journal article·2018-04

Beyond the dimensional limitation in bio-inspired composite: Insertion of carbon nanotubes induced laminated Cu composite and the simultaneously enhanced strength and toughness

Linglong Meng, Xiaojun Wang, Jiangli Ning, Xiaoshi Hu, Guohua Fan, Kun Wu

Carbon· Volume 130
Publisher page

Abstract

Abstract Metal/reinforcement nanolayered composites can effectively balance the strength and toughness. However, the difficulty of inserting nanoscaled metal layers restricts their practical application. In this study, laminated carbon nanotubes (CNTs) reinforced Cu composites with microscaled metal layered were fabricated by a feasible method and exhibited simultaneously enhanced strength and toughness. CNTs were deposited on Cu foils by electrophoretic deposition with two-dimensional homogeneous dispersion. Insertion of CNTs induced the laminated Cu composite with repeated layer spacing of ∼20 μm through hot pressing and hot rolling. Simultaneously enhanced yield strength (183 MPa) and elongation (30.9%) were obtained with only 0.067 vol% CNTs. The strength improvement reached far beyond the mixture rule in metal matrix composites (MMCs) with homogeneous CNTs dispersion. CNTs and the induced interfaces serve as effective dislocations motion barriers and strengthen the composite. Laminated composite exhibited more stable deformation due to suppressed strain location by the layered structure. This work highlights the strengthening and toughening effects of laminated structure induced by CNTs, and provides a feasible method to build the laminated MMCs with adjustable metal layer thickness and CNTs amount, thus breaking the dimensional limit of metal layers in the design of laminated MMCs with enhanced mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrophoretic Deposition in Materials Science · Bone Tissue Engineering Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Merger of structure and material in nacre and bone-Perspectives on de novo biomimetic materials10.1016/j.pmatsci.2009.05.001 ↗
3. Biological materials: structure and mechanical properties10.1016/j.pmatsci.2007.05.002 ↗
4. In situ observation of nanograin rotation and deformation in nacre10.1021/nl061775u ↗
5. Fabrication and mechanical properties of TiBw/Ti-Ti (Al) laminated composites10.1016/j.matdes.2015.10.025 ↗
6. Bioinspired structural materials10.1038/nmat4089 ↗
7. Ultratough artificial nacre based on conjugated cross-linked graphene oxide10.1002/anie.201210166 ↗
8. A novel approach to developing biomimetic (“Nacr-Like”) metal-compliant-phase (Nickel-Alumina) ceramics through coextrusion10.1002/adma.201602471 ↗
9. Aligning graphene in bulk copper: nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity10.1016/j.carbon.2017.02.089 ↗
10. Binary synergy strengthening and toughening of bio-inspired nacre-like graphene oxide/sodium alginate composite paper10.1021/acsnano.5b02333 ↗
11. Mechanical properties of graphene platelet-reinforced alumina ceramic composites10.1016/j.ceramint.2013.01.041 ↗
12. Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets10.1016/j.compositesa.2017.05.011 ↗
13. The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution10.1016/j.carbon.2011.12.057 ↗
14. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
15. Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing10.1002/adma.200401933 ↗
16. Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites10.1016/j.actamat.2016.12.022 ↗
17. Sandwich-type laminated nanocomposites developed by selective dip-coating of carbon nanotubes10.1002/adma.200600908 ↗
18. High-strength laminated copper matrix nanocomposites developed from a single-walled carbon nanotube film with continuous reticulate architecture10.1002/adfm.201201532 ↗
19. Cu/single-walled carbon nanotube laminate composites fabricated by cold rolling and annealing10.1088/0957-4484/18/20/205607 ↗
20. Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites10.1038/ncomms3114 ↗
21. Strain field in a brittle/ductile multilayered steel composite10.1016/j.scriptamat.2011.01.048 ↗
22. Revealing extraordinary tensile plasticity in layered Ti-Al metal composite10.1038/srep38461 ↗
23. Fabrication and electron field emission properties of carbon nanotube films by electrophoretic deposition10.1002/1521-4095(200112)13:23<1770::AID-ADMA1770>3.0.CO;2-G ↗
24. Characterisation of carbon nanotube films deposited by electrophoretic deposition10.1016/j.carbon.2008.08.028 ↗
25. Electrophoretic deposition of carbon nanotubes10.1016/j.carbon.2006.06.021 ↗
26. Intermetallic catalyst for carbon nanotubes (CNTs) growth by thermal chemical vapor deposition method10.1016/j.carbon.2005.12.043 ↗
27. Bio-inspired, Graphene/Al2O3 doubly reinforced aluminum composites with high strength and toughness
28. Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests10.1016/j.compscitech.2015.03.009 ↗
29. Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons10.1016/j.carbon.2017.03.055 ↗
30. The role of Interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites10.1002/smll.200701223 ↗
31. Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite10.1021/acsnano.5b01067 ↗
32. A combination of ball milling and high-ratio differential speed rolling for synthesizing carbon nanotube/copper composites10.1016/j.carbon.2013.04.105 ↗
33. Enhanced mechanical properties of graphene/copper nanocomposites using a molecular-level mixing process10.1002/adma.201302495 ↗
34. Enhanced strength and excellent transport properties of a superaligned carbon nanotubes reinforced copper matrix laminar composite10.1016/j.compositesa.2016.05.027 ↗
35. Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing10.1016/j.carbon.2011.12.034 ↗
36. Microstructure and strengthening mechanism of carbon nanotubes reinforced magnesium matrix composite10.1016/j.msea.2014.01.008 ↗
37. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
38. Reinforcement with carbon nanotubes in aluminum matrix composites10.1016/j.scriptamat.2008.04.006 ↗
39. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements10.1016/S1359-6454(02)00510-4 ↗
40. Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration10.1016/j.msea.2011.08.035 ↗
41. Fracture behavior and strain evolution of laminated composites10.1016/j.compstruct.2016.12.036 ↗
42. Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper10.1002/adma.200601472 ↗