Carbon substrates: a review on fabrication, properties and applications
Source abstract
Abstract
Carbon lives along with us in our daily life and has a vital role to play. It is present in the air and within all living organisms. Due to its handheld advantage in nano-properties that are utilized in many applications, carbon substrates came under limelight during the recent decades. Carbon substrates are most widely used in cancer detection, catalysis, bio-sensing, adsorption, drug delivery, carbon capture, hydrogen storage, and energy. Alongside, composite materials with carbon as an additive are also developing rapidly in applications like infrastructures, automobile, health care, consumer goods, etc. which became an integral chunk of our life. In this paper different types of carbon substrates and its applications, properties of the substrates were reviewed. The applications and methods of synthesis of carbon substrates are also dealt with a broad perspective.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Graphene research and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Chu H, Zhang Z, Liu Y, Leng J (2014) Self-heating fiber reinforced polymer composite using meso/macropore carbon nanotube paper and its application in deicing. Carbon 66:154–16310.1016/j.carbon.2013.08.053 ↗
2. Anzar N, Hasan R, Tyagi M, Yadav N, Narang J (2020) Carbon nanotube—a review on synthesis, properties and plethora of applications in the field of biomedical science. Sensors Int 1:10000310.1016/j.sintl.2020.100003 ↗
3. Li J, Lu W, Suhr J, Chen H, Xiao JQ, Chou TW (2017) Superb electromagnetic wave-absorbing composites based on large-scale graphene and carbon nanotube films. Sci Rep 7(1):234910.1038/s41598-017-02639-7 ↗
4. Saravana Kumar A, Maivizhi Selvi P, Rajeshkumar L (2017) Delamination in drilling of sisal/banana reinforced composites produced by hand lay-up process. Appl Mech Mater 867:29–3310.4028/www.scientific.net/AMM.867.29 ↗
5. Yunlong Li, Wang Q, Wang S (2019) A review on enhancement of mechanical and tribological properties of polymer composites reinforced by carbon nanotubes and graphene sheet: molecular dynamics simulations. Compos B Eng 160:348–36110.1016/j.compositesb.2018.12.026 ↗
6. Yunlong Li, Wang S, Wang Q, Xing M (2018) A comparison study on mechanical properties of polymer composites reinforced by carbon nanotubes and graphene sheet. Compos B Eng 133:35–4110.1016/j.compositesb.2017.09.024 ↗
7. Nasouri K, Shoushtari AM (2017) Designing, modeling and manufacturing of lightweight carbon nanotubes/polymer composite nanofibers for electromagnetic interference shielding application. Compos Sci Technol 145:46–5410.1016/j.compscitech.2017.03.041 ↗
8. Zhu H, Wang X, Liang J, HonglingLv HT, Ma L, Yi Hu et al (2017) Versatile electronic skins for motion detection of joints enabled by aligned few-walled carbon nanotubes in flexible polymer composites. Adv Func Mater 27(21):160660410.1002/adfm.201606604 ↗
9. El Moumen A, Tarfaoui M, Lafdi K (2017) Mechanical characterization of carbon nanotubes based polymer composites using indentation tests. Compos B Eng 114:1–710.1016/j.compositesb.2017.02.005 ↗
10. Sweeney CB, Blake AL, Martin JP, Thomas CA, Victoria KH, Aaron GM, Blake RT, Mohammad AS, Micah JG (2017) Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating. Sci Adv 3(6):170026210.1126/sciadv.1700262 ↗
11. Tarfaoui M, El Moumen A, Lafdi K (2017) Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites. Compos B Eng 112:185–19510.1016/j.compositesb.2016.12.056 ↗
12. Zhang L-Q, Yang B, Teng J, Lei J, Yan D-X, Zhong G-J, Li Z-M (2017) Tunable electromagnetic interference shielding effectiveness via multilayer assembly of regenerated cellulose as a supporting substrate and carbon nanotubes/polymer as a functional layer. J Mater Chem C 5(12):3130–313810.1039/C6TC05516H ↗
13. Ramesh M (2016) Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: a review on processing and properties. Prog Mater Sci 78–79:1–9210.1016/j.pmatsci.2015.11.001 ↗
14. Zhang L, De Greef N, Kalinka G, Van Bilzen B, Locquet J-P, IgnaasSeo VJW (2017) Carbon nanotube-grafted carbon fiber polymer composites: damage characterization on the micro-scale. Compos B Eng 126:202–21010.1016/j.compositesb.2017.06.004 ↗
15. Chaudhry MS, Czekanski A, Zhu ZH (2017) Characterization of carbon nanotube enhanced interlaminar fracture toughness of woven carbon fiber reinforced polymer composites. Int J Mech Sci 131:480–48910.1016/j.ijmecsci.2017.06.016 ↗
16. Chen J, Cui X, Zhu Y, Jiang W, Sui K (2017) Design of superior conductive polymer composite with precisely controlling carbon nanotubes at the interface of a co-continuous polymer blend via a balance of π-π interactions and dipole-dipole interactions. Carbon 114:441–44810.1016/j.carbon.2016.12.048 ↗
17. Lebedev SM, Gefle OS, Amitov ET, Yu Berchuk D, Zhuravlev DV (2017) Poly (lactic acid)-based polymer composites with high electric and thermal conductivity and their characterization. Polym Testing 58:241–24810.1016/j.polymertesting.2016.12.033 ↗
18. Cha J, Seongwoo JK, R, Soon HH, (2019) Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets. Compos Part B Eng 162:283–28810.1016/j.compositesb.2018.11.011 ↗
19. Che J, Kai Wu, Lin Y, Wang Ke, Qiang Fu (2017) Largely improved thermal conductivity of HDPE/expanded graphite/carbon nanotubes ternary composites via filler network-network synergy. Compos A Appl Sci Manuf 99:32–4010.1016/j.compositesa.2017.04.001 ↗
20. Mora A, Han F, Lubineau G (2018) Estimating and understanding the efficiency of nanoparticles in enhancing the conductivity of carbon nanotube/polymer composites. Results Phys 10:81–9010.1016/j.rinp.2018.05.019 ↗
21. Zhou B, Luo W, Yang J, XianbaoDuan YW, Zhou H, Chen R, Shan B (2017) Simulation of dispersion and alignment of carbon nanotubes in polymer flow using dissipative particle dynamics. Comput Mater Sci 126:35–4210.1016/j.commatsci.2016.09.012 ↗
22. El Moumen A, Tarfaoui M, Lafdi K, Benyahia H (2017) Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low-velocity impact. Compos Part B Eng 125:1–810.1016/j.compositesb.2017.05.065 ↗
23. Sankaran S, Kalim Deshmukh M, Basheer Ahamed SK, Pasha K (2018) Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: a review. Compos A Appl Sci Manuf 114:49–7110.1016/j.compositesa.2018.08.006 ↗
24. Zhang H, Zhang G, Tang M, Zhou L, Li J, Fan X, Shi X, Qin J (2018) Synergistic effect of carbon nanotube and graphene nanoplates on the mechanical, electrical and electromagnetic interference shielding properties of polymer composites and polymer composite foams. Chem Eng J 353:381–39310.1016/j.cej.2018.07.144 ↗
25. Li Y, Huang X, Zeng L, Li R, Tian H, Xuewei Fu, Wang Yu, Zhong W-H (2019) A review of the electrical and mechanical properties of carbon nano filler-reinforced polymer composites. J Mater Sci 54(2):1036–107610.1007/s10853-018-3006-9 ↗
26. Wang J, Fang Z, AijuanGu LX, Liu Fu (2006) Effect of amino-functionalization of multi-walled carbon nanotubes on the dispersion with epoxy resin matrix. J Appl Polym Sci 100(1):97–10410.1002/app.22647 ↗
27. Srivastava VK, Gries T, Veit D, Quadflieg T, Mohr B, Kolloch M (2017) Effect of nanomaterial on mode I and mode II interlaminar fracture toughness of woven carbon fabric reinforced polymer composites. Eng Fract Mech 180:73–8610.1016/j.engfracmech.2017.05.030 ↗
28. Avilés F, Oliva-Avilés AI, Cen-Puc M (2018) Piezoresistivity, strain, and damage self-sensing of polymer composites filled with carbon nanostructures. Adv Eng Mater 20(7):170115910.1002/adem.201701159 ↗
29. Wang L, Liu Y, Zhang Z, Wang B, JingjingQiu DH, Wang S (2017) Polymer composites-based thermoelectric materials and devices. Compos B Eng 122:145–15510.1016/j.compositesb.2017.04.019 ↗
30. Li SQ, Wang F, Wang Ye, Wang JW, Ma J, Xiao J (2008) Effect of acid and TETA modification on mechanical properties of MWCNTs/epoxy composites. J Mater Sci 43(8):2653–265810.1007/s10853-008-2489-1 ↗
31. Radzuan NA, Mohd MY, Zakaria AB, Sulong JS (2017) The effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites. Compos B Eng 110:153–16010.1016/j.compositesb.2016.11.021 ↗
32. Kinloch IA, Suhr J, Lou J, Young RJ, Ajayan PM (2018) Composites with carbon nanotubes and graphene: an outlook. Science 362(6414):547–55310.1126/science.aat7439 ↗
33. Bhuvaneswari V, Rajeshkumar L, Balaji D, Saravanakumar R (2020) Study of mechanical and tribological properties of bio-ceramics reinforced aluminium alloy composites. Solid State Technol 63(5):4552–4560
34. Ma PC, Tang BZ, Kim J-K (2008) Effect of CNT decoration with silver nanoparticles on electrical conductivity of CNT-polymer composites. Carbon 46(11):1497–150510.1016/j.carbon.2008.06.048 ↗
35. Ramesh M, Arivumani R (2020) Carbon nanotube-based metal-organic framework nanocomposites. In: Metal-Organic Framework Nanocomposites. CRC Press, pp 237–26010.1201/9780429346262-9 ↗
36. Špitalský Z, Krontiras CA, Georga SN, Galiotis C (2009) Effect of oxidation treatment of multiwalled carbon nanotubes on the mechanical and electrical properties of their epoxy composites. Compos A Appl Sci Manuf 40(6–7):778–78310.1016/j.compositesa.2009.03.008 ↗
37. Kim YJ, Shin TS, Choi HD, Kwon JH, Chung Y-C, Yoon HoGyu (2005) Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites. Carbon 43(1):23–3010.1016/j.carbon.2004.08.015 ↗
38. Jeong J-Y, Lee H-J, Kang S-W, Tan L-S, Baek J-B (2008) Nylon 610/functionalized multiwalled carbon nanotube composite prepared from in-situ interfacial polymerization. J Polym Sci Part A Polym Chem 46(18):6041–605010.1002/pola.22916 ↗
39. Shi Y-D, Lei M, Chen Y-F, Zhang K, Zeng J-B, Wang M (2017) Ultralow percolation threshold in poly (l-lactide)/poly (ε-caprolactone)/multiwall carbon nanotubes composites with a segregated electrically conductive network. J Phys Chem C 121(5):3087–309810.1021/acs.jpcc.6b11351 ↗
40. Al-Saleh MH (2017) Clay/carbon nanotube hybrid mixture to reduce the electrical percolation threshold of polymer nanocomposites. Compos Sci Technol 149:34–4010.1016/j.compscitech.2017.06.009 ↗
41. Ramesh M, ArunRamnath R, Anish K, Aftab APK, Abdullah MA (2020) Electrically conductive self-healing materials: preparation, properties, and applications. In: Self-healing composite materials. Woodhead Publishing, pp 1–13. https://doi.org/10.1016/B978-0-12-817354-1.00001-610.1016/B978-0-12-817354-1.00001-6 ↗
42. Tang Z, Tang CH, Gong H (2012) A High energy density asymmetric supercapacitor from nano-architectured Ni(OH)2/Carbon nanotube electrodes. Adv Funct Mater 22(6):1272–127810.1002/adfm.201102796 ↗
43. Guo Z et al (2007) Flexible high-loading particle-reinforced polyurethane magnetic anocomposite fabrication through particle-surface-initiated polymerization. Nanotechnology 18(33):33570410.1088/0957-4484/18/33/335704 ↗
44. Wang S et al (2015) Removal of arsenic by magnetic biochar prepared from pinewood and natural hematite. Biores Technol 175:391–39510.1016/j.biortech.2014.10.104 ↗
45. Ramesh M, Deepa C (2019) Processing of green composites. Green Composites. Springer, Singapore, pp 47–7210.1007/978-981-13-1972-3_2 ↗
46. Yu L et al (2009) Catalytic synthesis of carbon nanofibers and nanotubes by the pyrolysis of acetylene with iron nanoparticles prepared using a hydrogen-arc plasma method. Mater Lett 63(20):1677–167910.1016/j.matlet.2009.05.007 ↗
47. Chiu W et al (2007) One pot synthesis of monodisperse Fe3O4 nanocrystals by pyrolysis reaction of organometallic compound. Mater Chem Phys 106(2):231–23510.1016/j.matchemphys.2007.05.039 ↗
48. Ramesh M, Rajeshkumar L (2018) Wood flour filled thermoset composites. Materials Research Forum LLC. https://doi.org/10.21741/9781945291876-210.21741/9781945291876-2 ↗
49. Shen Y, Yoshikawa K (2014) Tar conversion and vapour upgrading via in situ catalysis using silica-based nickel nanoparticles embedded in rice husk char for biomass pyrolysis/gasification. Ind Eng Chem Res 53(27):10929–1094210.1021/ie501843y ↗
50. Liu X-M, Yang G, Fu S-Y (2007) Mass synthesis of nanocrystalline spinel ferrites by a polymer-pyrolysis route. Mater Sci Eng, C 27(4):750–75510.1016/j.msec.2006.07.026 ↗
51. Gong J et al (2013) Catalytic conversion of linear low density polyethylene into carbon nanomaterials under the combined catalysis of Ni2O3 and poly (vinyl chloride). Chem Eng J 215:339–34710.1016/j.cej.2012.11.037 ↗
52. Chen D-H, Liao M-H (2002) Preparation and characterization of YADH-bound magnetic nanoparticles. J Mol Catal B Enzym 16(5):283–29110.1016/S1381-1177(01)00074-1 ↗
53. Chi Y et al (2012) Synthesis of Fe3O4@ SiO2–Ag magnetic nanocomposite based on small-sized and highly dispersed silver nanoparticles for catalytic reduction of 4-nitrophenol. J Colloid Interface Sci 383(1):96–10210.1016/j.jcis.2012.06.027 ↗
54. Siddiqui M et al (2019) Characterization and process optimization of biochar produced using novel biomass, waste pomegranate peel: a response surface methodology approach. Waste Biomass Valoriz 10:521–53210.1007/s12649-017-0091-y ↗
55. Siddiqui M et al (2018) Thermogravimetric pyrolysis for neem char using novel agricultural waste: a study of process optimization and statistical modeling. Biomass Convers Biorefinery 8:857–87110.1007/s13399-018-0336-4 ↗
56. Bradbury WLEAO (2011) Synthesis of carbide nanostructures on monolithic agricultural-waste biomass-activated carbon templates. Int J Appl Ceram Technol 8(4):947–95210.1111/j.1744-7402.2010.02533.x ↗
57. Tan X et al (2015) Application of biochar for the removal of pollutants from aqueous solutions. Chemosphere 125:70–8510.1016/j.chemosphere.2014.12.058 ↗
58. An SJ, Li J, Daniel C, Mohanty D, Nagpure S, Wood DL (2016) The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling. Carbon 105:52–7610.1016/j.carbon.2016.04.008 ↗
59. Ramesh M, Logesh R, Manikandan M, Sathesh Kumar N, Vishnu DP (2017) Mechanical and water intake properties of banana-carbon hybrid fiber reinforced polymer composites. Mater Res 20(2):365–37610.1590/1980-5373-mr-2016-0760 ↗
60. Li F-S, Wu Y-S, Chou J, Winter M, Wu N-L (2015) A mechanically robust and highly ion-conductive polymer-blend coating for high-power and long-life lithium-ion battery anodes. Adv Mater 27:130–13710.1002/adma.201403880 ↗
61. Song G, Ryu J, Ko S, Bang BM, Choi S, Shin Y, Lee S-Y (2016) Revisiting surface modification of graphite: dual-layer coating for high-performance lithium battery anode materials. Chem-An Asian J 11(11):1711–171710.1002/asia.201600249 ↗
62. Son S-B, Cao L, Yoon T, Cresce A, Hafner SE, Liu J, Groner M, Xu K, Ban C (2019) Interfacially induced cascading failure in graphite-silicon composite anodes. Adv Sci 6(3):180100710.1002/advs.201801007 ↗
63. De Arco LG, Zhang Y, Schlenker CW, Ryu K, Thompson ME, Zhou CW (2010) Continuous, highly flexible, and transparent graphene films by chemical vapour deposition for organic photovoltaics. ACS Nano 4(5):2865–287310.1021/nn901587x ↗
64. Zhang Y, Gomez L, Ishikawa FN, Madaria A, Ryu K, Wang CA, Badmaev A, Zhou CW (2010) Comparison of graphene growth on single-crystalline and polycrystalline Ni by chemical vapour deposition. J Phys Chem Lett 1(20):3101–310710.1021/jz1011466 ↗
65. Karabacak T, Guclu H, Yuksel M (2009) Network behavior in thin film growth dynamics. Phys Rev B. https://doi.org/10.1103/PhysRevB.79.19541810.1103/PhysRevB.79.195418 ↗
66. Ramesh M, Bhoopathi R, Deepa C, Sasikala G (2018) Experimental investigation on morphological, physical and shear properties of hybrid composite laminates reinforced with flax and carbon fibers. J Chin Adv Mater Soc 6(4):640–65410.1080/22243682.2018.1534609 ↗
67. Teng C-C, Ma C-C, Chu-Hua Lu, Yang S-Y, Lee S-H, Hsiao M-C, Yen M-Y, Chiou K-C, Lee T-M (2011) Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites. Carbon 49(15):5107–511610.1016/j.carbon.2011.06.095 ↗
68. Wan Y, Tang L, Gong L, Yan D, Li Y, Wu L, Jiang J, Lai G (2014) Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties. Carbon 69:467–48010.1016/j.carbon.2013.12.050 ↗
69. Qian R, Jinhong Yu, Chao Wu, Zhai X, Jiang P (2013) Alumina-coated graphene sheet hybrids for electrically insulating polymer composites with high thermal conductivity. RSC Adv 3(38):17373–1737910.1039/c3ra42104j ↗
70. Sun R, Yao H, Zhang H-B, Li Y, Mai Y-W, Zhong-Zhen Yu (2016) Decoration of defect-free graphene nanoplatelets with alumina for thermally conductive and electrically insulating epoxy composites. Compos Sci Technol 137:16–2310.1016/j.compscitech.2016.10.017 ↗
71. Zong P, Jifang Fu, Chen L, Yin J, Dong X, Yuan S, Shi L, Deng W (2016) Effect of aminopropylisobutyl polyhedral oligomeric silsesquioxane functionalized graphene on the thermal conductivity and electrical insulation properties of epoxy composites. RSC Adv 6(13):10498–1050610.1039/C5RA24885J ↗
72. Ma W-S, Li Wu, Yang F, Wang S-F (2014) Non-covalently modified reduced graphene oxide/polyurethane nanocomposites with good mechanical and thermal properties. J Mater Sci 49(2):562–57110.1007/s10853-013-7736-4 ↗
73. Varenik M, Nadiv R, Levy I, Vasilyev G, Regev O (2017) Breaking through the solid/liquid processability barrier: thermal conductivity and rheology in hybrid graphene–graphite polymer composites. ACS Appl Mater Interfaces 9(8):7556–756410.1021/acsami.6b14568 ↗
74. Li An, Zhang C, Zhang Y-F (2017) RGO/TPU composite with a segregated structure as thermal interface material. Compos A Appl Sci Manuf 101:108–11410.1016/j.compositesa.2017.06.009 ↗
75. Tian L, Wang Y, Li Z, Mei H, Shang Y (2017) The thermal conductivity-dependant drag reduction mechanism of water droplets controlled by graphene/silicone rubber composites. Exp Thermal Fluid Sci 85:363–36910.1016/j.expthermflusci.2017.03.021 ↗
76. Balaji D, Ramesh M, Kannan T, Deepan S, Bhuvaneswari V, Rajeshkumar L (2020) Experimental investigation on mechanical properties of banana/snake grass fiber reinforced hybrid composites. Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.09.54810.1016/j.matpr.2020.09.548 ↗
77. Alam FE, Dai W, Yang M, Shiyu Du, Li X, Jinhong Yu, Jiang N, Lin C-T (2017) In situ formation of a cellular graphene framework in thermoplastic composites leading to superior thermal conductivity. J Mater Chem A 5(13):6164–616910.1039/C7TA00750G ↗
78. Yan H, Tang Y, Long W, Li Y (2014) Enhanced thermal conductivity in polymer composites with aligned graphene nanosheets. J Mater Sci 49(15):5256–526410.1007/s10853-014-8198-z ↗
79. Wu K, Lei C, Huang R, Yang W, Chai S, Geng C, Chen F, Qiang Fu (2017) Design and preparation of a unique segregated double network with excellent thermal conductive property. ACS Appl Mater Interfaces 9(8):7637–764710.1021/acsami.6b16586 ↗
80. Ryu J, Kim Y, Won D, Kim N, Park JS, Lee EK, Cho D, Cho SP, Kim SJ, Ryu GH, Shin HAS, Lee Z, Hong BH, Cho S (2014) Fast synthesis of high-performance graphene films by hydrogen-free rapid thermal chemical vapour deposition. ACS Nano 8(1):950–95610.1021/nn405754d ↗
81. Ramesh M, Rajesh Kumar L, Anish K, Abdullah MA (2020) Self-healing polymer composites and its chemistry. In: Self-healing composite materials. Woodhead Publishing, pp 415–42710.1016/B978-0-12-817354-1.00022-3 ↗
82. Wang F, Yi J, Wang Y, Wang C, Wang J, Xia Y (2014) Graphite intercalation compounds (GICs): a new type of promising anode material for lithium-ion batteries. Adv Energy Mater 4(2):130060010.1002/aenm.201300600 ↗
83. Vissers DR, Chen Z, Shao Y, Engelhard M, Das U, Redfern P, Curtiss LA, Pan B, Liu J, Amine K (2016) Role of Manganese deposition on graphite in the capacity fading of lithium ion batteries. ACS Appl Mater Interfaces 8(22):14244–1425110.1021/acsami.6b02061 ↗
84. Chang C-C, Liu S-J, Wu J-J, Yang C-H (2007) Nano-tin Oxide/Tin particles on a graphite surface as an anode material for lithium-ion batteries. J Phys Chem C 111(44):16423–1642710.1021/jp073379l ↗
85. Cao X, Li Y, Li X, Zheng J, Gao J, Gao Y, Wu X, Zhao Y, Yang Y (2013) Novel phosphamide additive to improve thermal stability of solid electrolyte interphase on graphite anode in lithium-ion batteries. ACS Appl Mater Interfaces 5(22):11494–1149710.1021/am4024884 ↗
86. Ramesh M, ArunRamnath R, Deepa C (2021) Friction and wear properties of carbon nanotube-reinforced polymer composites. In: Tribology of polymer composites: characterization, properties, and applications, pp 223–24010.1016/B978-0-12-819767-7.00012-8 ↗
87. Jiang S, Sun F, Fan H, Fang D (2017) Fabrication and testing of composite orthogrid sandwich cylinder. Compos Sci Technol 142:171–17910.1016/j.compscitech.2017.02.009 ↗
88. Wu SR, Chen TH, Tsai HY (2019) A review of actuation force in origami applications. J Mech 35(5):627–63910.1017/jmech.2019.21 ↗
89. Gattas JM, You Z (2015) The behaviour of curved-crease origami foldcores under low-velocity impact loads. Int J Solids Struct 53:80–9110.1016/j.ijsolstr.2014.10.019 ↗
90. Schenk M, Guest SD, McShane GJ (2014) Novel stacked folded cores for blast-resistant sandwich beams. Int J Solids Struct 51:4196–421410.1016/j.ijsolstr.2014.07.027 ↗
91. Kintscher M, Kärger L, Wetzel A, Hartung D (2007) Stiffness and failure behaviour of folded sandwich cores under combined transverse shear and compression. Compos Part A 38:1288–129510.1016/j.compositesa.2006.11.008 ↗
92. Ramesh M, Deepa C, Tamil Selvan M, Hemachandra Reddy K (2020) Effect of alkalization on characterization of ripe bulrush (Typha Domingensis) grass fiber reinforced epoxy composites. J Nat Fibers. https://doi.org/10.1080/15440478.2020.176444310.1080/15440478.2020.1764443 ↗
93. Demiral M, Kadioglu F (2018) Failure behaviour of the adhesive layer and angle ply composite adherends in single lap joints: a numerical study. Int J Adhes Adhes 87:181–19010.1016/j.ijadhadh.2018.10.010 ↗
94. Le Q-H, Kuan H-C, Dai J-B, Zaman I, Luong L, Ma J (2010) Structure–property relations of 55 nm particle-toughened epoxy. Polymer 51(21):4867–487910.1016/j.polymer.2010.08.038 ↗
95. Difallah BB, Kharrat M, Dammak M, Monteil G (2012) Microstructure, friction and wear analysis of thermoplastic based composites with solid lubricant. Mech Ind 13(5):337–34610.1051/meca/2012041 ↗
96. Ma J, Mo MS, Du XS, Dai SR, Luck I (2008) Study of epoxy toughened by in situ formed rubber nanoparticles. J Appl Polym Sci 110(1):304–31210.1002/app.27882 ↗
97. Kuan HC, Dai JB, Ma J (2010) A reactive polymer for toughening epoxy resin. J Appl Polym Sci 115(6):3265–327210.1002/app.31001 ↗
98. Maschio G, Koufopanos C, Lucchesi A (1992) Pyrolysis, a promising route for biomass utilization. Biores Technol 42(3):219–23110.1016/0960-8524(92)90025-S ↗
99. Harris K et al (2013) Characterization and mineralization rates of low temperature peanut hull and pine chip biochars. Agronomy 3(2):294–31210.3390/agronomy3020294 ↗
100. Goyal H, Seal D, Saxena R (2008) Bio-fuels from thermo-chemical conversion of renewable resources: a review. Renew Sustain Energy Rev 12(2):504–51710.1016/j.rser.2006.07.014 ↗