journal article·2022-12Open access

Ultra-high-performance fiber-reinforced concrete. Part IV: Durability properties, cost assessment, applications, and challenges

Mahmoud H. Akeed, Shaker Qaidi, Hemn U. Ahmed, Rabar H. Faraj, Ahmed S. Mohammed, Wael Emad, Bassam A. Tayeh, Afonso R.G. Azevedo

Abstract

Ultra-high-performance concrete (UHPC) is a type of cement-based composite for new construction and/or restoration of existing structures to increase service life. It is an innovative composite material that can be a suitable alternative to concrete structures exposed to aggressive conditions. After decades of research and development, a wide range of commercial UHPC compositions have been produced worldwide to cover a growing number of applications and a growing demand for high-quality construction materials. UHPC has significant advantages over regular concrete, but its use is limited due to limited design codes and prohibitive cost. Therefore, a comprehensive investigation of the durability characteristics of UHPC is essential to provide fundamental information for material testing requirements and procedures and expand its practical applications. Part I reviewed the developments, principles, and raw materials of the UHPFRC. Part II reviewed the hydration and microstructure of the UHPFRC. Part III reviewed the fresh and hardened properties of the UHPFRC. This Part IV covers the durability properties, cost assessment, applications, and challenges of the UHPFRC. Part V covers the mixture design, preparation, mixing, casting, and curing of the UHPFRC. This review is expected to advance the fundamental knowledge of UHPC and promote further research and applications of UHPC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Schmidt · 2005 · 51
2. Experimental and theoretical studies of ordinary Portland cement composites contains nano LSCO perovskite with Fokker-Planck and chemical reaction equations10.1016/j.conbuildmat.2017.12.073 ↗
3. Use of AFM technique to study the nano-silica effects in concrete mixture10.17485/ijst/2012/v5i2.5 ↗
4. A. Sadeghi-Nik, A. Bahari, Z. Khorshidi, R. Gholipur, Effect of lanthanum oxide on the bases of cement and concrete, Third Int. Conf. Constr. Dev. Ctries.(Advancing Civil, Archit. Constr. Eng. Manag. Bangkok, Thailand, 2012, pp. 4–6.
5. Experimental studies on rheological, mechanical, and microstructure properties of self‐compacting concrete containing perovskite nanomaterial10.1002/suco.202000548 ↗
6. Characterizing fiber reinforced concrete incorporating zeolite and metakaolin as natural pozzolans
7. One-step random-walk process of nanoparticles in cement-based materials10.1007/s11771-021-4726-6 ↗
8. Y. Voo, S. Foster, L. Pek, Ultra-high performance concrete—technology for present and future, Proceedings of the High Tech Concrete: Where Technology and Engineering Meet, Maastricht, The Netherlands, 2017, pp. 12–14.
9. B.A. Tayeh, B.A. Bakar, M. Johari, Mechanical properties of old concrete-UHPFC interface, International Conference on Concrete Repair, Rehabilitation and Retrofitting, 2012, pp. 02–05.
10. Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay10.1016/j.conbuildmat.2012.06.013 ↗
11. Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite10.1617/s11527-012-9931-1 ↗
12. Influence of steel fibers and microsilica on the mechanical properties of ultra-high-performance geopolymer concrete (UHP-GPC)
13. F. Aslam, O. Zaid, F. Althoey, S.H. Alyami, S.M.A. Qaidi, J. de Prado Gil, R. Martínez-García, Evaluating the influence of fly ash and waste glass on the characteristics of coconut fibers reinforced concrete, Structural Concrete n/a(n/a).
14. Taking ultra-high-performance concrete to new heights
15. The relationship between substrate roughness parameters and bond strength of ultra high-performance fiber concrete10.1080/01694243.2012.761543 ↗
16. Evaluation of bond strength between normal concrete substrate and ultra high performance fiber concrete as a repair material10.1016/j.proeng.2013.03.050 ↗
17. Utilization of ultra-high performance fibre concrete (UHPFC) for rehabilitation–a review10.1016/j.proeng.2013.03.048 ↗
18. Flexural strength behavior of composite UHPFC-existing concrete10.4028/www.scientific.net/AMR.701.32 ↗
19. Effect of different curing conditions on the mechanical properties of UHPFC
20. Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC10.1080/01694243.2014.925386 ↗
21. Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash10.3151/jact.12.127 ↗
22. Properties of ultra-high performance fiber concrete (UHPFC) under different curing regimes
23. T.L. Vande Voort, M.T. Suleiman, S. Sritharan, Design and performance verification of UHPC piles for deep foundations, Iowa State University. Center for Transportation Research and Education, 2008.
24. A review on ultra high performance’ductile’concrete (UHPdC) technology
25. Application of ultra high performance fiber reinforced concrete–The Malaysia perspective
26. B.A. Tayeh, A.S. Aadi, N.N. Hilal, B.A. Bakar, M.M. Al-Tayeb, W.N. Mansour, Properties of ultra-high-performance fiber-reinforced concrete (UHPFRC)—A review paper, AIP Conference Proceedings, AIP Publishing LLC, 2019, p. 020040.10.1063/1.5126575 ↗
27. Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete10.1016/j.jclepro.2020.123073 ↗
28. W. Mansour, B.A. Tayeh, Shear behaviour of RC beams strengthened by various ultrahigh performance fibre-reinforced concrete systems, Advances in Civil Engineering 2020, 2020.10.1155/2020/2139054 ↗
29. Influence of polypropylene and steel fibers on the mechanical properties of ultra-high-performance fiber-reinforced geopolymer concrete
30. Rubberized geopolymer composites: a comprehensive review10.1016/j.ceramint.2022.06.123 ↗
31. S. Qaidi, Behaviour of Concrete Made of Recycled Waste PET and Confined with CFRP Fabrics, 2021.
32. Compressive strength of geopolymer concrete composites: a systematic comprehensive review, analysis and modeling
33. M. Berry, R. Snidarich, C. Wood, Development of non-proprietary ultra-high performance concrete, Montana. Dept. of Transportation. Research Programs, 2017.
34. Using glass sand as an alternative for quartz sand in UHPC10.1016/j.conbuildmat.2017.03.187 ↗
35. T.M. Ahlborn, D.L. Misson, E.J. Peuse, C.G. Gilbertson, Durability and strength characterization of ultra-high performance concrete under variable curing regimes, Proceedings of the 2nd International Symposium on Ultra-High Performance Concrete, Kassel, Germany, 2008, pp. 197–204.
36. J.C. Scheydt, H. Müller, Microstructure of ultra high performance concrete (UHPC) and its impact on durability, Proceedings of the 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, 2012, pp. 349–356.
37. Development of ultra-high performance concrete with high fire resistance10.1016/j.conbuildmat.2018.05.241 ↗
38. D. Heinz, F. Dehn, L. Urbonas, Fire resistance of ultra high performance concrete (UHPC)-Testing of laboratory samples and columns under load, International symposium on ultra high performance concrete, Kassel Germany, 2004, pp. 703–715.
39. J. Piérard, B. Dooms, N. Cauberg, Durability evaluation of different types of UHPC, Proceedings of the RILEM-fib-AFGC International Symposium on Ultra-High Performance Fiber-Reinforced Concrete, 2013, pp. 275–284.
40. Preparation and durability of a high performance concrete with natural ultra-fine particles
41. Effect of fiber hybridization on durability related properties of ultra-high performance concrete10.1007/s40069-017-0195-6 ↗
42. M. Berry, C. Wood, R. Snidarich, Development of Non-Proprietary Ultra High Performance Concrete: Final Presentation: November, 2017, Montana State University (Bozeman, Mont.). College of Engineering, 2017.
43. Experimental study of durability of reactive powder concretes10.1061/(ASCE)0899-1561(1996)8:1(1) ↗
44. L. Franke, H. Schmidt, G. Deckelmann, Behavior of ultra-high performance concrete with respect to chemical attack, Proceedings of the 2nd International Symposium on Ultra-High Performance Concrete, Kassel, Germany, 2008, pp. 453–460.
45. Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong10.1016/j.conbuildmat.2011.05.006 ↗
46. Evaluation and optimization of Ultra-High Performance Concrete (UHPC) subjected to harsh ocean environment: towards an application of Layered Double Hydroxides (LDHs)10.1016/j.conbuildmat.2018.03.210 ↗
47. Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete10.1016/j.conbuildmat.2005.07.001 ↗
48. P. Mehta, P. Monteiro, Concrete: microstructure, properties, and materials, McGraw-Hill Education2014.
49. E. Ghafari, H. Costa, E. Júlio, A. Portugal, L. Durães, Enhanced durability of ultra high performance concrete by incorporating supplementary cementitious materials, The Second International Conference Microdurability, Delft, Netherland, 2012.
50. Potential use of ultra high-performance fibre-reinforced concrete as a repair material for fire-damaged concrete in terms of bond strength10.30880/ijie.2020.12.09.011 ↗
51. Investigating the behaviour of hybrid fibre-reinforced reactive powder concrete beams after exposure to elevated temperatures10.1016/j.jmrt.2019.12.029 ↗
52. Microstructure and structural analysis of polypropylene fibre reinforced reactive powder concrete beams exposed to elevated temperature
53. Development of shear capacity equations for RC beams strengthened with UHPFRC
54. The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties10.1016/j.conbuildmat.2021.123279 ↗
55. Mechanical and durability properties of ultra-high performance concrete incorporated with various nano waste materials under different curing conditions
56. Mine tailings-based geopolymers: a comprehensive review10.1016/j.ceramint.2022.05.345 ↗
57. B.A.T. Shaker M.A. Qaidi, Abdullah M. Zeyad, Afonso R.G. de Azevedo, Hemn Unis Ahmed, Wael Emad, Recycling of mine tailings for the geopolymers production: A systematic review, Case Studies in Construction Materials, 2022.
58. B.A.T. Shaker M.A. Qaidi, Haytham F. Isleem, Afonso R.G. de Azevedo, Hemn Unis Ahmed, Wael Emad, Sustainable utilization of red mud waste (bauxite residue) and slag for the production of geopolymer composites: A review, Case Studies in Construction Materials, 2022.
59. Engineering properties of sustainable green concrete incorporating eco-friendly aggregate of crumb rubber: a review10.1016/j.jclepro.2021.129251 ↗
60. State-of-the-art review: concrete made of recycled waste PET as fine aggregate10.26682/csjuod.2020.23.2.34 ↗
61. S.M.A. Qaidi, Ultra-high-performance fiber-reinforced concrete: Challenges, 2022.10.20944/preprints202207.0271.v1 ↗
62. S.M.A. Qaidi, Ultra-high-performance fiber-reinforced concrete: Applications, 2022.10.20944/preprints202207.0271.v1 ↗
63. S.M.A. Qaidi, Ultra-high-performance fiber-reinforced concrete: Cost assessment, 2022.10.20944/preprints202207.0271.v1 ↗
64. Chloride binding of cement-based materials subjected to external chloride environment–a review10.1016/j.conbuildmat.2008.02.004 ↗
65. Corrosion by chlorides in reinforced concrete: Determination of chloride concentration threshold by impedance spectroscopy10.1016/j.cemconres.2003.11.009 ↗
66. Chloride induced reinforcement corrosion: Electrochemical monitoring of initiation stage and chloride threshold values10.1016/j.corsci.2011.01.025 ↗
67. The presentation of the chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
68. S.M.A. Qaidi, PET-concrete confinement with CFRP, 2021.
69. S.M.A. Qaidi, PET-Concrete, 2021.
70. S.M.A. Qaidi, Behavior of Concrete Made of Recycled PET Waste and Confined with CFRP Fabrics, College of Engineering, University of Duhok, 2021.
71. A. Mansi, N.H. Sor, N. Hilal, S.M. Qaidi, The Impact of Nano Clay on Normal and High-Performance Concrete Characteristics: A Review, IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2022, p. 012085.10.1088/1755-1315/961/1/012085 ↗
72. Effects of waste glass and waste marble on mechanical and durability performance of concrete10.1038/s41598-021-00994-0 ↗
73. Mechanical properties of eco-friendly cements-based glass powder in aggressive medium
74. Performance of self-compacting mortars modified with nanoparticles: a systematic review and modeling
75. C. ASTM, 1202, Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, ASTM International, 1997.
76. N. BUILD, 443, 1995] Nordtest Method NT Build 443 (1995), Essai d’immersion pour la détermination du coefficient de diffusion des chlorures en régime non stationnaire par mesure du profil de pénétration.
77. Durability and micro-structure of reactive powder concrete10.1007/s11595-009-3506-1 ↗
78. Durability analysis testing on reactive powder concrete10.4028/www.scientific.net/AMR.811.244 ↗
79. R.H. Faraj, H.U. Ahmed, S. Rafiq, N.H. Sor, D.F. Ibrahim, S.M. Qaidi, Cleaner Materials.
80. S.N. Ahmed, N.H. Sor, M.A. Ahmed, S.M.A. Qaidi, Thermal conductivity and hardened behavior of eco-friendly concrete incorporating waste polypropylene as fine aggregate, Materials Today: Proceedings, 2022.10.1016/j.matpr.2022.02.417 ↗
81. Compressive strength of geopolymer concrete modified with nano-silica: experimental and modeling investigations, case studies in construction
82. Compressive strength of sustainable geopolymer concrete composites: a state-of-the-art review10.3390/su132413502 ↗
83. M. Thomas, B. Green, E. O’Neal, V. Perry, S. Hayman, A. Hossack, Marine performance of UHPC at Treat Island, Proceedings of the 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, 2012, pp. 365–370.
84. Influence of nano-silica addition on durability of UHPC10.1016/j.conbuildmat.2015.07.009 ↗
85. Effect of steel fibers with galvanized coatings on corrosion of steel bars embedded in UHPC10.1016/j.compositesb.2019.107445 ↗
86. A. Rafiee, M. Schmidt, Computer Modeling and Investigation on the Chloride Induced Steel Corrosion in Cracked UHPC, Ultra-High Performance Concrete and Nanotechnology in Construction. Proceedings of Hipermat 2012. 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, kassel university press GmbH, 2012, p. 357.
87. Mohd Faizal · 2015 · 679
88. A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO210.1016/j.jhazmat.2004.04.019 ↗
89. Properties and micro/mecrostructure of reactive powder concrete
90. A. Cwirzen, V. Penttala, Effect of increased aggregate size on the mechanical and rheological properties of RPC, Proceedings of Second International Symposium on Advances in Concrete through Science and Engineering, Quebec, Canada, 2006.10.1617/2351580028.049 ↗
91. A preliminary study of reactive powder concrete as a new repair material10.1016/j.conbuildmat.2005.06.024 ↗
92. Fire performance of highly flowable reactive powder concrete10.1016/j.conbuildmat.2008.08.022 ↗
93. Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800C10.1016/j.nucengdes.2011.04.008 ↗
94. Compressive and tensile properties of reactive powder concrete with steel fibres at elevated temperatures10.1016/j.conbuildmat.2012.12.066 ↗
95. Durability and thermal stability of ultra high-performance fibre-reinforced concrete (UHPFRC) incorporating calcined clay10.1080/19648189.2016.1139508 ↗
96. High temperature behaviour of hybrid steel–PVA fibre reinforced reactive powder concrete10.1617/s11527-015-0537-2 ↗
97. Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature10.1016/j.matdes.2012.05.026 ↗
98. Experimental research on fire resistance of reactive powder concrete
99. Tensile properties of hybrid fiber-reinforced reactive powder concrete after exposure to elevated temperatures10.1007/s40069-016-0125-z ↗
100. Compressive stress–strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures10.1016/j.conbuildmat.2012.05.031 ↗