Real-time cure monitoring via carbon nanotube networks enables mechanical property optimization in post-cured epoxy resins
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Carbon Nanotubes in Composites · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Jin FL, Li X, Park SJ (2015) Synthesis and application of epoxy resins: a review. J Ind Eng Chem 29:1–1110.1016/j.jiec.2015.03.026 ↗
2. Yu S, Li X, Guo X, Li Z, Zou M (2019) Curing and characteristics of N, N, N′, N′-tetraepoxypropyl-4, 4′-diaminodiphenylmethane epoxy resin-based buoyancy material. Polymers 11(7):113710.3390/polym11071137 ↗
3. Jin FL, Park SJ (2008) Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils. Polym Int 57(4):577–58310.1002/pi.2280 ↗
4. Lascano D, Quiles-Carrillo L, Torres-Giner S, Boronat T, Montanes N (2019) Optimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness. Polymers 11(8):135410.3390/polym11081354 ↗
5. Kim RW, Kim CM, Hwang KH, Kim SR (2019) Embedded based real-time monitoring in the high-pressure resin transfer molding process for CFRP. Appl Sci 9(9):179510.3390/app9091795 ↗
6. Rudawska A (2019) The impact of the seasoning conditions on mechanical properties of modified and unmodified epoxy adhesive compounds. Polymers 11(5):80410.3390/polym11050804 ↗
7. Enns JB, Gillham JK (1983) Effect of the extent of cure on the modulus, glass transition, water absorption, and density of an amine-cured epoxy. J Appl Polym Sci 28(9):2831–284610.1002/app.1983.070280914 ↗
8. Ivankovic M, Incarnato L, Kenny JM, Nicolais L (2003) Curing kinetics and chemorheology of the epoxy/anhydride system. J Appl Polym Sci 90(11):3012–301910.1002/app.12976 ↗
9. Zilg C, Mülhaupt R, Finter J (1999) Morphology and toughness/stiffness balance of nanocomposites based upon anhydride-cured epoxy resins and layered silicates. Macromol Chem Phys 200(3):661–67010.1002/(SICI)1521-3935(19990301)200:3<661::AID-MACP661>3.0.CO;2-4 ↗
10. Zheng T, Wang X, Lu C, Zhang X, Ji Y, Bai C, Qiao Y (2019) Studies on curing kinetics and tensile properties of silica-filled phenolic amine/epoxy resin nanocomposite. Polymers 11(4):68010.3390/polym11040680 ↗
11. Guermazi N, Haddar N, Elleuch K, Ayedi HF (2014) Investigations on the fabrication and the characterization of glass/epoxy, carbon/epoxy and hybrid composites used in the reinforcement and the repair of aeronautic structures. Mater Des 1980–2015(56):714–72410.1016/j.matdes.2013.11.043 ↗
12. Park SJ, Seo MK, Lee JR (2000) Isothermal cure kinetics of epoxy/phenol-novolac resin blend system initiated by cationic latent thermal catalyst. J Polym Sci Part A 38(16):2945–295610.1002/1099-0518(20000815)38:16<2945::AID-POLA120>3.0.CO;2-6 ↗
13. Mostovoy S, Ripling EJ (1966) Fracture toughness of an epoxy system. J Appl Polym Sci 10(9):1351–137110.1002/app.1966.070100913 ↗
14. Kong ESW (2005) Physical aging in epoxy matrices and composites. Epoxy resins and composites IV. Springer, Berlin, pp 125–171
15. Fu K, Xie Q, Lü F, Duan Q, Wang X, Zhu Q, Huang Z (2019) Molecular dynamics simulation and experimental studies on the thermomechanical properties of epoxy resin with different anhydride curing agents. Polymers 11(6):97510.3390/polym11060975 ↗
16. Kenyon AS, Nielsen LE (1969) Characterization of network structure of epoxy resins by dynamic mechanical and liquid swelling tests. J Macromol Sci––Chem 3(2):275–29510.1080/10601326908053811 ↗
17. Carbas RJC, Marques EAS, Da Silva LFM, Lopes AM (2014) Effect of cure temperature on the glass transition temperature and mechanical properties of epoxy adhesives. J Adhes 90(1):104–11910.1080/00218464.2013.779559 ↗
18. Gillham JK (1986) Formation and properties of thermosetting and high Tg polymeric materials. Polym Eng Sci 26(20):1429–143310.1002/pen.760262012 ↗
19. Varley RJ, Hodgkin JH, Simon GP (2000) Toughening of trifunctional epoxy system. V. Structure–property relationships of neat resin. J Appl Polym Sci 77(2):237–24810.1002/(SICI)1097-4628(20000711)77:2<237::AID-APP1>3.0.CO;2-5 ↗
20. Ziaee S, Palmese GR (1999) Effects of temperature on cure kinetics and mechanical properties of vinyl–ester resins. J Polym Sci Part B 37(7):725–74410.1002/(SICI)1099-0488(19990401)37:7<725::AID-POLB23>3.0.CO;2-E ↗
21. Wisanrakkit G, Gillham JK (1990) The glass transition temperature (Tg) as an index of chemical conversion for a high-Tg amine/epoxy system: chemical and diffusion-controlled reaction kinetics. J Appl Polym Sci 41(11–12):2885–292910.1002/app.1990.070411129 ↗
22. Prime RB, Bair HE, Vyazovkin S, Gallagher PK, Riga A (2009) Thermogravimetric analysis (TGA). Thermal analysis of polymers: fundamentals and applications. Wiley, New Jersey, pp 241–31710.1002/9780470423837.ch3 ↗
23. Gan S, Gillham JK, Prime RB (1989) A methodology for characterizing reactive coatings: Time–temperature–transformation (TTT) analysis of the competition between cure, evaporation, and thermal degradation for an epoxy-phenolic system. J Appl Polym Sci 37(3):803–81610.1002/app.1989.070370316 ↗
24. Pethrick RA, Hollins EA, McEwan L, Pollock A, Hayward D, Johncock P (1996) Effect of cure temperature on the structure and water absorption of epoxy/amine thermosets. Polym Int 39(4):275–28810.1002/(SICI)1097-0126(199604)39:4<275::AID-PI508>3.0.CO;2-I ↗
25. Tucker SJ, Fu B, Kar S, Heinz S, Wiggins JS (2010) Ambient cure POSS–epoxy matrices for marine composites. Compos A Appl Sci Manuf 41(10):1441–144610.1016/j.compositesa.2010.06.005 ↗
26. Gupta VB, Drzal LT, Lee CC, Rich MJ (1985) The temperature-dependence of some mechanical properties of a cured epoxy resin system. Polym Eng Sci 25(13):812–82310.1002/pen.760251305 ↗
27. Barton JM, Hamerton I, Howlin BJ, Jones JR, Liu S (1998) Studies of cure schedule and final property relationships of a commercial epoxy resin using modified imidazole curing agents. Polymer 39(10):1929–193710.1016/S0032-3861(97)00372-8 ↗
28. Russo C, Fernández-Francos X, De la Flor S (2019) Rheological and mechanical characterization of dual-curing thiol-acrylate-epoxy thermosets for advanced applications. Polymers 11(6):99710.3390/polym11060997 ↗
29. Moller JC, Berry RJ, Foster HA (2020) On the nature of epoxy resin post-curing. Polymers 12(2):46610.3390/polym12020466 ↗
30. Zhang J, Li T, Wang H, Liu Y, Yu Y (2014) Monitoring extent of curing and thermal–mechanical property study of printed circuit board substrates. Microelectron Reliab 54(3):619–62810.1016/j.microrel.2013.11.010 ↗
31. Xie M, Zhang Z, Gu Y, Li M, Su Y (2009) A new method to characterize the cure state of epoxy prepreg by dynamic mechanical analysis. Thermochim Acta 487(1–2):8–1710.1016/j.tca.2009.01.001 ↗
32. Rudolph M, Naumann C, Stockmann M (2016) Degree of cure definition for an epoxy resin based on thermal diffusivity measurements. Mater Today 3(4):1144–1149
33. Kister G, Dossi E (2015) Cure monitoring of CFRP composites by dynamic mechanical analyser. Polym Testing 47:71–7810.1016/j.polymertesting.2015.08.009 ↗
34. Quintana JA, Boj PG, Villalvilla JM, Díaz-García MA, Ortiz J, Martín-Gomis L, Sastre-Santos Á (2008) Determination of the glass transition temperature of photorefractive polymer composites from photoconductivity measurements. Appl Phys Lett. https://doi.org/10.1063/1.283070710.1063/1.2830707 ↗
35. Yurov VM, Laurinas VC, Eremin EN, Gyngazova MS (2016) Determination of glass transition temperature for polymers by methods of thermoactivation spectroscopy. IOP Conf Ser 110(1):018
36. Mahato B, Lomov SV, Abaimov SG (2023) Quality control and cure status monitoring sensor based on industrial carbon nanotube masterbatch. In: 2023 IEEE 23rd International Conference on Nanotechnology (NANO), IEEE, pp 261–26510.1109/NANO58406.2023.10231314 ↗
37. Mahato B, Lomov SV, Jafarypouria M, Owais M, Abaimov SG (2023) Hierarchical toughening and self-diagnostic interleave for composite laminates manufactured from industrial carbon nanotube masterbatch. Compos Sci Technol 243:11024110.1016/j.compscitech.2023.110241 ↗
38. Zhao Y, Liu Q, Li R, Lomov SV, Abaimov SG, Xiong K, Wu Q (2023) Self-sensing and self-healing smart fiber-reinforced thermoplastic composite embedded with CNT film. J Intell Mater Syst Struct 34(13):1561–157110.1177/1045389X221147662 ↗
39. Mousavi SR, Estaji S, Kiaei H, Mansourian-Tabaei M, Nouranian S, Jafari SH, Khonakdar HA (2022) A review of electrical and thermal conductivities of epoxy resin systems reinforced with carbon nanotubes and graphene-based nanoparticles. Polym Test 112:10764510.1016/j.polymertesting.2022.107645 ↗
40. Lebedev OV, Ozerin AN, Abaimov SG (2021) Multiscale numerical modeling for prediction of piezoresistive effect for polymer composites with a highly segregated structure. Nanomaterials 11(1):16210.3390/nano11010162 ↗
41. Butt HA, Lomov SV, Akhatov IS, Abaimov SG (2021) Self-diagnostic carbon nanocomposites manufactured from industrial epoxy masterbatches. Compos Struct 259:11324410.1016/j.compstruct.2020.113244 ↗
42. Butt HA, Owais M, Sulimov A, Ostrizhiniy D, Lomov SV, Akhatov IS, Popov YA (2021) CNT/epoxy-masterbatch based nanocomposites: thermal and electrical properties. In: 2021 IEEE 21st International Conference on Nanotechnology (NANO), IEEE, pp. 417–42010.1109/NANO51122.2021.9514322 ↗
43. Lomov SV, Gudkov NA, Abaimov SG (2022) Uncertainties in electric circuit analysis of anisotropic electrical conductivity and piezoresistivity of carbon nanotube nanocomposites. Polymers 14(22):479410.3390/polym14224794 ↗
44. Lomov SV, Akmanov IS, Liu Q, Wu Q, Abaimov SG (2023) Negative temperature coefficient of resistance in aligned CNT networks: influence of the underlying phenomena. Polymers 15(3):67810.3390/polym15030678 ↗
45. Lomov SV, Akhatov IS, Lee J, Wardle BL, Abaimov SG (2021) Non-linearity of electrical conductivity for aligned multi-walled carbon nanotube nanocomposites: numerical estimation of significance of influencing factors. In: 2021 IEEE 21st International Conference on Nanotechnology (NANO), IEEE, pp. 378–38110.1109/NANO51122.2021.9514355 ↗
46. Zhang L, Lu Y, Lu S, Wang X, Ma C, Ma K (2022) In situ monitoring of sandwich structure in liquid composite molding process using multifunctional MXene/carbon nanotube sensors. Polym Compos 43(4):2252–226310.1002/pc.26537 ↗
47. Luo S, Obitayo W, Liu T (2014) SWCNT-thin-film-enabled fiber sensors for lifelong structural health monitoring of polymeric composites-From manufacturing to utilization to failure. Carbon 76:321–32910.1016/j.carbon.2014.04.083 ↗
48. Lee J, Wardle BL (2019) Nanoengineered in situ cure status monitoring technique based on carbon nanotube network. In: AIAA Scitech 2019 Forum, p. 119910.2514/6.2019-1199 ↗
49. Lu S, Chen D, Wang X, Xiong X, Ma K, Zhang L, Meng Q (2016) Monitoring the manufacturing process of glass fiber reinforced composites with carbon nanotube buckypaper sensor. Polym Test 52:79–8410.1016/j.polymertesting.2016.04.007 ↗
50. Lu S, Zhao C, Zhang L, Ma K, Bai Y, Wang X, Du K (2019) In situ monitoring the manufacturing process of polymer composites with highly flexible and sensitive GNP/MWCNT film sensors. Sens Actuators A 285:127–13310.1016/j.sna.2018.11.016 ↗
51. Xing F, Li M, Wang S, Gu Y, Zhang W, Wang Y (2022) Temperature dependence of electrical resistance in carbon nanotube composite film during curing process. Nanomaterials 12:355210.3390/nano12203552 ↗
52. Lu S, Zhao C, Zhang L, Chen D, Chen D, Wang X, Ma K (2018) Real time monitoring of the curing degree and the manufacturing process of fiber reinforced composites with a carbon nanotube buckypaper sensor. RSC Adv 8(39):22078–2208510.1039/C8RA03445A ↗
53. Lu S, Chen D, Wang X, Xiong X, Ma K, Zhang L, Meng Q (2017) Monitoring the glass transition temperature of polymeric composites with carbon nanotube buckypaper sensor. Polym Test 57:12–1610.1016/j.polymertesting.2016.11.008 ↗
54. Shiverskii AV, Owais M, Mahato B, Abaimov SG (2023) Electrical heaters for anti/de-icing of polymer structures. Polymers 15(6):157310.3390/polym15061573 ↗
55. Akmanov IS, Lomov SV, Spasennykh MY, Abaimov SG (2025) Machine learning for nano-level defect detection in aligned random carbon nanotubes-reinforced electrically conductive nanocomposite. Compos Struct 352:11865110.1016/j.compstruct.2024.118651 ↗
56. Akmanov IS, Lomov SV, Spasennykh MY, Abaimov SG (2024) Machine learning for crack detection in an anisotropic electrically conductive nano-engineered composite interleave with realistic geometry. Int J Eng Sci 205:10417110.1016/j.ijengsci.2024.104171 ↗
57. Jafarypouria M, Mahato B, Abaimov SG (2023) Separating curing and temperature effects on the temperature coefficient of resistance for a single-walled carbon nanotube nanocomposite. Polymers 15(2):43310.3390/polym15020433 ↗
58. Abaimov SG, Abaimov SG (2015) The theory of percolation. Statistical physics of non-thermal phase transitions: from foundations to applications. Springer, Cham, pp 225–25710.1007/978-3-319-12469-8_4 ↗
59. Gudkov NA, Lomov SV, Akhatov IS, Abaimov SG (2022) Conductive CNT-polymer nanocomposites digital twins for self-diagnostic structures: sensitivity to CNT parameters. Compos Struct 291:11561710.1016/j.compstruct.2022.115617 ↗
60. Feng C, Jiang L (2013) Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites. Compos A Appl Sci Manuf 47:143–14910.1016/j.compositesa.2012.12.008 ↗
61. Zhang S, Park JG, Nguyen N, Jolowsky C, Hao A, Liang R (2017) Ultra-high conductivity and metallic conduction mechanism of scale-up continuous carbon nanotube sheets by mechanical stretching and stable chemical doping. Carbon 125:649–65810.1016/j.carbon.2017.09.089 ↗
62. Wang L, Peng W, Sarafbidabad M, Zare Y (2019) Explanation of main tunneling mechanism in electrical conductivity of polymer/carbon nanotubes nanocomposites by interphase percolation. Polym Bull 76:5717–573110.1007/s00289-018-2669-3 ↗
63. Uçar E, Dogu M, Demirhan E, Krause B (2023) PMMA/SWCNT composites with very low electrical percolation threshold by direct incorporation and masterbatch dilution and characterization of electrical and thermoelectrical properties. Nanomaterials 13(8):143110.3390/nano13081431 ↗
64. Haghgoo M, Ansari R, Hassanzadeh-Aghdam MK, Nankali M (2019) Analytical formulation for electrical conductivity and percolation threshold of epoxy multiscale nanocomposites reinforced with chopped carbon fibers and wavy carbon nanotubes considering tunneling resistivity. Compos A Appl Sci Manuf 126:10561610.1016/j.compositesa.2019.105616 ↗
65. Mahato B (2023) Multifunctional interleaves for composite laminate. Skoltech, Moscow
66. Vertuccio L, Russo S, Raimondo M, Lafdi K, Guadagno L (2015) Influence of carbon nanofillers on the curing kinetics of epoxy-amine resin. RSC Adv 5(110):90437–9045010.1039/C5RA14343H ↗
67. Birger S, Moshonov A, Kenig S (1989) Failure mechanisms of graphite-fabric epoxy composites subjected to flexural loading. Composites 20(2):136–14410.1016/0010-4361(89)90641-1 ↗
68. Patel A, Kravchenko O, Manas-Zloczower I (2018) Effect of curing rate on the microstructure and macroscopic properties of epoxy fiberglass composites. Polymers 10(2):12510.3390/polym10020125 ↗
69. Sorrentino L, Esposito L, Bellini C (2017) A new methodology to evaluate the influence of curing overheating on the mechanical properties of thick FRP laminates. Compos B Eng 109:187–19610.1016/j.compositesb.2016.10.064 ↗
70. Li Y, Li Q, Ma H (2015) The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites. Compos A Appl Sci Manuf 72:40–4810.1016/j.compositesa.2015.01.029 ↗
71. Liu L, Zhang BM, Wang DF, Wu ZJ (2006) Effects of cure cycles on void content and mechanical properties of composite laminates. Compos Struct 73(3):303–30910.1016/j.compstruct.2005.02.001 ↗
72. Yumalin T, Salikhov T, Mahato B, Shiverskii A, Abaimov S, Salikhov R (2024) CNT thin films based on epoxy mixtures: fabrication, electrical characteristics. Chim Technol Acta 11(2):20241120510.15826/chimtech.2024.11.2.05 ↗
73. Burstein E, Lundqvist S (eds) (1969) Tunneling phenomena in solids. Plenum Press, New York, pp 427–44210.1007/978-1-4684-1752-4_29 ↗
74. Terrones J, Windle AH, Elliott JA (2014) The electro-structural behaviour of yarn-like carbon nanotube fibres immersed in organic liquids. Sci Technol Adv Mater 15(5):05500810.1088/1468-6996/15/5/055008 ↗