Factors affecting the electrical conductivity of conducting polymers
Source abstract
Abstract
Metals had been significantly substituted by synthetic polymers in most of our daily requirements, thus relaxing our life. Out of many applied areas, synthetic polymers especially conducting polymers had shown their marked effect and potential. Batteries, pseudocapacitors, superconductors, etc. are the potential zones where conducting polymers are chiefly employed owing to their appreciable conductivity, cost efficiency, and corrosion inhibition nature. Apart from energy storage devices, these conducting polymers find their potential application in biosensors, lasers, corrosion inhibitors, electrostatic materials, conducting adhesives, electromagnetic interference shielding, and others. These all applications including energy storage are due to astonishing properties like high conductivity, flexibility, tuneability, easy processibility, chemical, thermal and mechanical stability, easy and enhanced charge transportation, lightweight, etc. Conducting polymers are extensively studied for their application in energy storage batteries, for which the material under investigation needs to be electrically conductive. However, the conducting nature of these specific conducting polymers is dependent on numerous factors. This review discussed the effect of certain potential factors such as polymerization techniques temperature, doping, bandgap, extended conjugation, solvent, etc. on the electrical/electrochemical conductivity of these conducting polymers. These all factors with their specific variations are found to have a noticeable consequence on the electrical conductivity of the investigated conducting polymer and hence on the energy storage carried by them. This review could be proved beneficial to the readers, who can judiciously implement the conclusions to their research related to conducting polymers and their composites for generating highly efficient energy storage systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Shen Y, Xue H, Wang S, Wang Z, Zhang D, Yin D, Wang L, Cheng Y (2021) A highly promising high-nickel low-cobalt lithium layered oxide cathode material for high-performance lithium-ion batteries. J Colloid Interface Sci 597:334–344. https://doi.org/10.1016/j.jcis.2021.04.00810.1016/j.jcis.2021.04.008 ↗
2. Das TK, Prusty S (2012) Review on conducting polymers and their applications. Polym Plast Technol Eng 51(14):1487–1500. https://doi.org/10.1080/03602559.2012.71069710.1080/03602559.2012.710697 ↗
3. Kataria S, Mudila H, Kumar A, Prasher P (2022) Optical properties of novel materials for optoelectronic applications. Nanosci Nanotechnol-Asia. https://doi.org/10.2174/221068121366622103110315710.2174/2210681213666221031103157 ↗
4. Magu TO, Agobi AU, Hitler L, Dass PM (2019) A review on conducting polymers-based composites for energy storage application. J Chem Rev 1(1):19–34. https://doi.org/10.33945/SAMI/JCR.2019.1.193410.33945/SAMI/JCR.2019.1.1934 ↗
5. Saal A, Hagemann T, Schubert US (2020) Polymers for battery applications—active materials, membranes, and binders. Adv Energy Mater 2001984:1–40. https://doi.org/10.1002/aenm.20200198410.1002/aenm.202001984 ↗
6. Le TH, Kim Y, Yoon H (2017) Electrical and electrochemical properties of conducting polymers. Polymers 9(12):150. https://doi.org/10.3390/polym904015010.3390/polym9040150 ↗
7. Ramya R, Sivasubramanian R, Sangaranarayanan MV (2013) Conducting polymer-based electrochemical supercapacitors—progress and prospects. Electrochim Acta 101:109–129. https://doi.org/10.1016/j.electacta.2012.09.11610.1016/j.electacta.2012.09.116 ↗
8. Mudila H, Joshi V, Rana S, Zaidi MGH, Sarfaraz A (2014) Enhanced electrocapacitive performance and high-power density of polypyrrole/graphene oxide nanocomposites prepared at reduced temperature. Carbon Lett 15(3):171–179. https://doi.org/10.5714/CL.2014.15.3.17110.5714/CL.2014.15.3.171 ↗
9. Seo J, Lee SY, Bielawski CW (2019) Unveiling a masked polymer of dewar benzene reveals trans-poly(acetylene). Macromolecules 52(8):2923–2931. https://doi.org/10.1021/acs.macromol.8b0275410.1021/acs.macromol.8b02754 ↗
10. Hong X, Liu Y, Li Y, Wang X, Fu J, Wang X (2020) Application progress of polyaniline, polypyrrole and polythiophene in lithium-sulfur batteries. Polymers 12(2):331. https://doi.org/10.3390/polym1202033110.3390/polym12020331 ↗
11. Mudila H, Prasher P, Kumar M, Kumar A, Zaidi MGH, Kumar A (2019) Critical analysis of polyindole and its composites in supercapacitor application. Mater Renew Sustain Energy 8(9):2851. https://doi.org/10.1007/s40243-019-0149-910.1007/s40243-019-0149-9 ↗
12. Shahabuddin S, Mazlan NA, Baharin SNA, Sambasevam KP (2021) Introduction to conducting polymers. In: Shahabuddin S, Pandey AK, Khalid M, Jagadish P (eds) Advances in hybrid conducting polymer technology. Engineering materials. Springer, Cham, pp 1–1810.1007/978-3-030-62090-5 ↗
13. Nellaiappan S, Shalini Devi KS, Selvaraj S, Krishnan UM, Yakhmi JV (2021) Chemical, gas and optical sensors based on conducting polymers. In: Shahabuddin S, Pandey AK, Khalid M, Jagadish P (eds) Advances in hybrid conducting polymer technology. Engineering materials. Springer, Cham, pp 159–20010.1007/978-3-030-62090-5_8 ↗
14. Martins VL, Obana TT, Torresi RM (2020) Electroactivity of 3D conducting polymers in water-in-salt electrolyte and their electrochemical capacitor performance. J Electroanal Chem 114822:1–28. https://doi.org/10.1016/j.jelechem.2020.11482210.1016/j.jelechem.2020.114822 ↗
15. Kumar A, Kumar A, Mudila H, Awasthi K, Kumar V (2020) Synthesis and thermal analysis of polyaniline (PANI). J Phys Conf Ser 1531:1–6. https://doi.org/10.1088/1742-6596/1531/1/01210810.1088/1742-6596/1531/1/012108 ↗
16. Ramanavicius S, Ramanavicius A (2021) Conducting polymers in the design of biosensors and biofuel cells. Polymers 13(1):49. https://doi.org/10.3390/polym1301004910.3390/polym13010049 ↗
17. Khokhar D, Jadoun S, Arif R, Jabin S (2020) Functionalization of conducting polymers and their applications in optoelectronics. Polym Plast Tech Mat 60(5):463–485. https://doi.org/10.1080/25740881.2020.181931210.1080/25740881.2020.1819312 ↗
18. Adeosun WA, Katowah DF, Asiri AM, Hussein MA (2020) Conducting terpolymers and its hybrid nanocomposites variable trends. From synthesis to applications. A review. Polym Plast Tech Mat 60(3):271–285. https://doi.org/10.1080/25740881.2020.181131610.1080/25740881.2020.1811316 ↗
19. Guo B, Glavas L, Albertsson AC (2013) Biodegradable and electrically conducting polymers for biomedical applications. Prog Polym Sci 38(9):1263–1286. https://doi.org/10.1016/j.progpolymsci.2013.06.00310.1016/j.progpolymsci.2013.06.003 ↗
20. Hoffman AS (2013) Stimuli-responsive polymers: biomedical applications and challenges for clinical translation. Adv Drug Deliv Rev 65(1):10–16. https://doi.org/10.1016/j.addr.2012.11.00410.1016/j.addr.2012.11.004 ↗
21. Grivas C, Pollnau M (2012) Organic solid-state integrated amplifiers and lasers. Laser Photon Rev 6(4):419–462. https://doi.org/10.1002/lpor.20110003410.1002/lpor.201100034 ↗
22. Vangari M, Pryor T, Jiang L (2013) Supercapacitors: review of materials and fabrication methods. J Energy Eng 139(2):72–79. https://doi.org/10.1061/(ASCE)EY.1943-7897.000010210.1061/(ASCE)EY.1943-7897.0000102 ↗
23. Mudila H, Rana S, Zaidi MGH, Alam S (2014) Polyindole/graphene oxide nanocomposites: the novel material for electrochemical energy storage. Fuller, Nanotub Carbon Nanostruct 23(1):20–26. https://doi.org/10.1080/1536383x.2013.78760410.1080/1536383x.2013.787604 ↗
24. Knopfmacher O, Hammock ML, Appleton AL, Schwartz G, Mei J, Lei T, Pei J, Bao Z (2014) Highly stable organic polymer field-effect transistor sensor for selective detection in the marine environment. Nat Commun 5(1):1–9. https://doi.org/10.1038/ncomms395410.1038/ncomms3954 ↗
25. Zhou H, Wang Z, Zhao W, Tong X, Jin X, Zhang X, Yu Y, Liu H, Ma Y, Li S, Chen W (2020) Robust and sensitive pressure/strain sensors from solution processable composite hydrogels enhanced by hollow-structured conducting polymers. Chem Eng J 403:1–9. https://doi.org/10.1016/j.cej.2020.12630710.1016/j.cej.2020.126307 ↗
26. Tajik S, Beitollahi H, Nejad FG, Shoaie IS, Khalilzadeh MA, Asl MS, Van Le Q, Zhang K, Jang HW, Shokouhimehr M (2020) Recent developments in conducting polymers: applications for electrochemistry. RSC Adv 10(62):37834–37856. https://doi.org/10.1039/D0RA06160C10.1039/D0RA06160C ↗
27. Srilalitha S, Jayaveera KN, Madhvendhra SS (2013) The effect of dopant, temperature, and bandgap on conductivity of conducting polymers. Int J Innov Res Sci Eng Technol 2(7):2694–2696
28. Namsheer K, Rout CS (2021) Conducting polymers: a comprehensive review on recent advances in synthesis, properties, and applications. RSC Adv 11:5659–5697. https://doi.org/10.1039/D0RA07800J10.1039/D0RA07800J ↗
29. Abu-Thabit NY (2016) Chemical oxidative polymerization of polyaniline: a practical approach for preparation of smart conductive textiles. J Chem Educ 93(9):1606–1611. https://doi.org/10.1021/acs.jchemed.6b0006010.1021/acs.jchemed.6b00060 ↗
30. Sapurina IY, Shishov MA (2012) Oxidative polymerization of aniline: molecular synthesis of polyaniline and the formation of supramolecular structures. New Polym Spec Appl. https://doi.org/10.5772/4875810.5772/48758 ↗
31. Mart H (2006) Oxidative polycondensation reaction. Des Monomers Polym 9(6):551–588. https://doi.org/10.1163/15685550677894405510.1163/156855506778944055 ↗
32. Kang H, Geckeler K (2000) Enhanced electrical conductivity of polypyrrole prepared by chemical oxidative polymerization: effect of the preparation technique and polymer additive. Polymer 41(18):6931–6934. https://doi.org/10.1016/s0032-3861(00)00116-610.1016/s0032-3861(00)00116-6 ↗
33. Lee JY, Kim DY, Kim CY (1995) Synthesis of soluble polypyrrole of the doped state in organic solvents. Synth Met 74(2):103–106. https://doi.org/10.1016/0379-6779(95)03359-910.1016/0379-6779(95)03359-9 ↗
34. Shen Y, Wan M (1998) In situ doping polymerization of pyrrole with sulfonic acid as a dopant. Synth Met 96(2):127–132. https://doi.org/10.1016/s0379-6779(98)00076-910.1016/s0379-6779(98)00076-9 ↗
35. Thanasamy D, Jesuraj D, Kannan SKK, Avadhanam V (2019) A novel route to synthesis of polythiophene with great yield and high electrical conductivity without post doping process. Polymer 175(26):32–40. https://doi.org/10.1016/j.polymer.2019.03.04210.1016/j.polymer.2019.03.042 ↗
36. Wadatkar NS, Waghuley SA (2016) Studies on properties of as-synthesized conducting polythiophene through aqueous chemical route. J Mat Sci Mater Electron 27(10):10573–10581. https://doi.org/10.1007/s10854-016-5152-710.1007/s10854-016-5152-7 ↗
37. David T, Dominic J, Kumar KKS, Vanaja A (2019) A novel route to synthesis of polythiophene with great yield and high electrical conductivity without post doping process. Polymer 175:32–40. https://doi.org/10.1016/j.polymer.2019.03.04210.1016/j.polymer.2019.03.042 ↗
38. Radja I, Djelad H, Morallon E, Benyoucef A (2015) Characterization and electrochemical properties of conducting nanocomposites synthesized from p-anisidine and aniline with titanium carbide by the chemical oxidative method. Synth Met 202:25–32. https://doi.org/10.1016/j.synthmet.2015.01.02810.1016/j.synthmet.2015.01.028 ↗
39. Anguera G, García DS (2014) Conjugated polymers: synthesis and applications in optoelectronics. Afinidad. J Chem Eng Theor Appl Chem 71(568):251–262
40. Lawal AT, Wallace GG (2014) Vapor phase polymerization of conducting and non-conducting polymers: a review. Talanta 119:133–143. https://doi.org/10.1016/j.talanta.2013.10.02310.1016/j.talanta.2013.10.023 ↗
41. Ren X, Shi C, Zhang P, Jiang Y, Liu J, Zhang Q (2012) An investigation of V2O5/polypyrrole composite cathode materials for lithium-ion batteries synthesized by sol-gel. Mater Sci Eng: B 177(12):929–934. https://doi.org/10.1016/j.mseb.2012.04.01310.1016/j.mseb.2012.04.013 ↗
42. Li J, He Y, Sun Y, Zhang X, Shi W, Ge D (2020) Synthesis of polypyrrole/V2O5 composite film on the surface of magnesium using a mild vapor phase polymerization (vpp) method for corrosion resistance. Coat 10(4):402(1–11). https://doi.org/10.3390/coatings1004040210.3390/coatings10040402 ↗
43. Jun T-S, Kim C-K, Kim YS (2014) Vapor phase polymerization of polyaniline nanotubes using Mn3O4 nanofibers as an oxidant. Mater Lett 133:17–19. https://doi.org/10.1016/j.matlet.2014.06.15410.1016/j.matlet.2014.06.154 ↗
44. Yang Y, Zhang L, Li S, Wang Z, Xu J, Yang W, Jiang Y (2013) Vapor phase polymerization deposition conducting polymer nanocomposites on porous dielectric surface as high-performance electrode materials. Nano-Micro Lett 5(1):40–46. https://doi.org/10.1007/bf0335373010.1007/bf03353730 ↗
45. So JH, Mayevsky D, Winther-Jensen O, Winther-Jensen B (2014) A novel route for polymerization of thiophene based conducting polymers using trace-free oxidants. Polym Chem 5(2):361–364. https://doi.org/10.1039/c3py01265d10.1039/c3py01265d ↗
46. Asatekin A, Barr MC, Baxamusa SH, Lau KKS, Tenhaeff W, Xu J, Gleason KK (2010) Designing polymer surfaces via vapor deposition. Mater Today Commun 13(5):26–33. https://doi.org/10.1016/s1369-7021(10)70081-x10.1016/s1369-7021(10)70081-x ↗
47. Heydarnezhad HR, Pourabbas B, Sharif M (2013) Different methods for photochemical synthesis of conducting polymers and their applications. Iran J Chem Eng 12(69):36–59
48. Kumar R, Singh S, Yadav BC (2015) Conducting polymers: synthesis, properties, and applications. Int Adv Res J Sci Eng Technol 2(11):110–124. https://doi.org/10.17148/IARJSET.2015.2112311010.17148/IARJSET.2015.21123110 ↗
49. Heydarnezhad HR, Pourabbas B (2013) One-step synthesis of conductive ceria/polypyrrole nanocomposite particles via photo-induced polymerization method. J Mater Sci Mater Electron 24(11):4378–4385. https://doi.org/10.1007/s10854-013-1413-x10.1007/s10854-013-1413-x ↗
50. Rather MS, Majid K, Wanchoo RK, Singla ML (2013) The nanocomposite of Polyaniline with the photoadduct of potassium hexacyanoferrate and pyridine ligand: structural, electrical, mechanical and thermal study. Synth Met 179:60–66. https://doi.org/10.1016/j.synthmet.2013.07.01010.1016/j.synthmet.2013.07.010 ↗
51. Fomo G, Waryo T, Feleni U, Baker P, Iwuoha E (2019) Electrochemical polymerization. In: Jafar Mazumder M, Sheardown H, Al-Ahmed A (eds) Functional polymers polymers and polymeric composites: a reference series. Springer, Cham, pp 105–131
52. Coelho MKL, Giarola JDF, Da Silva ATM, Tarley CRT, Borges KB, Pereira AC (2016) Development and application of electrochemical sensor based on molecularly imprinted polymer and carbon nanotubes for the determination of carvedilol. Chemosensors 4(4):1–15. https://doi.org/10.3390/chemosensors404002210.3390/chemosensors4040022 ↗
53. Bhadra S, Singha NK, Khastgir D (2007) Electrochemical synthesis of polyaniline and its comparison with chemically synthesized polyaniline. J Appl Polym Sci 104(3):1900–1904. https://doi.org/10.1002/app.2586710.1002/app.25867 ↗
54. Nunoo OA, Awuah JA, Abavare EKK, Singh K (2019) Effect of primary dopants on the conductivity of polyaniline synthesized by electrochemical polymerization. Int J Adv Res Eng Technol 10(6):157–163. https://doi.org/10.34218/IJARET.10.6.2019.01910.34218/IJARET.10.6.2019.019 ↗
55. Rahaman M, Aldalbahi A, Almoiqli M, Alzahly S (2018) Chemical and electrochemical synthesis of polypyrrole using carrageenan as a dopant: polypyrrole/multi-walled carbon nanotube nanocomposites. Polymers 10(6):632(1–20). https://doi.org/10.3390/polym1006063210.3390/polym10060632 ↗
56. Jérôme C, Labaye D, Bodart I, Jérôme R (1999) Electrosynthesis of polyacrylic/polypyrrole composites: formation of polypyrrole wires. Synth Met 101:3–4. https://doi.org/10.1016/s0379-6779(98)00524-410.1016/s0379-6779(98)00524-4 ↗
57. Trivedi DC (1999) Influence of counter ion on polyaniline and polypyrrole. Indian Acad Sci 22(3):447–455
58. Turac E, Varol R, Ak M, Sahmetlioglu E, Toppare L (2008) Electrochemical synthesis of a water-soluble and self-doped polythiophene derivative. Des Monomers Polym 11(4):309–317. https://doi.org/10.1163/156855508x33246910.1163/156855508x332469 ↗
59. Campbell SA, Li Y, Breakspear S, Walsh FC, Smith JR (2007) Conducting polymer coatings in electrochemical technology part 1 – synthesis and fundamental aspects. Int J Surf Eng Coat 85(5):237–244. https://doi.org/10.1179/174591907x22967110.1179/174591907x229671 ↗
60. Kitto T, Bodart-Le Guen C, Rossetti N, Cicoira F (2019) Processing and patterning of conducting polymers for flexible, stretchable, and biomedical electronics. In: Ostroverkhova O (ed) Handbook of organic materials for electronic and photonic devices, 2nd edn. Woodhead Publishing, pp 817–84210.1016/B978-0-08-102284-9.00025-5 ↗
61. Chiang CK, Park YW, Heeger AJ, Shirakawa H, Louis EJ, MacDiarmid AG (1978) Conducting polymers: halogen doped polyacetylene. J Chem Phys 69(11):5098–5104. https://doi.org/10.1063/1.43650310.1063/1.436503 ↗
62. Roth RS, Carroll D (2004) One-dimensional metals: conjugated polymers, organic crystals, carbon nanotubes. Wiley-VCH, Weinheim, Germany, pp 200–30010.1002/3527602321 ↗
63. Ansari SP, Mohammad F (2015) Electrical conductivity studies of conducting polymer nanocomposites in ambient conditions. Polym Polym Compos 24(4):273–280. https://doi.org/10.1177/09673911160240040610.1177/096739111602400406 ↗
64. Rathod SG, Bhajantri RF, Ravindrachary V, Pujari PK, Nagaraja GK, Naik J, Hebbar V, Chandrappa H (2015) Temperature-dependent ionic conductivity and transport properties of LiClO4-doped PVA/modified cellulose composites. Bull Mater Sci 38(5):1213–1221. https://doi.org/10.1007/s12034-015-1002-010.1007/s12034-015-1002-0 ↗
65. Bakhshi AK (1995) Electrically conducting polymers: from fundamental to applied research. Bull Mater Sci 18(5):469–49510.1007/BF02744834 ↗
66. Yamada K, Shinozaki B, Narikiyo T, Takigawa Y, Kuroda N, Bando T, Nakamura H (2019) Temperature dependence of the mobility of conducting polymer polyaniline with a secondary dopant. Synth Met 247:124–130. https://doi.org/10.1016/j.synthmet.2018.11.01910.1016/j.synthmet.2018.11.019 ↗
67. Amorim DRB, Guimarães IDS, Fugikawa-Santos L, Vega ML, da Cunha HN (2020) Effect of temperature on the electrical conductivity of polyaniline/cashew gum blends. Mater Chem Phys 253:123383. https://doi.org/10.1016/j.matchemphys.2020.12338310.1016/j.matchemphys.2020.123383 ↗
68. Kassim A, Basar ZB, Mahmud HNME (2002) Effects of preparation temperature on the conductivity of polypyrrole conducting polymer. J Chem Sci 114(2):155–162. https://doi.org/10.1007/bf0270430810.1007/bf02704308 ↗
69. Karbownik I, Rac-Rumijowska O, Rybicki T, Suchorska-Wozniak P, Teterycz H (2021) The effect of temperature on electric conductivity of polyacrylonitrile-polyaniline fibers. IEEE Access 9:74017–74027. https://doi.org/10.1109/ACCESS.2021.307883510.1109/ACCESS.2021.3078835 ↗
70. Nogami Y, Kaneko H, Ito H, Ishiguro T, Sasaki T, Toyota NA, Takahashi A, Tsukamoto J (1991) Low-temperature electrical conductivity of highly conducting polyacetylene in a magnetic field. Phys Rev B 43(14):11829–11839. https://doi.org/10.1103/physrevb.43.1182910.1103/physrevb.43.11829 ↗
71. Su N (2015) Improving electrical conductivity, thermal stability, and solubility of polyaniline-polypyrrole nanocomposite by doping with anionic spherical polyelectrolyte brushes. Nanoscale Res Lett 10(1):301–309. https://doi.org/10.1186/s11671-015-0997-x10.1186/s11671-015-0997-x ↗
72. Susilawat S (2018) The effect of temperature on the conductivity of polymer films. JPPIPA 4(2):43–50. https://doi.org/10.29303/jppipa.v4i2.12210.29303/jppipa.v4i2.122 ↗
73. Khokhar D, Jadoun S, Arif R, Jabin S (2021) Functionalization of conducting polymers and their applications in optoelectronics. Polym Plast Technol Mat 60(5):463–485. https://doi.org/10.1080/25740881.2020.181931210.1080/25740881.2020.1819312 ↗
74. Bryan AM, Santino LM, Lu Y, Acharya S, D’Arcy JM (2016) Conducting polymers for pseudocapacitive energy storage. Chem Mater 28(17):5989–5998. https://doi.org/10.1021/acs.chemmater.6b0176210.1021/acs.chemmater.6b01762 ↗
75. Wang PC, Yu JY (2012) Dopant-dependent variation in the distribution of polarons and bipolarons as charge carriers in polypyrrole thin films synthesized by oxidative chemical polymerization. React Funct Polym 72(5):311–316. https://doi.org/10.1016/j.reactfunctpolym.2012.03.00510.1016/j.reactfunctpolym.2012.03.005 ↗
76. Jabarullah NH, Verrelli E, Gee A, Mauldin C, Navarro LA, Golden JH, Kemp NT (2016) Large dopant dependence of the current limiting properties of intrinsic conducting polymer surge protection devices. RSC Adv 6(89):85710–85717. https://doi.org/10.1039/C6RA18549E10.1039/C6RA18549E ↗
77. Liang Z, Zhang Y, Souri M, Luo X, Boehm AM, Li R, Zhang Y, Wang T, Kim D-Y, Mei J, Marder SR, Graham KR (2018) Influence of dopant size and electron affinity on the electrical conductivity and thermoelectric properties of a series of conjugated polymers. J Mater Chem A 6(34):16495–16505. https://doi.org/10.1039/C8TA05922E10.1039/C8TA05922E ↗
78. Green RA, Lovell NH, Poole-Warren LA (2010) Impact of co-incorporating laminin peptide dopants and neurotrophic growth factors on conducting polymer properties. Act Biomater 6(1):63–71. https://doi.org/10.1016/j.actbio.2009.06.03010.1016/j.actbio.2009.06.030 ↗
79. Koopmans M, Leiviskä MAT, Liu J, Dong J, Qiu L, Hummelen JC, Portale G, Heiber MC, Koster LJA (2020) Electrical conductivity of doped organic semiconductors limited by carrier-carrier interactions. ACS Appl Mater Interfaces 12(50):56222–56230. https://doi.org/10.1021/acsami.0c1549010.1021/acsami.0c15490 ↗
80. Khalid M, Honorato AMB, Varela H (2018) Polyaniline: synthesis methods, doping, and conduction mechanism. Intechopen. https://doi.org/10.5772/intechopen.7908910.5772/intechopen.79089 ↗
81. Arkhipov VI, Emelianova EV, Heremans P, Bassler H (2005) Analytic model of carrier mobility in doped disordered organic semiconductors. Phys Rev B 72(23):1–5. https://doi.org/10.1103/physrevb.72.23520210.1103/physrevb.72.235202 ↗
82. Liu F, van Eersel H, Xu B, Wilbers JGE, de Jong MP, van der Wiel WG, Bobbert PA, Coehoorn R (2017) Effect of Coulomb correlation on charge transport in disordered organic semiconductors. Phys Rev B 96(20):1–8. https://doi.org/10.1103/physrevb.96.20520310.1103/physrevb.96.205203 ↗
83. Ravichandran R, Sundarrajan S, Venugopal JR, Mukherjee S, Ramakrishna S (2010) Applications of conducting polymers and their issues in biomedical engineering. J R Soc Interface 7(5):559–579. https://doi.org/10.1098/rsif.2010.0120.focus10.1098/rsif.2010.0120.focus ↗
84. Li H, DeCoster ME, Ming C, Wang M, Chen Y, Hopkins PE, Chen L, Katz HE (2019) Enhanced molecular doping for high conductivity in polymers with volume freed for dopants. Macromolecules 52(24):9804–9812. https://doi.org/10.1021/acs.macromol.9b0204810.1021/acs.macromol.9b02048 ↗
85. Nagarkar SS, Horike S, Itakura T, Le Ouay B, Demessence A, Tsujimoto M, Kitagawa S (2017) Enhanced and optically switchable proton conductivity in a melting coordination polymer crystal. Angew Chem 56(18):4976–4981. https://doi.org/10.1002/anie.20170096210.1002/anie.201700962 ↗
86. Navarchian AH, Hasanzadeh Z, Joulazadeh M (2013) Effect of polymerization conditions on reaction yield, conductivity, and ammonia sensing of polyaniline. Adv Polym Technol 32(3):1–10. https://doi.org/10.1002/adv.2135610.1002/adv.21356 ↗
87. Wang J, Xu Y, Chen X, Du X, Li X (2007) Effect of doping ions on electrochemical capacitance properties of polypyrrole films. Acta Phys Chim Sin 23(3):299–304. https://doi.org/10.1016/s1872-1508(07)60023-010.1016/s1872-1508(07)60023-0 ↗
88. Sinha S, Bhadra S, Khastgir D (2009) Effect of dopant type on the properties of polyaniline. J Appl Polym Sci 112(5):3135–3140. https://doi.org/10.1002/app.2970810.1002/app.29708 ↗
89. Phasuksom K, Sirivat A (2016) Synthesis of nano-sized polyindole via emulsion polymerization and doping. Synth Met 219:142–153. https://doi.org/10.1016/j.synthmet.2016.05.03310.1016/j.synthmet.2016.05.033 ↗
90. Phasuksom K, Prissanaroon-Ouajai W, Sirivat A (2018) Electrical conductivity response of methanol sensor based on conductive polyindole. Sens Actuators B: Chem 262:1013–1023. https://doi.org/10.1016/j.snb.2018.02.08810.1016/j.snb.2018.02.088 ↗
91. Glaudell AM, Cochran JE, Patel SN, Chabinyc ML (2014) Impact of the doping method on conductivity and thermopower in semiconducting polythiophenes. Adv Energy Mater 5(4):1401072(1–8). https://doi.org/10.1002/aenm.20140107210.1002/aenm.201401072 ↗
92. Zhao D, Li L, Niu W, Chen S (2017) Highly conductive polythiophene films doped with chloroauric acid for dual-mode sensing of volatile organic amines and thiols. Sens Actuators B: Chem 243:380–387. https://doi.org/10.1016/j.snb.2016.12.01810.1016/j.snb.2016.12.018 ↗
93. Sakunpongpitiporn P, Phasuksom K, Sirivat A (2021) Tuning of PEDOT : PSS synthesis via multiple doping for enhanced electrical conductivity. Polym Int 70(10):1534–1543. https://doi.org/10.1002/pi.623410.1002/pi.6234 ↗
94. Ismail AM, El-Newehy MH, El-Naggar ME, Meera Moydeen A, Menazea AA (2020) Enhancement of the electrical conductivity of the synthesized polyvinylidene fluoride/polyvinyl chloride composite doped with palladium nanoparticles via laser ablation. J Mater Res Technol 9(5):11178–11188. https://doi.org/10.1016/j.jmrt.2020.08.01310.1016/j.jmrt.2020.08.013 ↗
95. An JY, Lee HS, Kim J, Ryu SW, Park BC, Kahng YH (2021) Doping of graphene with polyethylenimine and its effects on graphene-based supercapacitors. J Appl Phys 129(9):094904. https://doi.org/10.1063/5.003589110.1063/5.0035891 ↗
96. Scharber MC, Sariciftci NS (2021) Low bandgap conjugated semiconducting polymers. Adv Mater Technol 6(4):2000857. https://doi.org/10.1002/admt.20200085710.1002/admt.202000857 ↗
97. Shen Y, Yao X, Wang S, Zhang D, Yin D, Wang L, Cheng Y (2021) Gospel for improving the lithium storage performance of high-voltage high-nickel low-cobalt layered oxide cathode materials. ACS Appl Mater Interfaces 13(49):58871–58884. https://doi.org/10.1021/acsami.1c2056810.1021/acsami.1c20568 ↗
98. Cheng Y, Sun Y, Chu C, Chang L, Wang Z, Zhang D, Liu W, Zhuang Z, Wang L (2022) Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries. Nano Res 15:4091–409910.1007/s12274-021-4035-2 ↗
99. Bouzzine SM, Salgado-Morán G, Hamidi M, Bouachrine M, Pacheco AG, Glossman-Mitnik D (2015) DFT study of polythiophene energy bandgap and substitution effects. J Chem 2015:1–12. https://doi.org/10.1155/2015/29638610.1155/2015/296386 ↗
100. Roncali J (2007) Molecular engineering of the bandgap of π-conjugated systems: facing technological applications. Macromol Rapid Commun 28(17):1761–1775. https://doi.org/10.1002/marc.20070034510.1002/marc.200700345 ↗