State of the art on the application of waste materials in geopolymer concrete
Source abstract
Abstract
This review paper presents and analyses the mechanical and durability properties of geopolymer concrete (GPC) which contain various waste materials. Significant findings have concluded that the absence of guidelines for the mix design of GPC has resulted in a wide variance of design parameters and therefore strength and durability properties. The purpose of this review is to compile recent research to highlight the inadequacy of the current literature and identify areas in which the current mix design can be improved. The development of mix design guidelines that focus on optimal Si/Al ratio, NaOH concentration and sodium silicate to sodium hydroxide (SS/SH) ratio are required, as these factors are significantly affected by the addition of waste materials with varying chemical compositions and morphology.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Greening of the concrete industry for sustainable development
2. Life cycle assessment of the production of Portland cement: a Southern Europe case study10.1016/j.jclepro.2016.02.110 ↗
3. Environmental Protection Agency · 2010 · 31
4. Van Oss · 2005 · 88
5. A comprehensive assessment of the global warming potential of geopolymer concrete10.1016/j.jclepro.2021.126669 ↗
6. Modulus of rupture evaluation of cement stabilized recycled glass/recycled concrete aggregate blends10.1016/j.conbuildmat.2015.03.048 ↗
7. Performance of recycled aggregate concrete based on a new concrete recycling technology10.1016/j.conbuildmat.2015.07.021 ↗
8. Influence of the water variation on the mechanical properties of concrete manufactured with recycled mixed aggregates for pre-stressed components10.1016/j.conbuildmat.2015.07.097 ↗
9. Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement10.1016/j.conbuildmat.2015.07.042 ↗
10. Bond behavior between steel bar and recycled aggregate concrete after freeze-thaw cycles10.1016/j.coldregions.2015.06.008 ↗
11. Carbonation behaviour of recycled aggregate concrete10.1016/j.cemconcomp.2015.04.017 ↗
12. Davidovits · 2015
13. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
14. Effect of sodium hydroxide concentration on chloride penetration and steel corrosion of fly ash-based geopolymer concrete under marine site10.1016/j.conbuildmat.2014.04.010 ↗
15. Chloride induced corrosion in different fly ash based geopolymer concretes10.1016/j.conbuildmat.2018.12.168 ↗
16. Thermal resistance of fly ash based rubberized geopolymer concrete10.1016/j.jobe.2018.05.025 ↗
17. Freeze-thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
18. Frost resistance of fiber-reinforced blended slag and Class F fly ash-based geopolymer concrete under the coupling effect of freeze-thaw cycling and axial compressive loading10.1016/j.conbuildmat.2020.118831 ↗
19. Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation10.1016/j.cemconres.2017.07.008 ↗
20. Effect of binder content on the performance of alkali-activated slag concretes10.1016/j.cemconres.2010.08.017 ↗
21. Enhancing the engineering properties and microstructure of room temperature cured alkali activated natural pozzolan based concrete utilizing nanosilica10.1016/j.conbuildmat.2018.08.166 ↗
22. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
23. Strength, permeability and micro-structural characteristics of low-calcium fly ash based geopolymers10.1016/j.conbuildmat.2017.03.031 ↗
24. Engineering properties of inorganic polymer concretes (IPCs)10.1016/j.cemconres.2006.10.008 ↗
25. Climate Analytics · 2019 · 3
26. Geopolymer cement and concrete: properties10.1016/j.matpr.2020.04.513 ↗
27. Department Of The Environment And Energy · 2018 · 1
28. Efficiency of rice husk ash as cementitious material in high-strength cement-admixed clay
29. Singh · 2018
30. Characterization and utilization of rice husk ash (RHA) in fly ash – blast furnace slag based geopolymer concrete for sustainable future10.1016/j.matpr.2020.02.870 ↗
31. Glavind · 2009
32. Mechanical properties and permeability of red mud-blast furnace slag-based geopolymer concrete10.1007/s42452-020-03985-4 ↗
33. Influence of waste glass on the microstructure and strength of inorganic polymers10.1016/j.ceramint.2015.07.160 ↗
34. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites10.1016/j.cemconcomp.2012.11.010 ↗
35. Effect of alkali-activator and rice husk ash content on strength development of fly ash and residual rice husk ash-based geopolymers10.1016/j.conbuildmat.2015.10.025 ↗
36. A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete10.1016/j.cemconcomp.2018.07.009 ↗
37. Properties of fresh and hardened fly ash/slag based geopolymer concrete: a review10.1016/j.jclepro.2020.122389 ↗
38. Comparative study on the characteristics of fly ash and bottom ash geopolymers10.1016/j.wasman.2008.06.023 ↗
39. Influence of recycled aggregate on fly ash geopolymer concrete properties10.1016/j.jclepro.2015.10.109 ↗
40. Effect of chemical admixtures on properties of high-calcium fly ash geopolymer10.1007/s12613-011-0448-3 ↗
41. Low-reactive circulating fluidized bed combustion (CFBC) fly ashes as source material for geopolymer synthesis10.1016/j.wasman.2009.09.014 ↗
42. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste10.1016/j.cemconcomp.2013.09.012 ↗
43. Influence of NaOH solution on the synthesis of fly ash geopolymer10.1016/j.mineng.2009.03.022 ↗
44. Using sucrose for improvement of initial and final setting times of silica fume-based activating solution of fly ash geopolymer concrete10.1016/j.conbuildmat.2018.09.199 ↗
45. The use of high calcium wood ash in the preparation of Ground Granulated Blast Furnace Slag and pulverized fly Ash geopolymers: a complete microstructural and mechanical characterization10.1016/j.jclepro.2017.04.026 ↗
46. Preparation and tests for workability, compressive and bond strength of ultra-fine slag based geopolymer as concrete repairing agent10.1016/j.conbuildmat.2017.07.187 ↗
47. Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag10.1016/j.jclepro.2018.08.255 ↗
48. Tie-confinement aspects of fly ash-GGBS based geopolymer concrete short columns10.1016/j.conbuildmat.2017.06.065 ↗
49. Atomic-structure, microstructure and mechanical properties of glass powder modified metakaolin-based geopolymer10.1016/j.conbuildmat.2020.119303 ↗
50. Use of waste glass in alkali activated cement mortar10.1016/j.conbuildmat.2017.11.080 ↗
51. Study on the engineering properties and prediction models of an alkali-activated mortar material containing recycled waste glass10.1016/j.conbuildmat.2016.11.103 ↗
52. High strength geopolymer binder based on waste-glass powder10.1016/j.apt.2016.09.034 ↗
53. Experimental study on geopolymer concrete prepared using high-silica RHA incorporating alccofine
54. Coupling effects of recycled aggregate and GGBS/metakaolin on physicochemical properties of geopolymer concrete10.1016/j.conbuildmat.2019.07.311 ↗
55. Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization10.1016/j.conbuildmat.2012.09.013 ↗
56. Effect of composition on characteristics of thin film transistor liquid crystal display (TFT-LCD) waste glass-metakaolin-based geopolymers10.1016/j.conbuildmat.2012.05.018 ↗
57. Factors affecting the suitability of fly ash as source material for geopolymers10.1016/j.fuel.2009.09.012 ↗
58. On the development of fly ash-based geopolymer concrete
59. A review on mixture design methods for geopolymer concrete10.1016/j.compositesb.2019.107490 ↗
60. Lightweight geopolymer made of highly porous siliceous materials with various Na2O/Al2O3 and SiO2/Al2O3 ratios10.1016/j.msea.2011.04.044 ↗
61. Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation10.1016/j.jclepro.2014.11.074 ↗
62. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
63. Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability10.1016/j.jobe.2019.02.006 ↗
64. A mix design procedure for geopolymer concrete with fly ash10.1016/j.jclepro.2016.05.041 ↗
65. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
66. Microstructure, strength, and moisture stability of alkali activated glass powder-based binders10.1016/j.cemconcomp.2013.09.011 ↗
67. Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: strength and permeability properties10.1016/j.jclepro.2018.08.313 ↗
68. Correlating the elastic properties of metakaolin-based geopolymer with its composition10.1016/j.matdes.2016.01.107 ↗
69. Waste glass from end-of-life fluorescent lamps as raw material in geopolymers10.1016/j.wasman.2016.04.003 ↗
70. Relations between the structural characteristics and compressive strength in metakaolin based geopolymers with different molar Si/Al ratios10.1016/j.ceramint.2015.04.125 ↗
71. Long term permeation properties of different fly ash geopolymer concretes10.1016/j.conbuildmat.2016.07.121 ↗
72. Provis · 2009
73. Waste glass powder-based alkali-activated mortar10.15623/ijret.2014.0325006 ↗
74. Low-temperature synthesized aluminosilicate glasses: part IV. Modulated DSC study on the effect of particle size of metakaolinite on the production of inorganic polymer glasses10.1023/A:1024733431657 ↗
75. The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete10.1016/j.conbuildmat.2012.06.064 ↗
76. Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method10.1016/j.conbuildmat.2017.02.131 ↗
77. Utilization of red mud in geopolymer-based pervious concrete with function of adsorption of heavy metal ions10.1016/j.jclepro.2018.09.263 ↗
78. Waste glass as binder in alkali activated slag–fly ash mortars10.1617/s11527-019-1404-3 ↗
79. Experimental study on rise husk ash & fly ash based geo-polymer concrete using M-Sand
80. Effect of rice husk ash addition on the compressive strength and thermal stability of metakaolin based geopolymer10.1016/j.conbuildmat.2019.06.200 ↗
81. Engineering properties of alkali-activated fly ash concrete
82. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres10.1016/S0008-8846(03)00222-9 ↗
83. Engineering properties of alkali activated natural pozzolan concrete
84. Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2016.11.034 ↗
85. Mechanical properties of metakaolin-based geopolymers with molar ratios of Si/Al ≈ 2 and Na/Al ≈ 110.1007/s10853-007-2412-1 ↗
86. Influence of red mud and waste glass on the microstructure, strength, and leaching behavior of bottom ash-based geopolymer composites10.1038/s41598-020-76818-4 ↗
87. Effects of ultra fine slag as mineral admixture on the compressive strength, water absorption and permeability of rice husk ash based geopolymer concrete
88. Impact of alkali silica reaction on fly ash-based geopolymer concrete10.1061/(ASCE)MT.1943-5533.0000579 ↗
89. Alkali–silica reaction in metakaolin-based geopolymer mortar10.1617/s11527-014-0445-x ↗
90. The role of activating solution concentration on alkali-silica reaction in alkali-activated fly ash concrete10.1016/j.cemconres.2016.02.008 ↗
91. Comparison of pore structure in alkali activated fly ash geopolymer and ordinary concrete due to alkali-silica reaction using micro-computed tomography10.1016/j.conbuildmat.2019.117524 ↗
92. Effect of the inherent alkalis of alkali activated slag on the risk of alkali silica reaction10.1016/j.cemconres.2017.04.009 ↗
93. Performance of glass-powder concrete in field applications10.1016/j.conbuildmat.2016.02.006 ↗
94. Studies on concrete containing ground waste glass10.1016/S0008-8846(99)00213-6 ↗
95. Value-added utilisation of waste glass in concrete10.1016/S0008-8846(03)00251-5 ↗
96. Characteristics and pozzolanic reactivity of glass powders10.1016/j.cemconres.2004.05.015 ↗
97. Durability properties of geopolymer concrete made from fly ash in presence of Kaolin10.1016/j.matpr.2020.04.696 ↗
98. Sulfate resistance of ferrochrome slag based geopolymer concrete10.1016/j.ceramint.2015.09.058 ↗
99. Durability characteristics of steel fibre reinforced geopolymer concrete10.1016/j.conbuildmat.2015.06.014 ↗
100. Olivia · 2011