conbuildmat.2018.08.183 ↗
16. Electrical curing of concrete.10.1680/macr.1959.1.1.21 ↗
17. Experimental investigation on mechanical strength and microstructure of cement paste by electric curing with different voltage and frequency.10.1016/j.conbuildmat.2021.123615 ↗
18. Electric curing parameters of mortar and its mechanical properties in cold weather.
19. C. Ylab, C. Mwab, A. Wt, et al. Ohmic heating curing of carbon fiber/carbon nanofiber synergistically strengthening cement-based composites as repair/reinforcement materials used in ultra-low temperature environment.. Composites Part A: Applied Science and Manufacturing, 125: 105570–105570.10.1016/j.compositesa.2019.105570 ↗
20. Ohmic heating curing of electrically conductive carbon nanofiber/cement-based composites to avoid frost damage under severely low temperature.10.1016/j.compositesa.2018.10.008 ↗
21. Enhanced effect of carbon nanofibers on heating efficiency of conductive cementitious composites under ohmic heating curing.
22. Early-age performance of graphene-nanoplatelet-modified high-strength concrete cured by electric thermal curing in severe cold regions.10.3390/buildings12020086 ↗
23. Electric induced curing of graphene/cement-based composites for structural strength formation in deep-freeze low temperature.10.1016/j.matdes.2018.10.008 ↗
24. Am paillere, paillere am, serrano jj. utilisation de la conductivite des fibres metalliques dans le traitement thermique des betons frais et dans le chauffage des betons durcis., 1981.
25. The hydraulic reaction of tricalcium silicate observed by microwave dielectric measurements.10.1051/rphysap:01978001308038300 ↗
26. Determination of water content of fresh concrete using a microwave oven.10.1520/CCA10290J ↗
27. Review on microwave nondestructive testing techniques and its applications in concrete technology.10.1016/j.conbuildmat.2019.03.110 ↗
28. Microwave decontaminator for concrete surface decontamination in JPDR
29. Removal of contaminated concrete surfaces by microwave heating–phase I results presented at the 18th American nuclear society symposium on waste management waste management 92.
30. Microwave (2.45GHz)-assisted rapid sintering of SiO2-rich rice husk ash.10.1016/j.matlet.2009.11.018 ↗
31. Applications of microwave energy in cement and concrete–a review.10.1016/j.rser.2014.05.054 ↗
32. Production of high-early-compressive-strength Portland cement paste using low-pressure microwave-accelerated heating and curing: processing characteristics and factors affected.10.1016/j.heliyon.2019.e02098 ↗
33. Microwave absorption by water in building materials.10.1088/0508-3443/15/7/307 ↗
34. Microwave-assisted heating of cementitious materials: relative dielectric properties, mechanical property, and experimental and numerical heat transfer characteristics.10.1016/j.icheatmasstransfer.2010.06.029 ↗
35. Effects of microwave curing on the compressive strength development and hydration of cement-granulated blast furnace slag composite system.10.1016/j.conbuildmat.2020.121432 ↗
36. Microwave curing of Portland cement concrete: experimental results and feasibility for practical applications.10.1016/0950-0618(94)00001-I ↗
37. Very high early strength of microwave cured concrete.10.1016/0008-8846(94)00121-E ↗
38. Determination of optimal process for microwave curing of concrete.10.1016/S0008-8846(97)00015-X ↗
39. Guo · 2020
40. Correlation analysis of heating performance and electrical energy of multi-walled carbon nanotubes cementitious composites at sub-zero temperatures.10.1016/j.compstruct.2020.111977 ↗
41. Direct electric curing of alkali-activated fly ash concretes: a tool for wider utilization of fly ashes.10.1016/j.jclepro.2016.05.098 ↗
42. Direct electric curing of in situ concrete.
43. Y. Xiang, G. Long, Y. Xie, et al. Thermal damage and its controlling methods of high‐speed railway steam‐cured concrete: A review.. Structural Concrete, 2020.10.1002/suco.202000433 ↗
44. Equipment for the investigation of the accelerated curing of concrete using direct electrical conduction.10.1016/j.measurement.2003.11.002 ↗
45. Review on the microstructure formation mechanism in concrete materialunder different curing regimes.
46. An effective method for preparing high early-strength cement-based materials: the effects of direct electric curing on Portland cement.
47. Hydration kinetics and microstructure development of ultra-high performance concrete (UHPC) subjected to microwave pre-curing.
48. Ohmic heating curing of high content fly ash blended cement-based composites towards sustainable green construction materials used in severe cold region.10.1016/j.jclepro.2020.123300 ↗
49. Effects of microwave curing on the mechanical properties of ultra-highperformance concrete and affecting mechanism.
50. Hydration products of cement-silica fume-quartz powder mixture under different curing regimes.10.1007/s11595-017-1640-8 ↗
51. Heat curing and post-heat curing regimes of high-performance concrete: influence on microstructure and CSH composition.10.1016/0008-8846(95)00202-2 ↗
52. Pore structure of plain cement pastes hydrated at different temperatures.10.1016/0008-8846(90)90055-3 ↗
53. Research on the preformancr of electric induced hardening carbon fiber reinforced high performance concrete
54. Qiyuan Xiao, Guangcheng Long, Xiaohui Zeng, et al. Strength and Microstructure of Cement Paste Under the Coupling Action of Electric Field and Nano-Carbon Black.. Xiaohui and Tang, Zhuo and Li, Wenxu and Ma, Kunlin, Strength and Microstructure of Cement Paste Under the Coupling Action of Electric Field and Nano-carbon Black.
55. Charlotte Famy. Expansion of heat-cured mortars.. Ph. D. Thesis, Department of Materials, Imperial College of Science, University of London, 1999.
56. Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H).10.1016/j.cemconres.2013.06.008 ↗
57. Effect of electrical curing application on setting time of concrete with different stress intensity.10.1016/j.conbuildmat.2017.12.036 ↗
58. Hydration and microstructure of cement-based materials under microwave curing.10.1016/j.conbuildmat.2016.03.202 ↗
59. SEM analysis of the interfacial transition zone between cement-glass powder paste and aggregate of mortar under microwave curing.10.3390/ma9090733 ↗
60. Review on effect of steam curing on behavior of concrete.
61. Efficiency of metakaolin in steam cured high strength concrete.10.1016/j.conbuildmat.2017.07.006 ↗
62. Effect of curing regimes and sulphate attack on the properties and microstructure of ultra high performance concrete[D]
63. A comparative study on the mechanical properties and microstructure of cement-based materials by direct electric curing and steam curing.10.3390/ma14237407 ↗
64. Effects of isothermal microwave heating on the strength and microstructure of ultra-high performance concrete embedded with steel fibers.10.1016/j.jmrt.2021.07.092 ↗
65. Alteration of Ca(OH)2 contentduring hydration process of composite binders.
66. Influence of microwave-accelerated curing procedures on the microstructure and strength characteristics of Type I-Portland cement pastes.
67. Influence of subsequent curing system on the mechanicalproperties of high-strength concrete.
68. Chemical equilibria between C–S–H and ettringite, at 20 and 85C.10.1016/j.cemconres.2007.04.013 ↗
69. M. Venuat. Effect of elevated temperatures and pressures on the hydration and hardening of cement[C]//Symp. Chem. Cement Moscow, 1974.
70. The change and influence mechanism of the mechanical properties of tricalcium silicate hardening at high temperature.10.1016/j.conbuildmat.2021.125065 ↗
71. Heat damage of steam curing on the surface layer of concrete.10.1680/macr.11.00164 ↗
72. Evolution of multi-scale pore structure of concrete during steam-curing process.10.1016/j.micromeso.2019.109566 ↗
73. Microcracking as a precursor to delayed ettringite formation in cement systems.10.1016/0008-8846(96)00134-2 ↗
74. Recent development of microwave applications for concrete treatment.10.1016/j.conbuildmat.2020.121224 ↗
75. Hydration, mechanical properties and durability of high-strength concrete under different curing conditions.10.1007/s10973-018-7007-3 ↗
76. Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure.10.1016/j.cemconres.2009.01.014 ↗
77. Heat damage effects of steam curing on concrete and corresponding improvement measures
78. Effects of steam curing regimes on the capillary water absorption of concrete: prediction using multivariable regression models.10.1016/j.conbuildmat.2020.119426 ↗
79. Effect of accelerated curing regimes on high volume Fly ash mixtures in precast manufacturing plants.10.1016/j.cemconres.2019.105913 ↗
80. Fracture properties of steam-cured concrete under differentcuring temperatures.
81. Research on the effect of steam curing temperature and duration on the strength of manufactured sand concrete and strength estimation model considering thermal damage.10.1016/j.conbuildmat.2021.125531 ↗
82. B. laD. Heritage. Direct electric curing of mortar and concrete[D]. Napier University Edinburgh, Uk, 2001.
83. Lynn Johnson. Microwave curing effects on the 28-day strength of cementitious materials.10.1016/S0008-8846(98)00189-6 ↗
84. Impact mechanical characteristies of steam cured concrete under different curing temperatures.
85. The impact mechanical characteristics of steam-cured concrete under different curing temperature conditions.10.1016/j.conbuildmat.2020.118042 ↗
86. Mechanical properties evolution of concrete in steam-curing process.
87. Setting time: An important criterion to determine the length of the delay period before steam curing of concrete.10.1016/S0008-8846(02)01058-X ↗
88. Sidney Mindess. Developments in the Formulation and Reinforcement of Concrete[M]: Woodhead Publishing, 2019.
89. Bo Peng. Influence of steam-curing system on the performance of high strength concrete[D]. Wuhan University of Technology, 2007.
90. The effect of excessive steam curing on Portland composite cement concrete.10.1016/j.cemconres.2004.07.038 ↗
91. experimental study of microwave drying under low pressure to accelerate the curing of Portland cement pastes using a combined unsymmetrical double-fed microwave and vacuum system.10.1016/j.ijheatmasstransfer.2018.06.119 ↗
92. Effect of microwave curing conditions on high strength concrete properties.10.1016/j.egypro.2014.07.128 ↗
93. Development of compressive strength of cement paste under accelerated curing by using a continuous microwave thermal processor.10.1016/j.msea.2007.03.035 ↗
94. Hydration and microstructure of cement-based materials under microwave curing.10.1016/j.conbuildmat.2016.03.202 ↗
95. Accelerated microwave curing of concrete: a design and performance-related experiments.10.1016/j.cemconcomp.2017.08.007 ↗
96. Study of steam and microwave curing of concretes containing slag, fly ash, or silica fume.10.1520/JTE20140107 ↗
97. Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes.10.1016/j.conbuildmat.2019.06.084 ↗
98. The effect of steam curing regimes on the chloride resistance and pore size of high–strength green concrete.10.1016/j.conbuildmat.2021.122409 ↗
99. Influence of Mineral Admixtures on the Short and Long-term Performance of Steam-cured Concrete
100. Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC).10.1016/j.conbuildmat.2017.11.159 ↗