journal article·2014-01

Structure–property relationships in thermally-annealed multi-walled carbon nanotubes

Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Yoshinori Sato, Toshiyuki Takagi, Toshiyuki Hashida

Carbon· Volume 66
Publisher page

Abstract

Abstract The mechanical properties of individual multi-walled carbon nanotubes (MWCNTs) synthesized by a catalytic chemical vapor deposition (CVD) method followed by a series of high temperature annealing steps at 1200, 1800, 2200 and 2600 °C are investigated by a manipulator tool operated inside a scanning electron microscope. To investigate the relationship between the MWCNT structure and mechanical properties, such MWCNTs with a significantly different nanostructure are separately tested in tension, and subsequently observed their nanostructure and fracture morphology by a transmission electron microscope. The results show that the thermal annealing is effective for improving both the strength and modulus of the catalytic CVD-grown MWCNTs. The MWCNTs annealed at 1800, 2200 and 2600 °C display enhancements to their strengths by factors of ∼5.4, ∼5.1 and ∼15.6, and moduli by factors of ∼5.9, ∼13.2 and ∼18.9, respectively, compared to the MWCNTs annealed at 1200 °C. This effect is associated with the degree of waviness of the graphitic planes along the nanotube axis as well as the degree of crystallinity of the MWCNTs: the strength and modulus of the MWCNTs increases with a higher degree of orientation of the 0 0 2 graphitic planes and with a lower degree of defect concentration in the MWCNT structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Processing of carbon nanotube reinforced aluminum composite10.1557/JMR.1998.0340 ↗
2. Carbon nanotube-metal-oxide nanocomposites: Microstructure, electrical conductivity and mechanical properties10.1016/S1359-6454(00)00147-6 ↗
3. Aligned multi-walled carbon nanotube-reinforced composites: processing and mechanical characterization10.1088/0022-3727/35/16/103 ↗
4. Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content10.1016/j.compscitech.2004.04.002 ↗
5. A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties10.1088/0957-4484/19/31/315708 ↗
6. Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method10.1016/j.compscitech.2011.08.009 ↗
7. Elastic modulus of ordered and disordered multiwalled carbon nanotubes10.1002/(SICI)1521-4095(199902)11:2<161::AID-ADMA161>3.0.CO;2-J ↗
8. Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements10.1038/nnano.2008.211 ↗
9. Exceptionally high Young’s modulus observed for individual carbon nanotubes10.1038/381678a0 ↗
10. Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes10.1126/science.277.5334.1971 ↗
11. Electrostatic deflections and electromechanical resonances of carbon nanotubes10.1126/science.283.5407.1513 ↗
12. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
13. Mechanical properties of chemical vapor deposition-grown multiwalled carbon nanotubes10.1063/1.1946186 ↗
14. Catalytically grown carbon nanotubes of small diameter have a high Young’s modulus10.1021/nl051034d ↗
15. Diameter-dependent elastic modulus supports the metastable-catalyst growth of carbon nanotubes10.1021/nl070502b ↗
16. Nanotube fracture during the failure of carbon nanotube/alumina composites10.1016/j.carbon.2011.04.022 ↗
17. The influence of nanoscale defects on the fracture of multi-walled carbon nanotubes under tensile loading10.1016/j.diamond.2010.01.045 ↗
18. Calibration of rectangular atomic force microscope cantilevers10.1063/1.1150021 ↗
19. Mechanics of hydrogenated amorphous carbon deposits from electron-beam-induced deposition of a paraffin precursor10.1063/1.1940138 ↗
20. Mechanics of crystalline boron nanowires10.1016/j.compscitech.2005.11.030 ↗
21. Saito · 1998
22. Diameter control of single-walled carbon nanotubes10.1016/S0008-6223(00)00090-7 ↗
23. On the tensile strength distribution of multiwalled carbon nanotubes10.1063/1.2130713 ↗
24. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
25. Molecular mechanics simulation of the sliding behavior between nested walls in a multi-walled carbon nanotube10.1016/j.carbon.2010.04.031 ↗
26. Prediction of pull-out force of multi-walled carbon nanotube (MWCNT) in sword-in-sheath mode10.1016/j.commatsci.2012.03.016 ↗
27. Mechanical properties of vapour-grown carbon fibres10.1088/0022-3727/20/3/008 ↗
28. Synthesis of continuous SiC fibers with high tensile strength10.1111/j.1151-2916.1976.tb10975.x ↗
29. In situ transmission electron microscope tensile testing reveals structure-property relationships in carbon nanofibers10.1016/j.carbon.2013.04.018 ↗
30. Stochastic strength of nanotubes: an appraisal of available data10.1016/j.compscitech.2005.07.021 ↗
31. Multi-scale mechanical improvement produced in carbon nanotube fibers by irradiation cross-linking10.1016/j.carbon.2012.12.016 ↗
32. Reinforcing multiwall carbon nanotubes by electron beam irradiation10.1063/1.3493049 ↗