journal article·2016-07

Structure and chemistry of crankcase and exhaust soot extracted from diesel engines

Vibhu Sharma, Dairene Uy, Arup Gangopadhyay, Ann O'Neill, William A. Paxton, Alex Sammut, Monica A. Ford, Pranesh B. Aswath

Carbon· Volume 103
Publisher page

Abstract

Abstract Carbonaceous structure and chemical composition of diesel soot extracted from crankcase oil as well as soot taken from the exhaust have been investigated. Visible Raman spectroscopy indicated a higher degree of graphitization and smaller ionic impurities in the exhaust soot compared to crankcase soot and UV Raman indicated the presence of (CO3)2− and (PO4)3− in crankcase soot. Changes in the chemistry of the carbonaceous soot particles are due to its interaction with the lubricant in the crankcase and tribological contacts in the engine. HR-TEM images suggest turbostratic structure in soot agglomerates and nano-crystalline species embedded in crankcase soot while exhaust soot only showed turbostratic structure. EDS coupled with HR-TEM exhibited P, S, O, Ca and Zn in crankcase soot while the exhaust soot only exhibits C and O. Lattice spacing measurement suggests the possible composition of the nano-crystallites are phosphates, sulfates and oxides of Ca, Zn and Fe. XRD results revealed the crystalline species in soot extracted from crankcase oil are Ca2(SO4)2(H2O) (Bassanite) and Zn4(PO4)2(OH)2(H2O)3 (Spencerite). XANES analysis indicates the presence of ZnSO4, ZnS, FeSO4 along with CaSO4 and Ca3(PO4)2 as possible compounds that arise from interaction of the detergent chemistry with tribological surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lubricants and Their Additives · Thermal and Kinetic Analysis · Chemical Thermodynamics and Molecular Structure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Fundamentals of soot formation in flames with application to diesel engine particulate emissions10.1016/0360-1285(81)90002-2 ↗
3. Heavy-duty diesel engine oil developments and trends
4. History of mack engine lubricants tests from 1985-2005: Mack T-7 through Mack T-12
5. Variations in diesel soot reactivity along the exhaust after-treatment system, based on the morphology and nanostructure of primary soot particles10.1016/j.combustflame.2012.10.024 ↗
6. Examination of the oxidation behavior of biodiesel soot10.1016/j.combustflame.2006.06.010 ↗
7. Fingerprinting soot (towards source identification): physical structure and chemical composition10.1016/j.jaerosci.2009.08.008 ↗
8. Study of diesel soot collected from diesel particulate filters10.1016/j.carbon.2006.08.005 ↗
9. The study of the effect of exhaust gas recirculation on engine wear in a heavy-duty diesel engine using analytical ferrography10.4271/860378 ↗
10. The effects of soot-contaminated engine oil on wear and friction: a review10.1243/09544070JAUTO468 ↗
11. Effect of exhaust gas recirculation (EGR) contamination of diesel engine oil on wear10.1016/j.wear.2006.12.055 ↗
12. Experimental investigations of heavy metal addition in lubricating oil and soot deposition in an EGR operated engine10.1016/j.applthermaleng.2005.05.004 ↗
13. Contributions of soot contaminated oils to wear10.4271/981406 ↗
14. Soot and valve train wear in passenger car diesel engines
15. Role of carbon in lubricated mild wear10.1016/0301-679X(86)90016-2 ↗
16. Effect of lubricant additives on the prowear characteristics of synthetic diesel soots
17. Generation of synthetic diesel engine oil soots for wear studies
18. Carbon: cause of diesel engine wear?10.4271/770829 ↗
19. Characteristics of diesel engine soot that lead to excessive oil thickening10.1016/j.triboint.2011.11.003 ↗
20. Advantages of soft X-ray absorption over TEM-EELS for solid carbon studies – a comparative study on diesel soot with EELS and NEXAFS10.1016/j.carbon.2004.08.029 ↗
21. X-ray scattering and spectroscopy studies on diesel soot from oxygenated fuel under various engine load conditions10.1016/j.carbon.2005.05.017 ↗
22. Comparison of diesel engine soot with carbon black10.1016/S0008-6223(99)00035-4 ↗
23. Raman microprobe studies on carbon materials10.1016/0008-6223(94)90148-1 ↗
24. Soot characterization in atmospheric particles from different sources by NIR FT Raman spectroscopy10.1016/S0021-8502(99)80464-9 ↗
25. Soot structure investigation: adsorptional properties10.1016/0021-8502(96)00427-2 ↗
26. Structure and chemistry of crankcase and cylinder soot and tribofilms on piston rings from a Mack T-12 dynamometer engine test10.1016/j.triboint.2014.04.004 ↗
27. Morphology, structure and chemistry of extracted diesel soot: part II: X-ray absorption near edge structure (XANES) spectroscopy and high resolution transmission electron microscopy10.1016/j.triboint.2012.02.022 ↗
28. Role of thermal, mechanical and oxidising treatment on structure and chemistry of carbon black and its impact on wear and friction part I: extreme pressure condition
29. Understanding the deformation of soot particles/agglomerates in a dynamic contact: TEM in situ compression and shear experiments10.1007/s11249-013-0246-3 ↗
30. Characterization of gasoline soot and comparison to diesel soot: morphology, chemistry, and wear10.1016/j.triboint.2014.06.009 ↗
31. Morphology, structure and chemistry of extracted diesel soot—part I: transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and synchrotron X-ray diffraction study10.1016/j.triboint.2012.03.004 ↗
32. The influence of soot and dispersant on ZDDP film thickness and friction10.1002/ls.3010170103 ↗
33. Polishing wear by soot10.1016/0043-1648(90)90014-2 ↗
34. Soot wear in diesel engines10.1243/13506501J00505 ↗
35. Studies on friction and wear characteristics of cam and follower: influences of soot contamination in engine oil10.1016/S0389-4304(01)00166-7 ↗
36. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
37. Raman spectroscopy of carbon-containing particles10.1016/S0924-2031(01)00106-0 ↗
38. Raman spectroscopic characterization of some commercially available carbon black materials10.1016/0008-6223(95)00117-V ↗
39. Origin of the D peak in the Raman spectrum of microcrystalline graphite10.1016/S0022-3093(98)00349-4 ↗
40. Soot–additive interactions in engine oils10.1002/ls.103 ↗
41. Bianconi · 1988 · 573
42. Meisel · 1989
43. X-ray absorption spectroscopy in chemistry: II. X-ray absorption near edge structure10.1016/0165-9936(92)87056-P ↗
44. X-ray absorption spectroscopy in chemistry: I. Extended X-ray absorption fine structure10.1016/0165-9936(92)80046-9 ↗
45. An analytical study of tribofilms generated by the interaction of ashless antiwear additives with ZDDP using XANES and nano-indentation10.1016/j.triboint.2014.09.019 ↗
46. Synthesis and tribological behavior of ashless alkylphosphorofluoridothioates10.1016/j.triboint.2013.04.009 ↗
47. Synthesis and antiwear behavior of alkylthioperoxydiphosphates10.1179/1751584X12Y.0000000009 ↗
48. The contribution of XANES spectroscopy to tribology10.1139/v07-093 ↗
49. Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions10.1016/j.wear.2009.10.004 ↗
50. X-ray absorption spectroscopy and morphology study on antiwear films derived from ZDDP under different sliding frequencies10.1007/s11249-007-9213-1 ↗
51. Studies on ZDDP anti-wear films formed under different conditions by XANES spectroscopy, atomic force microscopy and 31P NMR10.1007/s11249-007-9275-0 ↗
52. Chemical and mechanical properties of ZDDP antiwear films on steel and thermal spray coatings studied by XANES spectroscopy and nanoindentation techniques10.1023/A:1024813203442 ↗
53. The correlation of microchemical properties to antiwear (AW) performance in ashless thiophosphate oil additives10.1007/s11249-004-8089-6 ↗
54. A variable temperature mechanical analysis of ZDDP-derived antiwear films formed on 52100 steel10.1016/j.wear.2006.06.016 ↗
55. Chemistry of anti-wear films from ashless thiophosphate oil additives10.1023/B:TRIL.0000032448.77085.f4 ↗
56. Combination of ashless antiwear additives with metallic detergents: interactions with neutral and overbased calcium sulfonates10.1016/j.triboint.2005.02.014 ↗
57. Chemical characterization of diesel soot using XANES
58. Sampling depth of total electron and fluorescence measurements in Si L-and K-edge absorption spectroscopy10.1016/0169-4332(96)00454-0 ↗
59. Sampling depth of total electron and fluorescence measurements in Si L- and K-edge absorption spectroscopy10.1016/0169-4332(96)00454-0 ↗
60. The use of X-ray absorption spectroscopy for monitoring the thickness of antiwear films from ZDDP10.1023/A:1019195404055 ↗
61. Chemical and mechanical analysis of tribofilms from fully formulated oils part 1 – films on 52100 steel
62. The chemical characterization of tribofilms using XANES – interaction of nanosize calciumcontaining detergents with zinc dialkyldithiophosphate10.1139/v07-045 ↗
63. Tribological behavior and nature of tribofilms generated from fluorinated ZDDP in comparison to ZDDP under extreme pressure conditions–part 1: structure and chemistry of tribofilms10.1016/j.triboint.2010.10.018 ↗