The influence of surface roughness and chemical modification of silicon surfaces on dc-glow discharge enhanced diamond nucleation
Source abstract
Abstract
Abstract In this study the effect of surface roughness and damage, as well as chemical modification with Ti additives, in different dispersion states, on the dc glow discharge enhanced diamond nucleation on silicon were investigated. It was established that the relative sp 3 content in the carbon film produced by the dc-glow discharge process is enhanced as a result of surface damage. Consequently, diamond DPD (deposited particle density) obtained in the subsequent deposition is substantially enhanced. Also it was found that Ti surface coverage influences the efficiency of nucleation. Continuous Ti films have a deleterious effect on nucleation, while particles catalyze precursor film generation. This phenomenon was explained as a balance between Ti aided accumulation of carbon on the one hand, and Ti induced dissolution of diamond nucleation centers in the hydrogen rich atmosphere. As a result of surface abrasion the optimal temperature for nano-diamond formation during the dc glow discharge stage is shifted to lower temperatures relative to that observed for virgin silicon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. The chemical nature of the carbon precursor in bias enhanced nucleation of CVD diamond10.1016/S0925-9635(96)00702-9 ↗
2. DC glow discharge as a key step for bias enhanced nucleation of diamond by the HFCVD method10.1016/S0925-9635(97)00221-5 ↗
3. Formation of the precursor for diamond growth by in situ direct current glow discharge pretreatment10.1063/1.120747 ↗
4. Nanosize diamond formation promoted by direct current glow discharge process: Synchrotron radiation and high resolution electron microscopy studies10.1063/1.121404 ↗
5. Influence of substrate nature on the dc glow discharge induced nucleation of diamond10.1016/S0925-9635(98)00303-3 ↗
6. Effect of substrate pretreatment on diamond deposition in a microwave plasma10.1007/BF00349043 ↗
7. Enhancement of diamond nucleation by ultrasonic substrate abrasion with a mixture of diamond and metal particles10.1063/1.113486 ↗
8. Cooperative effect of metal powders and diamond abrasion on CVD diamond nucleation process
9. Mechanism of diamond formation on substrates abraded with a mixture of diamond and metal powders10.1016/0925-9635(95)00425-4 ↗
10. Kinetics of the initial stages of CVD diamond growth on non diamond substrates: surface catalytic effects and homoepitaxy10.1016/S0925-9635(96)00664-4 ↗
11. Heterogeneous chemical effects in the deposition of CVD diamond10.1016/S0925-9635(97)00219-7 ↗
12. Surface carbon saturation as a means of CVD diamond nucleation enhancement10.1016/S0925-9635(98)00261-1 ↗
13. Electric-field induced infrared absorption and Raman scattering in diamond10.1103/PhysRevB.2.1952 ↗
14. Surface enhanced Raman spectroscopy of chemical vapor deposited diamond films10.1063/1.102505 ↗
15. Effect of Ti ion implantation, abrasion with particles, and thin film evaporation on the formation of CVD diamond on Si substrates10.1016/S0022-0248(98)01119-1 ↗
16. Massive thinning of diamond films by a diffusion process10.1063/1.107133 ↗
17. Catalytic interaction of iron, nickel and platinum with diamond films: patterning applications10.1016/0925-9635(93)90248-Z ↗
18. From synthesis to chemical reactivity of supported d0 complexes. Part 1. An in situ infrared spectroscopy study of silica-anchored Zirconium hydrides10.1039/DT9940001153 ↗