Recent advances of Na3V2(PO4)3 as cathode for rechargeable zinc-based batteries
Source abstract
Abstract
Rechargeable zinc-based batteries (RZBs) with the advantages of high safety, low cost, abundant resources and environmental friendliness, are considered as advanced secondary battery systems that can be applied to large-scale energy storage. As an important cathode material for RZBs, NASICON-type Na3V2(PO4)3 (NVP) possesses three-dimensional and large-scale ion channels that facilitate the rapid diffusion of Zn2+, and has a higher average operating voltage compared with other vanadium-based compounds, thus exhibiting the possibility of realizing RZBs with high energy density. However, NVP still has some problems, such as poor electronic conductivity and spontaneous dissolution in aqueous solution. The sluggish kinetics of Zn2+ (de)intercalation in NVP and dendritic growth on the Zn anode also contribute to the poor rate performance and short cycle life of the batteries. In this review, optimization strategies for the electrochemical performance of RZBs with NVP as cathode are systematically elaborated, including modification of NVP cathode and optimization of electrolyte. Several mainstream energy storage mechanisms and analysis methods in this battery system are sorted out and summarized. On this basis, the development direction of NVP–RZB system is further prospected.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Chu S, Majumdar A (2012) Opportunities and challenges for a sustainable energy future. Nature 488(7411):294–30310.1038/nature11475 ↗
2. Stougie L, Giustozzi N, van der Kooi H et al (2018) Environmental, economic and exergetic sustainability assessment of power generation from fossil and renewable energy sources. Int J Energy Res 42(9):2916–292610.1002/er.4037 ↗
3. Yang YQ, Bremner S, Menictas C et al (2018) Battery energy storage system size determination in renewable energy systems: a review. Renewable Sustainable Energy Rev 91:109–12510.1016/j.rser.2018.03.047 ↗
4. Yu ZJ, Zhang XY, Fu CK et al (2021) Dendrites in solid-state batteries: ion transport behavior, advanced characterization, and interface regulation. Adv Energy Mater 11(18):200325010.1002/aenm.202003250 ↗
5. Abraham KM (2015) Prospects and limits of energy storage in batteries. J Phys Chem Lett 6(5):830–84410.1021/jz5026273 ↗
6. Li M, Lu J, Chen ZW et al (2018) 30 years of lithium-ion batteries. Adv Mater 30(33):180056110.1002/adma.201800561 ↗
7. Sarma DD, Shukla AK (2018) Building better batteries: a travel back in time. ACS Energy Lett 3(11):2841–284510.1021/acsenergylett.8b01966 ↗
8. Yoshino A (2012) The birth of the lithium-ion battery. Angew Chem Int Ed 51(24):5798–580010.1002/anie.201105006 ↗
9. Fang GZ, Zhou J, Pan AQ et al (2018) Recent advances in aqueous zinc-ion batteries. ACS Energy Lett 3(10):2480–250110.1021/acsenergylett.8b01426 ↗
10. Li HF, Ma LT, Han CP et al (2019) Advanced rechargeable zinc-based batteries: recent progress and future perspectives. Nano Energy 62:550–58710.1016/j.nanoen.2019.05.059 ↗
11. Ming J, Guo J, Xia C et al (2019) Zinc-ion batteries: materials, mechanisms, and applications. Mater Sci Eng R 135:58–8410.1016/j.mser.2018.10.002 ↗
12. Selvakumaran D, Pan AQ, Liang SQ et al (2019) A review on recent developments and challenges of cathode materials for rechargeable aqueous Zn-ion batteries. J Mater Chem A 7(31):18209–1823610.1039/C9TA05053A ↗
13. Song M, Tan H, Chao DL et al (2018) Recent advances in Zn-Ion batteries. Adv Funct Mater 28(41):180256410.1002/adfm.201802564 ↗
14. Alfaruqi MH, Mathew V, Gim J et al (2015) Electrochemically induced structural transformation in a γ-MnO2 cathode of a high capacity zinc-ion battery system. Chem Mater 27(10):3609–362010.1021/cm504717p ↗
15. Guo C, Liu HM, Li JF et al (2019) Ultrathin δ-MnO2 nanosheets as cathode for aqueous rechargeable zinc ion battery. Electrochim Acta 304:370–37710.1016/j.electacta.2019.03.008 ↗
16. Islam S, Alfaruqi MH, Mathew V et al (2017) Facile synthesis and the exploration of the zinc storage mechanism of β-MnO2 nanorods with exposed (101) planes as a novel cathode material for high performance eco-friendly zinc-ion batteries. J Mater Chem A 5(44):23299–2330910.1039/C7TA07170A ↗
17. Khamsanga S, Pornprasertsuk R, Yonezawa T et al (2019) δ-MnO2 nanoflower/graphite cathode for rechargeable aqueous zinc ion batteries. Sci Rep 9(1):844110.1038/s41598-019-44915-8 ↗
18. Wang CY, Wang MQ, He ZC et al (2020) Rechargeable aqueous zinc-manganese dioxide/graphene batteries with high rate capability and large capacity. ACS Appl Energy Mater 3(2):1742–174810.1021/acsaem.9b02220 ↗
19. Wei CG, Xu CJ, Li BH et al (2012) Preparation and characterization of manganese dioxides with nano-sized tunnel structures for zinc ion storage. J Phys Chem Solids 73(12):1487–149110.1016/j.jpcs.2011.11.038 ↗
20. Trócoli R, Mantia FL (2015) An aqueous zinc-ion battery based on copper hexacyanoferrate. Chemsuschem 8(3):481–48510.1002/cssc.201403143 ↗
21. Zhang LY, Chen L, Zhou XF et al (2015) Towards high-voltage aqueous metal-ion batteries beyond 1.5 V: the Zinc/Zinc hexacyanoferrate system. Adv Energy Mater 5(2):140093010.1002/aenm.201400930 ↗
22. Zhang LY, Chen L, Zhou XF et al (2015) Morphology-dependent electrochemical performance of zinc hexacyanoferrate cathode for zinc-ion battery. Sci Rep 5(1):1826310.1038/srep18263 ↗
23. Hu P, Yan MY, Zhu T et al (2017) Zn/V2O5 aqueous hybrid-ion battery with high voltage platform and long cycle life. ACS Appl Mater Interfaces 9(49):42717–4272210.1021/acsami.7b13110 ↗
24. Chen XY, Wang LB, Li H et al (2019) Porous V2O5 nanofibers as cathode materials for rechargeable aqueous zinc-ion batteries. J Energy Chem 38:20–2510.1016/j.jechem.2018.12.023 ↗
25. Wang XY, Ma LW, Sun JC (2019) Vanadium pentoxide nanosheets in-situ spaced with acetylene black as cathodes for high-performance zinc-ion batteries. ACS Appl Mater Interfaces 11(44):41297–4130310.1021/acsami.9b13103 ↗
26. Yan MY, He P, Chen Y et al (2018) Water-lubricated intercalation in V2O5·nH2O for high-capacity and high-rate aqueous rechargeable zinc batteries. Adv Mater 30(1):170372510.1002/adma.201703725 ↗
27. Park J-S, Jo JH, Aniskevich Y et al (2018) Open-structured vanadium dioxide as an intercalation host for Zn ions: investigation by first-principles calculation and experiments. Chem Mater 30(19):6777–678710.1021/acs.chemmater.8b02679 ↗
28. Chen LL, Yang ZH, Huang YG (2019) Monoclinic VO2(D) hollow nanospheres with super-long cycle life for aqueous zinc ion batteries. Nanoscale 11(27):13032–1303910.1039/C9NR03129D ↗
29. Zhang LS, Miao L, Zhang B et al (2020) A durable VO2(M)/Zn battery with ultrahigh rate capability enabled by pseudocapacitive proton insertion. J Mater Chem A 8(4):1731–174010.1039/C9TA11031C ↗
30. He P, Yan MY, Zhang GB et al (2017) Layered VS2 nanosheet-based aqueous Zn ion battery cathode. Adv Energy Mater 7(11):160192010.1002/aenm.201601920 ↗
31. Qin HG, Yang ZH, Chen LL et al (2018) A high-rate aqueous rechargeable zinc ion battery based on the VS4@rGO nanocomposite. J Mater Chem A 6(46):23757–2376510.1039/C8TA08133F ↗
32. Jian ZL, Zhao L, Pan HL et al (2012) Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries. Electrochem Commun 14(1):86–8910.1016/j.elecom.2011.11.009 ↗
33. Jian ZL, Han WZ, Lu X et al (2013) Superior electrochemical performance and storage mechanism of Na3V2(PO4)3 cathode for room-temperature sodium-ion batteries. Adv Energy Mater 3(2):156–16010.1002/aenm.201200558 ↗
34. Liu XH, Feng GL, Wu ZG et al (2020) Investigating the influence of sodium sources towards improved Na3V2(PO4)3 cathode of sodium-ion batteries. J Alloys Compd 815:152430
35. Xu JY, Gu EL, Zhang ZZ et al (2020) Fabrication of porous Na3V2(PO4)3/reduced graphene oxide hollow spheres with enhanced sodium storage performance. J Colloid Interface Sci 567:84–9110.1016/j.jcis.2020.01.121 ↗
36. Sun SQ, Chen YJ, Bai Q et al (2022) Unraveling the modified regulation of ternary substitution on Na3V2(PO4)3 for sodium ion batteries. J Mater Chem A 10(21):11340–1135310.1039/D2TA02647C ↗
37. Li GL, Yang Z, Jiang Y et al (2016) Hybrid aqueous battery based on Na3V2(PO4)3/C cathode and zinc anode for potential large-scale energy storage. J Power Sources 308:52–5710.1016/j.jpowsour.2016.01.058 ↗
38. Li GL, Yang Z, Jiang Y et al (2016) Towards polyvalent ion batteries: a zinc-ion battery based on NASICON structured Na3V2(PO4)3. Nano Energy 25:211–21710.1016/j.nanoen.2016.04.051 ↗
39. Li W, Wang KL, Zhou M et al (2018) Advanced low-cost, high-voltage, long-life aqueous hybrid sodium/zinc batteries enabled by a dendrite-free zinc anode and concentrated electrolyte. ACS Appl Mater Interfaces 10(26):22059–2206610.1021/acsami.8b04085 ↗
40. Islam S, Alfaruqi MH, Putro DY et al (2018) Pyrosynthesis of Na3V2(PO4)3@C cathodes for safe and low-cost aqueous hybrid batteries. Chemsuschem 11(13):2239–224710.1002/cssc.201800724 ↗
41. Hu P, Zhu T, Wang XP et al (2019) Aqueous Zn//Zn(CF3SO3)2//Na3V2(PO4)3 batteries with simultaneous Zn2+/Na+ intercalation/de-intercalation. Nano Energy 58:492–49810.1016/j.nanoen.2019.01.068 ↗
42. Dong Y, Di SL, Zhang FB et al (2020) Nonaqueous electrolyte with dual-cations for high-voltage and long-life zinc batteries. J Mater Chem A 8(6):3252–326110.1039/C9TA13068C ↗
43. Zhang XH, Chen HL, Liu WL et al (2020) A long-cycling aqueous zinc-ion pouch cell: NASICON-type material and surface modification. Chem Asian J 15(9):1430–143510.1002/asia.202000162 ↗
44. Ni Q, Jiang H, Sandstrom S et al (2020) A Na3V2(PO4)2O1.6F1.4 cathode of Zn-ion battery enabled by a water-in-bisalt electrolyte. Adv Funct Mater 30(36):200351110.1002/adfm.202003511 ↗
45. Li Q, Ma KX, Hong C et al (2021) Realizing excellent cycle stability of Zn/Na3V2(PO4)3 batteries by suppressing dissolution and structural degradation in non-aqueous Na/Zn dual-salt electrolytes. Sci China Mater 64(6):1386–139510.1007/s40843-020-1550-2 ↗
46. Wang J, Qiu HY, Zhao ZM et al (2021) Anti-corrosive hybrid electrolytes for rechargeable aqueous zinc batteries. Chem Res Chin Univ 37(2):328–33410.1007/s40242-021-1041-6 ↗
47. Liu ZY, Jia XX, Cao GZ (2021) Impacts of fluorine in NASICON-type materials as cathodes for aqueous zinc ion batteries. Energy Sci Eng 9(7):938–94910.1002/ese3.925 ↗
48. Zhou Y, Zhang ZS, Zhao Y et al (2021) Cost-effective, long-term aqueous rechargeable hybrid sodium/zinc batteries based on Zn anode and Na3MnTi(PO4)3 cathode. Chem Eng J 425:130459
49. Xu T, Zhao MS, Su Z et al (2021) Investigating architectured Na3V2(PO4)3/C/CNF hybrid cathode in aqueous zinc ion battery. Energy Fuels 35(19):16194–1620110.1021/acs.energyfuels.1c02586 ↗
50. Wang CL, Sun LS, Li MX et al (2022) Aqueous Zn2+/Na+ dual-salt batteries with stable discharge voltage and high columbic efficiency by systematic electrolyte regulation. Sci China Chem 65(2):399–40710.1007/s11426-021-1162-3 ↗
51. Wu ZY, Ye F, Liu Q et al (2022) Simultaneous incorporation of V and Mn element into polyanionic NASICON for high energy-density and long-lifespan Zn-ion storage. Adv Energy Mater 12(23):220065410.1002/aenm.202200654 ↗
52. Lei P, Zhuge SY, Lü Z (2022) Exploration of Na2.9V1.9Ti0.1(PO4)3@C as novel cathode material for aqueous zinc-ion batteries. Solid State Ionics 380:11594210.1016/j.ssi.2022.115942 ↗
53. Liu SY, Cao XX, Zhang YP et al (2020) Carbon quantum dot modified Na3V2(PO4)2F3 as a high-performance cathode material for sodium-ion batteries. J Mater Chem A 8(36):18872–1887910.1039/D0TA04307A ↗
54. Zeng LY, Li FK, Xu XJ et al (2020) A scalable approach to Na2FeP2O7@carbon/expanded graphite as a low-cost and high-performance cathode for sodium-ion batteries. ChemElectroChem 7(18):3874–388210.1002/celc.202001087 ↗
55. Zhao CD, Guo JZ, Gu ZY et al (2020) Robust three-dimensional carbon conductive network in a NaVPO4F cathode used for superior high-rate and ultralong-lifespan sodium-ion full batteries. J Mater Chem A 8(34):17454–1746210.1039/D0TA06614A ↗
56. Wang JM, Qin Q, Li FY et al (2022) Recent advances of MXenes Mo2C-based materials for efficient photocatalytic hydrogen evolution reaction. Carbon Lett. https://doi.org/10.1007/s42823-022-00401-210.1007/s42823-022-00401-2 ↗
57. Deng FX, Jiang JZ, Sirés I (2022) State-of-the-art review and bibliometric analysis on electro-Fenton process. Carbon Lett 33(1):17–3410.1007/s42823-022-00420-z ↗
58. Jiang JZ, Bai SS, Yang MQ et al (2022) Strategic design and fabrication of MXenes-Ti3CNCl2@CoS2 core-shell nanostructure for high-efficiency hydrogen evolution. Nano Res 15(7):5977–598610.1007/s12274-022-4276-8 ↗
59. Jiang JZ, Xiong ZG, Wang HT et al (2022) Sulfur-doped g-C3N4/g-C3N4 isotype step-scheme heterojunction for photocatalytic H2 evolution. J Mater Sci Technol 118:15–2410.1016/j.jmst.2021.12.018 ↗
60. Zou J, Wu SL, Liu Y et al (2018) An ultra-sensitive electrochemical sensor based on 2D g-C3N4/CuO nanocomposites for dopamine detection. Carbon 130:652–66310.1016/j.carbon.2018.01.008 ↗
61. Jiang JZ, Ou-yang L, Zhu LH et al (2014) Dependence of electronic structure of g-C3N4 on the layer number of its nanosheets: a study by Raman spectroscopy coupled with first-principles calculations. Carbon 80:213–22110.1016/j.carbon.2014.08.059 ↗
62. Bai SS, Yang MQ, Jiang JZ et al (2021) Recent advances of MXenes as electrocatalysts for hydrogen evolution reaction. npj 2D Mater Appl. https://doi.org/10.1038/s41699-021-00259-410.1038/s41699-021-00259-4 ↗
63. Anwar A, Chang T-P, Chen C-T (2021) Graphene oxide synthesis using a top–down approach and discrete characterization techniques: a holistic review. Carbon Lett 32(1):1–3810.1007/s42823-021-00272-z ↗
64. Hu C, Shi Q, Yang X et al (2021) Adsorption and sensing characteristics of air decomposed species onto pyridine-like PdN3-doped CNT: a first-principles study. Carbon Lett 32(1):109–11710.1007/s42823-021-00257-y ↗
65. Elahi Davaji H, Shamoradi F, Panjepour M et al (2021) Preparation and characterization of carbon felt/carbon composites by chemical vapor infiltration process. Carbon Lett 32(1):201–21510.1007/s42823-021-00267-w ↗
66. Yang M, Chen YY, Wang HT et al (2022) Solvothermal preparation of CeO2 nanoparticles–graphene nanocomposites as an electrochemical sensor for sensitive detecting pentachlorophenol. Carbon Lett 32(5):1277–128510.1007/s42823-022-00353-7 ↗
67. Wang Q, Zhang MY, Zhou CG et al (2018) Concerted ion-exchange mechanism for sodium diffusion and its promotion in Na3V2(PO4)3 framework. J Phys Chem C 122(29):16649–1665410.1021/acs.jpcc.8b06120 ↗
68. Wang YY, Wang YX, Kang WP et al (2019) TiO2-coated interlayer-expanded MoSe2/phosphorus-doped carbon nanospheres for ultrafast and ultralong cycling sodium storage. Adv Sci 6(1):180122210.1002/advs.201801222 ↗
69. Rajagopalan R, Zhang L, Dou SX et al (2016) Tuned in situ growth of nanolayered rGO on 3D Na3V2(PO4)3 matrices: a step toward long lasting, high power Na-ion batteries. Adv Mater Interfaces 3(13):160000710.1002/admi.201600007 ↗
70. Zhang JX, Fang YJ, Xiao LF et al (2017) Graphene-scaffolded Na3V2(PO4)3 microsphere cathode with high rate capability and cycling stability for sodium ion batteries. ACS Appl Mater Interfaces 9(8):7177–718410.1021/acsami.6b16000 ↗
71. Ruan YL, Wang K, Song SD et al (2016) Improved structural stability and electrochemical performance of Na3V2(PO4)3 cathode material by Cr doping. Ionics 23(5):1097–110510.1007/s11581-016-1919-3 ↗
72. Li H, Tang HM, Ma CZ et al (2018) Understanding the electrochemical mechanisms induced by gradient Mg2+ distribution of Na-rich Na3+xV2–xMgx(PO4)3/C for sodium ion batteries. Chem Mater 30(8):2498–250510.1021/acs.chemmater.7b03903 ↗
73. Huang YY, Li X, Wang JS et al (2018) Superior Na-ion storage achieved by Ti substitution in Na3V2(PO4)3. Energy Storage Mater 15:108–11510.1016/j.ensm.2018.03.021 ↗
74. Zhang B, Zeng T, Liu Y et al (2018) Effect of Ti-doping on the electrochemical performance of sodium vanadium(III) phosphate. RSC Adv 8(10):5523–553110.1039/C7RA12743J ↗
75. Niu YB, Zhang Y, Xu MW (2019) A review on pyrophosphate framework cathode materials for sodium-ion batteries. J Mater Chem A 7(25):15006–1502510.1039/C9TA04274A ↗
76. Liu XH, Feng GL, Wang EH et al (2019) Insight into preparation of Fe-doped Na3V2(PO4)3@C from aspects of particle morphology design, crystal structure modulation, and carbon graphitization regulation. ACS Appl Mater Interfaces 11(13):12421–1243010.1021/acsami.8b21257 ↗
77. Wang YY, Yang WH, Zhang XD et al (2019) High-performance multiphase Li2.5Na0.5V2(PO4)3 nanocomposite cathode enabled by hierarchical porous structure. J Alloys Compd 777:784–79410.1016/j.jallcom.2018.11.023 ↗
78. Zakharkin MV, Drozhzhin OA, Ryazantsev SV et al (2020) Electrochemical properties and evolution of the phase transformation behavior in the NASICON-type Na3+xMnxV2-x(PO4)3 (0≤x≤1) cathodes for Na-ion batteries. J Power Sources 470:22823110.1016/j.jpowsour.2020.228231 ↗
79. Cheng J, Chen YJ, Wang YZ et al (2020) Insights into the enhanced sodium storage property and kinetics based on the Zr/Si codoped Na3V2(PO4)3/C cathode with superior rate capability and long lifespan. J Power Sources 474:22863210.1016/j.jpowsour.2020.228632 ↗
80. Zhang JS, Lin CF, Xia QB et al (2021) Improved performance of Na3TiMn(PO4)3 using a non-stoichiometric synthesis strategy. ACS Energy Lett 6(6):2081–208910.1021/acsenergylett.1c00426 ↗
81. Kapoor V, Singh B, Sai Gautam G et al (2022) Rational design of mixed polyanion electrodes NaxV2P3–i(Si/S)iO12 for sodium batteries. Chem Mater 34(7):3373–338210.1021/acs.chemmater.2c00230 ↗
82. Wang K, Huang XB, Zhou T et al (2022) 3D porous spheroidal Na4Mn0.9Ce0.1V(PO4)3@CeO2/C cathode for high-energy Na ion batteries. J Mater Chem A 10(19):10625–1063710.1039/D2TA00955B ↗
83. Li JY, Zhao QY, Lin XT et al (2022) A dynamic polyanion framework with anion/cation co-doping for robust Na/Zn-ion batteries. J Power Sources 530:231257
84. Li FY, Anjarsari Y, Wang JM et al (2022) Modulation of the lattice structure of 2D carbon-based materials for improving photo/electric properties. Carbon Lett. https://doi.org/10.1007/s42823-022-00380-410.1007/s42823-022-00380-4 ↗
85. Song WX, Wu ZP, Chen J et al (2014) High-voltage NASICON sodium ion batteries: merits of fluorine insertion. Electrochim Acta 146:142–15010.1016/j.electacta.2014.09.068 ↗
86. Cahard D, Bizet V (2014) The influence of fluorine in asymmetric catalysis. Chem Soc Rev 43(1):135–14710.1039/C3CS60193E ↗
87. Li W, Wang KL, Cheng SJ et al (2018) A long-life aqueous Zn-ion battery based on Na3V2(PO4)2F3 cathode. Energy Storage Mater 15:14–2110.1016/j.ensm.2018.03.003 ↗
88. Park Y-U, Seo D-H, Kwon H-S et al (2013) A new high-energy cathode for a Na-ion battery with ultrahigh stability. J Am Chem Soc 135(37):13870–1387810.1021/ja406016j ↗
89. Li C, Shen M, Hu B et al (2018) High-energy nanostructured Na3V2(PO4)2O1.6F1.4 cathodes for sodium-ion batteries and a new insight into their redox chemistry. J Mater Chem A 6(18):8340–834810.1039/C8TA00568K ↗
90. Bui KM, Dinh VA, Okada S et al (2015) Hybrid functional study of the NASICON-type Na3V2(PO4)3: crystal and electronic structures, and polaron-Na vacancy complex diffusion. Phys Chem Chem Phys 17(45):30433–3043910.1039/C5CP05323D ↗
91. Sun X, Jin Y, Zhang CY et al (2014) Na[Ni0.4Fe0.2Mn0.4−xTix]O2: a cathode of high capacity and superior cyclability for Na-ion batteries. J Mater Chem A 2(41):17268–1727110.1039/C4TA03828B ↗
92. Yoshida H, Yabuuchi N, Kubota K et al (2014) P2-type Na2/3Ni1/3Mn2/3-xTixO2 as a new positive electrode for higher energy Na-ion batteries. Chem Commun 50(28):3677–368010.1039/C3CC49856E ↗
93. Wang HB, Zhang TR, Chen C et al (2017) High-performance aqueous symmetric sodium-ion battery using NASICON-structured Na2VTi(PO4)3. Nano Res 11(1):490–49810.1007/s12274-017-1657-5 ↗
94. Xu Z, Zhang Y, Gou WS et al (2022) The key role of concentrated Zn(OTF)2 electrolyte in the performance of aqueous Zn-S batteries. Chem Commun 58(58):8145–814810.1039/D2CC02075K ↗
95. Smith AJ, Burns JC, Dahn JR (2010) A high precision study of the coulombic efficiency of Li-ion batteries. Electrochem Solid-State Lett 13(12):A17710.1149/1.3487637 ↗
96. Sun YF, Zhang Y, Xu Z et al (2022) Dilute hybrid electrolyte for low-temperature aqueous sodium-ion batteries. Chemsuschem 15(23):e202201362
97. Xie XS, Liang SQ, Gao JW et al (2020) Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes. Energy Environ Sci 13(2):503–51010.1039/C9EE03545A ↗
98. Yuksel R, Buyukcakir O, Seong WK et al (2020) Metal-organic framework integrated anodes for aqueous zinc-ion batteries. Adv Energy Mater 10(16):190421510.1002/aenm.201904215 ↗
99. Wan F, Zhang Y, Zhang LL et al (2019) Reversible oxygen redox chemistry in aqueous zinc-ion batteries. Angew Chem Int Ed 58(21):7062–706710.1002/anie.201902679 ↗
100. Zhang N, Cheng FY, Liu YC et al (2016) Cation-deficient spinel ZnMn2O4 cathode in Zn(CF3SO3)2 electrolyte for rechargeable aqueous Zn-ion battery. J Am Chem Soc 138(39):12894–1290110.1021/jacs.6b05958 ↗