Improvement of oxidation resistance of graphite by aluminosilicate coating with aluminum metaphosphate interlayer
Source abstract
Abstract
In this research, in order to increase the oxidation resistance of graphite, kaolin and alumina powder with different ratios (26A-74S, 49A-51S, 72A-28S) and slurry method were used to create an aluminosilicate coating on the graphite substrate. In order to reduce the difference in the coefficients of thermal expansion of graphite with aluminosilicate coating, aluminum metaphosphate coating as an interlayer was prepared on the surface of graphite by cathodic electrochemical treatment. The isothermal oxidation test of the samples was carried out in air at a temperature of 1250 °C for 1, 3 and 5 h. The microstructure, chemical composition, and phase components of the coating were, respectively, analyzed by scanning electron microscope equipped with an energy-dispersive spectrometer and X-ray diffraction. The results indicated that, by increasing the withdrawal speed of the samples in slurry method, the amount of changes in the weight of the samples has increased and therefore had a direct effect on oxidation. In addition, it was approved that, at high-temperature oxidation, AlPO4 glass phase forms on aluminum metaphosphate interlayer which retards graphite oxidation. Along with aluminum metaphosphate, aluminosilicate coating also produces a glass phase which fills and seals the voids on the surface which prevents the oxygen to reach the surface of graphite. The created double-layer coating including an interlayer of aluminum metaphosphate + slurry coating prepared with the ratio of 26A-74S as the optimal coating in this research was able to increase the oxidation resistance of graphite by 73% at a temperature of 1250 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Graphene research and applications · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Zhang H, Zhang X, Li D, Zhuang J, Liu Y, Liu H, Wu D, Feng J, Sun J (2022) Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@ rGO hybrid fillers. Adv Compos Hybrid Mater 5(3):1756–176810.1007/s42114-021-00414-x ↗
2. Luo X, Yang G, Schubert DW (2022) Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy. Adv Compos Hybrid Mater 5:250–26210.1007/s42114-021-00332-y ↗
3. Xie Y, Yang Y, Liu Y, Wang S, Guo X, Wang H, Cao D (2021) Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof. Adv Compos Hybrid Mater 4:543–55110.1007/s42114-021-00249-6 ↗
4. Zhang Z, Liu M, Ibrahim MM, Wu H, Wu Y, Li Y, Mersal GA, El Azab IH, El-Bahy SM, Huang M, Jiang Y, Liang G, Xie P, Liu C (2022) Flexible polystyrene/graphene composites with epsilon-near-zero properties. Adv Compos Hybrid Mater 5(2):1054–106610.1007/s42114-022-00486-3 ↗
5. Xie P, Shi Z, Feng M, Sun K, Liu Y, Yan K, Liu C, Moussa TA, Huang M, Meng S, Liang G, Hou H, Fan R, Guo Z (2022) Recent advances in radio-frequency negative dielectric metamaterials by designing heterogeneous composites. Adv Compos Hybrid Mater 5(2):679–69510.1007/s42114-022-00479-2 ↗
6. Liu M, Wu H, Wu Y, Xie P, Pashameah RA, Abo-Dief HM, El-Bahy SM, Wei Y, Li G, Li W, Liang G, Liu C, Sun K, Fan R (2022) The weakly negative permittivity with low-frequency-dispersion behavior in percolative carbon nanotubes/epoxy nanocomposites at radio-frequency range. Adv Compos Hybrid Mater 5(3):2021–203010.1007/s42114-022-00541-z ↗
7. Wu H, Zhong Y, Tang Y, Huang Y, Liu G, Sun W, Guo Z (2021) Precise regulation of weakly negative permittivity in CaCu3Ti4O12 metacomposites by synergistic effects of carbon nanotubes and grapheme. Adv Compos Hybrid Mater 5:419–43010.1007/s42114-021-00378-y ↗
8. Dallaire S (1987) Protection of graphite electrodes from oxidation. Surf Coat Technol 32(1–4):141–15210.1016/0257-8972(87)90103-4 ↗
9. Westwood ME, Webster JD, Day RJ, Hayes FH, Taylor R (1996) Oxidation protection for carbon fiber composites. J Mater Sci 31:1389–139710.1007/BF00357844 ↗
10. Kerans RJ, Katz AP (2013) High-temperature engineering ceramics. In: Riedel R, Chen I-W (eds) Ceramics science and technology. Wiley, Hoboken, pp 169–190
11. Luthra KL (1988) Oxidation of carbon/carbon composites—a theoretical analysis. Carbon 26(2):217–22410.1016/0008-6223(88)90040-1 ↗
12. Upadhya K (1993) High performance high temperature materials for rocket engines and space environment. ASM International, Materials Park, pp 1–9
13. Yin X, Gotman I, Klinger L, Gutmanas EY (2005) Formation of titanium carbide on graphite via powder immersion reaction assisted coating. Mater Sci Eng A 396(1–2):107–11410.1016/j.msea.2005.01.011 ↗
14. Jafari H, Ehsani N, Khalifeh-Soltani SA, Jalaly M (2013) Nano-SiC/SiC anti-oxidant coating on the surface of graphite. Appl Surf Sci 264:128–13210.1016/j.apsusc.2012.09.139 ↗
15. Zhu Q, Qiu X, Ma C (1999) Oxidation resistant SiC coating for graphite materials. Carbon 37(9):1475–148410.1016/S0008-6223(99)00010-X ↗
16. Yoo HI, Kim HS, Hong BG, Sihn IC, Lim KH, Lim BJ, Moon SY (2016) Hafnium carbide protective layer coatings on carbon/carbon composites deposited with a vacuum plasma spray coating method. J Eur Ceram Soc 36(7):1581–158710.1016/j.jeurceramsoc.2016.01.032 ↗
17. Kobayashi K, Maeda K, Sano H, Uchiyama Y (1995) Formation and oxidation resistance of the coating formed on carbon material composed of B4C-SiC powders. Carbon 33(4):397–40310.1016/0008-6223(94)00164-U ↗
18. Zhu YC, Ohtani S, Sato Y, Iwamoto N (1999) Formation of a functionally gradient (Si3N4+ SiC)/C layer for the oxidation protection of carbon–carbon composites. Carbon 37(9):1417–142310.1016/S0008-6223(99)00003-2 ↗
19. Liu Y, Treadwell DR, Kannisto MR, Mueller BL, Laine RM (1997) Titanium nitride/carbon coatings on graphite fibers. J Am Ceram Soc 80(3):705–71610.1111/j.1151-2916.1997.tb02888.x ↗
20. Jaschek R, Rüssel C (1992) Aluminium and titanium nitride coatings on graphite, prepared by pyrolysis of a polymeric precursor film. Thin Solid Films 208(1):7–1010.1016/0040-6090(92)90938-8 ↗
21. Tsou HT, Kowbel WB (1996) Design of multilayer plasma-assisted CVD coatings for the oxidation protection of composite materials. Surf Coat Technol 79(1–3):139–15010.1016/0257-8972(95)02424-7 ↗
22. Hashishin T, Murashita J, Joyama A, Kaneko Y (1998) Oxidation-resistant coating of carbon fibers with TiO2 by sol-gel method. J Ceram Soc Jpn 106(1229):1–510.2109/jcersj.106.1 ↗
23. Hoffman WP, Phan HT, Groszek A (1995) The deposition of silica on carbon as a model system for oxidation protection coatings. Carbon 33(4):509–52410.1016/0008-6223(94)00176-Z ↗
24. Parashar VK, Raman V, Bahl OP (1997) Oxidation resistant material for carbon/carbon composites by the sol-gel process. J Mater Sci Lett 16(6):479–48110.1023/A:1018520511748 ↗
25. Kawabata K, Yoshimatsu H, Fujiwara K, Mihashi H, Hiragushi K, Osaka A, Miura Y (1999) Oxidation resistance of graphite powders coated with Al2O3-based oxides. J Ceram Soc Jpn 107(1249):832–83710.2109/jcersj.107.832 ↗
26. Yamamoto O, Sasamoto T, Inagaki M (1995) Antioxidation of carbon-carbon composites by SiC concentration gradient and zircon overcoating. Carbon 33(4):359–36510.1016/0008-6223(94)00159-W ↗
27. Landry CC, Barron AR (1995) MOCVD of alumina-silica oxidation resistant coatings on carbon fibers. Carbon 33(4):381–38710.1016/0008-6223(94)00162-S ↗
28. Fergus JW, Worrell WL (1995) Silicon-carbide/boron-containing coatings for the oxidation protection of graphite. Carbon 33(4):537–54310.1016/0008-6223(94)00178-3 ↗
29. Wang P, Han W, Zhang X, Li N, Zhao G, Zhou S (2015) (ZrB2–SiC)/SiC oxidation protective coatings for graphite materials. Ceram Int 41(5):6941–694910.1016/j.ceramint.2015.01.149 ↗
30. Jiang Y, Feng D, Ru H, Wang W, Zhang C (2018) Oxidation protective ZrB2–MoSi2–SiC–Si coating for graphite materials prepared by slurry dipping and vapor silicon infiltration. Surf Coat Technol 339:91–10010.1016/j.surfcoat.2018.02.027 ↗
31. Xia JY, Tang MT, Cui CHEN, Jin SM, Chen YM (2012) Preparation of α-Bi2O3 from bismuth powders through low-temperature oxidation. Trans Nonferrous Met Soc China 22(9):2289–229410.1016/S1003-6326(11)61462-3 ↗
32. Lu W, Chung DDL (2002) Oxidation protection of carbon materials by acid phosphate impregnation. Carbon 40(8):1249–125410.1016/S0008-6223(01)00297-4 ↗
33. Yamamoto O, Sasamoto T, Inagaki M (2000) Effect of mullite coating film on oxidation resistance of carbon materials with SiC-gradient. J Mater Sci Lett 19(12):1053–105510.1023/A:1006747305264 ↗
34. Schrijnemakers S, André G (2009) Mullite coatings on ceramic substrates: stabilisation of Al2O3–SiO2 suspensions for spray drying of composite granules suitable for reactive plasma spraying. J Eur Ceram Soc 29:2169–217510.1016/j.jeurceramsoc.2009.01.031 ↗
35. Schneider H, Schreurer J, Hildmann B (2008) Structure and properties of mullite-a review. J Eur Ceram Soc 28:329–34410.1016/j.jeurceramsoc.2007.03.017 ↗
36. Aksay IA, Dabbs DM, Sarikaya M (1991) Mullite for structural, electronic, and optical applications. J Am Ceram Soc 74(10):2343–235810.1111/j.1151-2916.1991.tb06768.x ↗
37. Jian-Feng H, Xie-Rong Z, He-Jun L, Xin-Bo X, Min H (2003) Mullite-Al2O3–-iC oxidation protective coating for carbon/carbon composites. Carbon 41(14):2825–282910.1016/S0008-6223(03)00397-X ↗
38. Schneider H, Komarneni S (eds) (2006) Mullite. Wiley, Hoboken
39. Wachtman JB, Haber RA (1986) Ceramic films and coatings. Chem Eng Prog (United States) 82(1):5
40. Francis LF, Roberts CC (2016) Dispersion and solution processes. In: Materials processing: a unified approach to processing of metals, ceramics and polymers. Academic Press, pp 1–59710.1016/B978-0-12-385132-1.00006-9 ↗
41. de Macedo-Neto JC, do Nascimento NR, Bello RH, de Verçosa LA, Neto JE, da Costa JCM, Rol F (2021) Kaolinite review: intercalation and production of polymer nanocomposites. Eng Sci 17:28–44
42. Gugtapeh HS, Jafarzadeh K, Valefi Z (2019) Oxidation protection of aluminum metaphosphate coating prepared by cathodic electrochemical treatment for graphite. Ceram Int 45(13):15815–1582310.1016/j.ceramint.2019.05.084 ↗
43. Vast PH (2009) Oxidation protection for carbon materials by oxifluoride phosphate compounds. In: 19th annual conference on composites, advanced ceramics, materials, and structures-B: ceramic engineering and science proceedings, vol 16. Wiley, p 106310.1002/9780470314784.ch50 ↗
44. Liyun C, Qun M, Jianfeng H, Xinping Y (2010) Influence of hydrothermal treatment temperature on oxidation modification of C/C composites with aluminum phosphates solution by a microwave hydrothermal process. Corros Sci 52(11):3757–376210.1016/j.corsci.2010.07.026 ↗
45. Jegannathan S, Narayanan TS, Ravichandran K, Rajeswari S (2006) Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment. Surf Coat Technol 200(12–13):4117–412610.1016/j.surfcoat.2005.04.022 ↗
46. Jegannathan S, Arumugam TK, Narayanan TS, Ravichandran K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: cathodic vs. anodic. Prog Organic Coat 65(2):229–23610.1016/j.porgcoat.2008.11.009 ↗
47. Jegannathan S, Narayanan TS, Ravichandran K, Rajeswari S (2005) Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests. Electrochim Acta 51(2):247–25610.1016/j.electacta.2005.04.020 ↗
48. Kavitha C, Narayanan TS, Ravichandran K, Park IS, Lee MH (2014) Deposition of zinc–zinc phosphate composite coatings on steel by cathodic electrochemical treatment. J Coat Technol Res 11(3):431–44210.1007/s11998-013-9533-z ↗
49. Jia Y, Wan H, Chen L, Zhou H, Chen J (2017) Effects of phosphate binder on the lubricity and wear resistance of graphite coating at elevated temperatures. Surf Coat Technol 315:490–49710.1016/j.surfcoat.2017.03.013 ↗
50. Li C, Chen X, Shen L, Bao N (2020) Revisiting the oxidation of graphite: reaction mechanism, chemical stability, and structure self-regulation. ACS Omega 5(7):3397–340410.1021/acsomega.9b03633 ↗
51. Rahier H, Wullaert B, Van Mele B (2000) Influence of the degree of dehydroxylation of kaolinite on the properties of aluminosilicate glasses. J Therm Anal Calorim 62(2):417–42710.1023/A:1010138130395 ↗
52. Tricot G, Coillot D, Creton E, Montagne L (2008) New insights into the thermal evolution of aluminophosphate solutions: a complementary XRD and solid state NMR study. J Eur Ceram Soc 28(6):1135–114110.1016/j.jeurceramsoc.2007.09.046 ↗
53. Smeacetto F, Salvo M, Ferraris M (2002) Oxidation protective multilayer coatings for carbon–carbon composites. Carbon 40(4):583–58710.1016/S0008-6223(01)00151-8 ↗
54. Srikrishna K, Thomas G, Martinez R, Corral MP, De Aza S, Moya JS (1990) Kaolinite-mullite reaction series: a TEM study. J Mater Sci 25(1):607–61210.1007/BF00714083 ↗
55. Chen CY, Lan GS, Tuan WH (2000) Microstructural evolution of mullite during the sintering of kaolin powder compacts. Ceram Int 26(7):715–72010.1016/S0272-8842(00)00009-2 ↗
56. Khabbouchi M, Hosni K, Mezni M, Zanelli C, Doggy M, Dondi M, Srasra E (2017) Interaction of metakaolin-phosphoric acid and their structural evolution at high temperature. Appl Clay Sci 146:510–51610.1016/j.clay.2017.07.006 ↗