journal article·2024-07Open access

Mechanical performance of asphalt mixture containing eco-friendly additive by recycling PET

Sajed Baradaran, Jamal Rahimi, Mahmoud Ameri, Ali Maleki

Abstract

The reason for conducting this research was to examine asphalt mixtures and the influence of additives obtained from recycled Polyethylene Terephthalate (PET) on their mechanical properties. Due to this, after the chemical recycling of PET, the substance resulting from the chemical reaction was added to the asphalt binder in different contents. In order to evaluate the mechanical performance of mixtures containing additives, a variety of different mechanical tests were carried out. In order to accomplish this goal, tests including dynamic creep, indirect tensile strength (ITS), and indirect tensile modulus (IDTM) were carried out to determine rutting, moisture susceptibility, and resilient modulus, respectively. The SCB test is used to determine how well a material resists cracking when subjected to low temperatures. The results showed that the addition of an additive derived from recycled PET could increase the rutting resistance, significantly improve resistance against moisture damage and increase cracking resistance at low temperatures. In accordance with the findings of the indirect tensile strength tests, indirect tensile modulus and SCB was the best performance related to the asphalt mixture containing 2% recycled PET. However, this result was different in the dynamic creep test, and the asphalt mixture containing 1% additive showed the best performance. The results of data analysis with one-way analysis of variance showed that all the data obtained in this study are statistically significant considering the confidence factor of 95%, so it can be said that the addition of recycled PET additive has a significant effect on the mechanical properties of the asphalt mixture.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Microplastics and Plastic Pollution · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Sustainable bio plastic production through landfill methane recycling10.1016/j.rser.2016.12.083 ↗
2. Plastic waste and its management strategies for environmental sustainability10.1016/j.cscee.2021.100142 ↗
3. An approach to the usage of polyethylene terephthalate (PET) waste as roadway pavement material10.1016/j.jhazmat.2014.07.018 ↗
4. Novel trends in plastic waste management10.1007/s42452-019-1468-2 ↗
5. Effect of biodegrading polyethylene, polystyrene, and polyvinyl chloride on the growth and development of yellow mealworm (Tenebrio molitor) larvae10.1007/s11356-022-24957-8 ↗
6. Research progress for plastic waste management and manufacture of value-added products10.1007/s42114-020-00190-0 ↗
7. Study of soil reinforcement in the east of Mashhad using glass granule10.1088/2053-1591/acd5af ↗
8. Production, use, and fate of all plastics ever made10.1126/sciadv.1700782 ↗
9. A. Duncan Rouch Plastic future: How to reduce the increasing environmental footprint of plasticpackaging. 2021.
10. Full circle: Challenges and prospects for plastic waste management in Australia to achieve circular economy10.1016/j.jclepro.2022.133127 ↗
11. Managing plastic waste disposal by assessing consumers’ recycling behavior: the case of a densely populated developing country10.1007/s11356-019-06411-4 ↗
12. Public and environmental health effects of plastic wastes disposal: a review10.23937/2572-4061.1510021 ↗
13. Determination of phthalate acid esters plasticizers in polyethylene terephthalate bottles and its correlation with some physicochemical properties10.1016/j.polymertesting.2018.04.002 ↗
14. Plastic waste in the marine environment: a review of sources, occurrence and effects10.1016/j.scitotenv.2016.05.084 ↗
15. Flexural behavior and analysis of reinforced concrete beams made of recycled PET waste concrete10.1016/j.conbuildmat.2017.08.096 ↗
16. Plastic degradation and its environmental implications with special reference to poly(ethylene terephthalate)10.3390/polym5010001 ↗
17. Environmental performance analysis on resource multiple-life-cycle recycling system: evidence from waste pet bottles in China10.1016/j.resconrec.2020.104821 ↗
18. Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt10.1016/j.jclepro.2018.01.171 ↗
19. Value-added application of waste PET based additives in bituminous mixtures containing high percentage of reclaimed asphalt pavement (RAP)10.1016/j.jclepro.2018.06.119 ↗
20. Plastics recycling and waste management in the US10.1016/S0921-3449(99)00049-X ↗
21. Mechanical and chemical recycling of solid plastic waste10.1016/j.wasman.2017.07.044 ↗
22. Advances and approaches for chemical recycling of plastic waste10.1002/pol.20190261 ↗
23. Utilization of recycled polyethylene terephthalate (PET) in engineering materials: a review10.7763/IJESD.2016.V7.749 ↗
24. Environmental and economic assessment of collective recycling waste plastic and reclaimed asphalt pavement into pavement construction: a case study in Hong Kong10.1016/j.jclepro.2022.130405 ↗
25. Laboratory properties of waste PET plastic-modified asphalt mixes10.3390/recycling6030049 ↗
26. A review on the effect of various additives on mechanical properties of stone mastic asphalt (SMA)
27. Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes10.1016/j.matdes.2014.04.046 ↗
28. Utilization Of waste plastic bottlesin asphalt mixture
29. Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt10.1016/j.conbuildmat.2012.06.015 ↗
30. Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test10.1016/j.matdes.2013.07.015 ↗
31. Investigation of rutting failure in asphalt mixtures and its improvement strategies
32. Investigating the mechanical properties of asphalt concrete containing waste polyethylene terephthalate10.1080/14680629.2017.1395354 ↗
33. Performance properties of devulcanized waste PET modified asphalt mixtures10.1080/10916466.2016.1251457 ↗
34. Poly(ethylene terephthalate) waste derived chemicals as an antistripping additive for bitumen – An environment friendly approach for disposal of environmentally hazardous material10.1016/j.polymdegradstab.2013.09.019 ↗
35. Fracture and mechanical properties of asphalt mixtures containing granular polyethylene terephthalate (PET)10.1016/j.conbuildmat.2020.120410 ↗
36. Sustainable practice in pavement engineering through value-added collective recycling of waste plastic and waste tyre rubber10.1016/j.eng.2020.08.020 ↗
37. Innovative application of waste polyethylene terephthalate (PET) derived additive as an antistripping agent for asphalt mixture: experimental investigation and molecular dynamics simulation10.1016/j.fuel.2021.121015 ↗
38. Chemical upcycling of waste PET into sustainable asphalt pavement containing recycled concrete aggregates: insight into moisture-induced damage10.1016/j.conbuildmat.2022.129632 ↗
39. ASTM D3515 · 2009
40. J.S. Miller W.Y. Bellinger Distress Identification Manual for the Long-Term Pavement Performance Program 2003.
41. The use of asphalt low shear viscosity to predict permanent deformation performance of asphalt concrete10.1617/s11527-010-9696-3 ↗
42. AS2891.12.1 Methods Of Sampling And Testing Asphalt, Method 12.1: Determination Of The Permanent Compressive Strain Characteristics Of Asphalt - Dynamic Creep Test. 1995.
43. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes10.1061/(ASCE)0733-947X(2004)130:4(486) ↗
44. Laboratory investigation and statistical analysis of the rutting and fatigue resistance of asphalt mixtures containing crumb-rubber and wax-based warm mix asphalt additive10.1016/j.conbuildmat.2021.125165 ↗
45. Moisture susceptibility of asphalt mixtures, Part 1: mechanisms10.1080/10298430701792128 ↗
46. AASHTO T 283. (2014). Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage.
47. Use of the resilient modulus test to characterize asphalt mixtures with recycled materials and recycling agents10.3141/2506-05 ↗
48. Standard test method for indirect tension test for resilient modulus of bituminous mixtures
49. Low temperature performance characteristics of polyethylene modified asphalts – A review10.1016/j.conbuildmat.2020.120704 ↗
50. Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture10.1016/j.conbuildmat.2019.117678 ↗
51. AASHTO TP 124–16. (2016). Provisional Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature.
52. Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test10.1016/j.conbuildmat.2018.02.014 ↗
53. Determining the low-temperature fracture toughness of asphalt mixtures10.3141/1789-21 ↗
54. Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading10.1016/j.commatsci.2006.04.008 ↗
55. Moisture damage mechanism and material selection of HMA with amine antistripping agent10.1016/j.matdes.2022.110797 ↗
56. Laboratory investigation of moisture damage in rubberised asphalt mixtures containing reclaimed asphalt pavement10.1080/10298430802169432 ↗
57. Specification criteria for simple performance tests for rutting, volume i: dynamic modulus (E*) and volume II: flow number and flow time
58. Study of the amine-based liquid anti-stripping agents by simulating hot mix asphalt plant production process10.1016/j.conbuildmat.2017.09.168 ↗
59. Laboratory experiment on resilient modulus of BRA modified asphalt mixtures10.1016/j.ijprt.2017.08.005 ↗
60. Moisture susceptibility of warm mixed-reclaimed asphalt pavement containing Sasobit and Zycotherm additives10.1080/10916466.2017.1290655 ↗
61. Introducing adhesion–cohesion index to evaluate moisture susceptibility of asphalt mixtures using a registration image-processing method10.1061/(ASCE)MT.1943-5533.0003477 ↗
62. Impact of bitumen and aggregate composition on stripping in bituminous mixtures10.1007/s11527-005-9040-5 ↗
63. Application of asymmetric semi circular bend test for determining mixed mode I+ II fracture toughness of compacted soil material10.1016/j.engfracmech.2022.108268 ↗