journal article·2016-05-01

Plasma diagnostics using optical emission spectroscopy in laser drilling process

Joonghan Shin, J. Mazumder

Journal of Laser Applications· Volume 28· Issue 2
Publisher page

Abstract

An aero space material, Inconel 718, was laser drilled with a diode-pumped solid-state Nd:YAG laser. During the laser drilling process, the emission spectra of the Inconel 718 plasma have been recorded and analyzed using an optical emission spectroscopic method. Temporal histories of the plasma parameters including emission line intensity, electron temperature, and number density were examined in relation to drilling depths. The line intensity had an inverse proportional relationship with the drilling depth. The line intensity varied greatly at an earlier stage because a focused beam initially removed a large amount of material (a rate of the drilling depth increase was very high at the early stage). At a later stage, however, it varied as a function of drilling depth only to a minor degree because of the beam defocusing and further beam energy loss by the plasma. The electron temperature measured was in the range of 7700–9200 K, and it tended to decrease with drilling depth due to the downward movement of plasma core. The electron number density measured varied from ∼5 × 1015 to ∼8 × 1015 cm−3. The electron number density also tended to decrease with increasing drilling depth mostly due to the reduction of material removal.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Laser-induced spectroscopy and plasma · Laser Material Processing Techniques · Analytical chemistry methods development

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Michigan Center for Lasers and Plasmas for Advanced Manufacturing, , Ann Arbor, Michigan 48109-2125

References (20)

Show source-provided references
1. 1971 · 188
2. Spectroscopic studies of plasma during cw laser materials interaction10.1063/1.338142 ↗
3. Characterization of laser induced plasmas by optical emission spectroscopy: A review of experimental and methods10.1016/j.sab.2008.05.010 ↗
4. Spatially and temporally resolved temperature measurements of plasma generated in percussion drilling with a diode-pumped Nd:YAG laser10.1063/1.368626 ↗
5. The UV-visible spectroscopy of laser-produced aluminum plasmas10.1063/1.338815 ↗
6. Temporal and spatial evolution of the electronic density and temperature of the plasma produced by laser ablation of LiNbO310.1063/1.1335853 ↗
7. Time-resolved spectroscopic diagnostic of laser-induced plasma on germanium targets10.1063/1.3590159 ↗
8. Studies of eximer-laser-produce copper plasma in the presence of background gas10.1063/1.345359 ↗
9. Early phase laser induced plasma diagnostics and mass removal during single-pulse laser ablation of silicon10.1016/S0584-8547(99)00092-0 ↗
10. Diagnostics of silicon plasmas produced by visible nanosecond laser ablation10.1016/S0584-8547(01)00158-6 ↗
11. Measurement of electron density and temperature of a laser-induced zinc plasma10.1088/0022-3727/39/7/008 ↗
12. The effect of laser wavelength on laser-induced carbon plasma10.1063/1.4819892 ↗
13. Spectroscopic characterization of laser-induced plasma created during welding with a pulsed Nd:YAG laser10.1063/1.365198 ↗
14. Spectroscopic monitoring of penetration depth in CO2 Nd:YAG and fiber laser welding processes10.1016/j.jmatprotec.2011.11.016 ↗
15. See http://physics.nist.gov/PhysRefData/ASD/index.html for NIST Atomic Line Data base, The National Institute of Standards and Technology (NIST).
16. On the influence of Stark broadening on CrI lines in Stella atmospheres10.1051/0004-6361:20042318 ↗
17. 1997 · 279
18. Huddlestone · 1965
19. 1976 · 566
20. 1976 · 576