Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates
Source abstract
Abstract
The dynamic tensile properties and microstructural evolution of an extruded EW75 magnesium alloy deformed at ambient temperature and different high strain rates (from 1000 to 3000 s-1) along extrusion direction (ED) were investigated by Split Hopkinson Tension Bar (SHTB). The corresponding deformation mechanisms, texture evolution and microstructure changes were analyzed by optical microscope (OM), electron backscatter diffraction (EBSD) and transmission electron microscope (TEM). The results show that the extruded EW75 magnesium alloy along ED exhibits a conventional positive strain rate sensitivity that the dynamic flow stresses increase with increasing strain rate. Texture measurements show that after dynamic tension, the initial weak texture of extruded EW75 magnesium alloy tansforms to a relatively strong <10-10>//ED texture with increasing strain rates. The microstructural analysis demonstrates that dislocation motion are main deformatin mode to accommodate dynamic tensile deformation at high strain rates. In addition, the interactions of dislocation-dislocation and dislocation-second phase lead to the increase of flow stress and strain hardening with increasing strain rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Z. Liu, K. Zhang, X.Q. Zeng. The theory and application of magnesium based lightweight alloy. Beijing 2002.
2. H.E. Friedrich, B.L. Mordike. Magnesiuam Technology. Berlin, 2006.
3. Recent research and developments on wrought magnesium alloys10.1016/j.jma.2017.09.001 ↗
4. What is going on in magnesium alloys10.1016/j.jmst.2017.07.019 ↗
5. Superior light matals by texture engineering optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
6. Effect of alloying and extrusion temperature on the microstructure and mechanical properties of Mg-Zn and Mg-Zn-RE alloys10.1016/j.msea.2014.09.085 ↗
7. Effect of chemical composition on the microstructure, tensile properties and fatigue behavior of sand-cast Mg-Gd-Y-Zr alloy10.1016/j.msea.2014.06.049 ↗
8. Effect of strain rate and temperature on fracture of magnesium alloy AZ31B10.1016/j.actamat.2016.03.061 ↗
9. On the microstructure and mechanical property of as-extruded Mg-Gd-Y-Zn alloy with Sr addition10.1016/j.msea.2016.10.016 ↗
10. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures10.1016/j.matdes.2013.12.031 ↗
11. High speed cutting of AZ31 magnesium alloy10.1016/j.jma.2016.04.004 ↗
12. A new method for grain refinement in magnesium alloy: High speed extrusion machining10.1016/j.msea.2015.11.046 ↗
13. A texture and microstructure analysis of high speed rolling of AZ31 using split Hopkinson pressure bar results10.1007/s10853-013-7466-7 ↗
14. Characteristics of magnesium AZ31 alloys subjected to high speed rolling10.1016/j.msea.2015.03.083 ↗
15. Deformation induced dynamic recrystallization and precipitation strengthening in an Mg-Zn-Mn alloy processed by high strain rate rolling10.1016/j.matchar.2016.09.025 ↗
16. Dynamic precipitation, microstructure and mechanical properties of Mg-5Zn-1Mn alloy sheets prepared by high strain-rate rolling10.1016/j.matdes.2016.03.129 ↗
17. Dynamic Recrystallization Mechanisms during High Speed Rolling of Mg-3Al-1Zn Alloy Sheets10.1016/j.scriptamat.2015.10.040 ↗
18. Improving the mechanical properties of a ZM61 magnesium alloy by pre-rolling and high strain rate rolling
19. High-speed indirect extrusion of Mg-Sn-Al-Zn alloy and its influence on microstructure and mechanical properties10.1016/j.jallcom.2016.01.163 ↗
20. Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion10.1016/j.msea.2016.04.093 ↗
21. Dynamic tensile behaviors of AZ31B magnesium alloy processed by twin-roll casting and sequential hot rolling10.1016/S1003-6326(16)64413-8 ↗
22. Constitutive Behavior of Commercial Grade ZEK100 Magnesium Alloy Sheet over a Wide Range of Strain Rates10.1007/s11661-014-2300-7 ↗
23. Rate sensitivity and tension-compression asymmetry in AZ31B magnesium alloy sheet
24. Texture effect on high strain rates tension and compression deformation behavior of extruded AM30 alloy10.1016/j.msea.2011.12.068 ↗
25. Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates10.1016/j.actamat.2010.01.029 ↗
26. Evolution of Texture and Microstructure of AZ31 Mg Alloy Sheet at High Strain Rates[C]//10.4028/www.scientific.net/MSF.706-709.1255 ↗
27. Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion[J]10.1016/j.msea.2016.04.093 ↗
28. On the rupture of iron wire by a blow
29. The effect of momentary stresses in metals10.1098/rspl.1904.0145 ↗
30. The dynamic compression testing of solids by the method of the split Hopkinson pressure bar10.1016/0022-5096(63)90050-4 ↗
31. Separation of elastic waves in split Hopkinson bars using one-point strain measurements10.1007/BF02329807 ↗
32. Two-wave and three-wave method in SHPB data processing
33. Stress-strain response of textured AZ31B magnesium alloy under uniaxial tension at the different strain rates10.1016/j.msea.2012.08.103 ↗
34. Effect of temperature on the anisotropy of AZ31 magnesium alloy rolling sheet under high strain rate deformation10.1080/14786435.2018.1427896 ↗
35. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
36. Tensile characterization and constitutive modeling of AZ31B magnesium alloy sheet over wide range of strain rates and temperatures10.1016/j.jmatprotec.2010.09.010 ↗
37. High strain-rate behavior and deformation of a multilayer composite textured AZ31B Mg alloy plate10.1016/j.jallcom.2018.03.258 ↗
38. Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: Experiments and modeling10.1016/j.ijplas.2017.04.006 ↗
39. Effect of Al and Gd Solutes on the Strain Rate Sensitivity of Magnesium Alloys10.1007/s11661-009-0107-8 ↗
40. Microstructural evolution of pure magnesium under high strain rate loading10.1016/j.actamat.2014.12.030 ↗
41. Deformation and spallation of a magnesium alloy under high strain rate loading10.1016/j.msea.2016.03.009 ↗
42. High temperature mechanical behavior of low-pressure sand-cast Mg-Gd-Y-Zr magnesium alloy10.1016/j.jma.2019.07.006 ↗
43. Strain hardening behavior of Mg–Y alloys after extrusion process10.1016/j.jma.2019.09.004 ↗
44. Effect of Y and Gd content on the microstructure and mechanical properties of Mg–Y–RE alloys10.1016/j.jma.2019.03.002 ↗
45. Effects of Y content and temperature on the damping capacity of extruded Mg-Y sheets10.1016/j.jma.2019.05.003 ↗
46. Texture tailoring and bendability improvement of rolled AZ31 alloy using {10–12} twinning: The effect of precompression levels10.1016/j.jma.2019.09.002 ↗
47. Modeling strain rate sensitivity and high temperature deformation of Mg-3Al-1Zn alloy10.1016/j.jma.2019.04.004 ↗
48. Anisotropy of mechanical properties and crystallographic texture in hot rolled AZ31+XSr sheets10.1016/j.jma.2019.04.005 ↗
49. Dislocations-induced precipitates and their effect on mechanical properties of Mg-Gd-Y-Zr alloy10.1016/j.jma.2019.05.009 ↗
50. Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature10.1016/j.actamat.2011.07.047 ↗
51. Dynamic mechanical response and microstructural evolution of extruded Mg AZ31B plate over a wide range of strain rates10.1016/j.jallcom.2016.12.041 ↗
52. Tension-Compression Asymmetry of a Rolled Mg-Y-Nd Alloy10.1007/s12540-017-6853-z ↗
53. Deformation mechanism and texture and microstructure evolution during high-speed rolling of AZ31B Mg sheets10.1007/s10853-008-3021-3 ↗
54. Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadings10.1016/j.msea.2012.01.116 ↗
55. Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified
56. Activating profuse pyramidal slips in magnesium alloys via raising strain rate to dynamic level10.1016/j.jallcom.2016.07.097 ↗
57. Effects of pre-annealing on microstructure and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2017.09.214 ↗