journal article·2011-11

Preparation and characterisation of demineralised tyre derived activated carbon

O.S. Chan, W.H. Cheung, G. McKay

Carbon· Volume 49· Issue 14
Publisher page

Abstract

Abstract The effect of demineralisation and activation conditions on the physical and chemical properties of activated carbon adsorbents produced from waste tyre char has been investigated. Experimental data showed that hydrochloric acid treatment prior to the activation is able to remove certain mineral contents such as zinc, calcium, sodium and others from the tyre char. The removal of some of the components which have catalytic effect on the activation increase the yield of the activated carbon and at the same time lower the ash content of the tyre activated carbon. The tyre demineralised activated carbons are generally mesoporous with a surface area up to 960 m2/g and therefore are comparable to commercial products. The adsorption of phenol onto the tyre activated carbon was also tested and the Redlich–Peterson equilibrium isotherm model gave the best-fit to experimental data for the phenol using the non-linear error functions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Roskill. The economics of activated carbon; 2008 [01/10/2008].
2. Adsorption kinetics for the removal of chromium(VI) from aqueous solution by adsorbents derived from used tyres and sawdust10.1016/S1385-8947(01)00194-2 ↗
3. Cherry stones as precursor of activated carbons for supercapacitors10.1016/j.matchemphys.2008.09.010 ↗
4. peanut shell activated carbon: characterization, surface modification and adsorption of Pb2+ from aqueous solution10.1016/S1004-9541(08)60096-8 ↗
5. Sulfur fixation on bagasse activated carbon by chemical treatment and its effect on acid dye adsorption10.1007/s10450-009-9194-5 ↗
6. Adsorption of acid dyes by bamboo derived activated carbon10.1016/j.desal.2007.02.026 ↗
7. Anon. Reuse of scrap tire promoted by the government. China Chemical Reporter; 2005(23).
8. Preparation of activated carbons from used tyres by gasification with steam and carbon dioxide10.1016/j.apsusc.2005.11.029 ↗
9. Production of active carbons from waste tyres – a review10.1016/j.carbon.2004.06.023 ↗
10. A study of the characteristics of activated carbons produced by steam and carbon dioxide activation of waste tyre rubber10.1016/S0008-6223(02)00449-9 ↗
11. Production, characterization and properties of chloridized mesoporous activated carbon from waste tyres10.1177/0734242X08096137 ↗
12. Preparation and characterization of mesoporous activated carbon from waste tires10.1016/S0008-6223(02)00267-1 ↗
13. Adsorption of phenol and reactive dye from aqueous solution on activated carbons derived from solid wastes10.1016/j.watres.2004.01.002 ↗
14. Porosity and surface characteristics of activated carbons produced from waste tyre rubber10.1002/jctb.518 ↗
15. Preparation and characterization of activated carbons from scrap tires, almond shells, and Illinois coal10.1080/00986449208936097 ↗
16. Conversion of waste tyres into carbon black and their utilization as adsorbent10.1002/jccs.200600144 ↗
17. Mesoporous activated carbon from waste tyre rubber for dye removal from effluents
18. Steam gasification of tyre waste, poplar, and refuse-derived fuel: a comparative analysis10.1016/j.wasman.2008.06.003 ↗
19. Evaluation of two different scrap tires as hydrocarbon source by pyrolysis10.1016/j.fuel.2005.04.002 ↗
20. Influence of process conditions on the rate of activation of chars derived from pyrolysis of used tires10.1021/ef9801524 ↗
21. Steam activation of pyrolytic tyre char at different temperatures10.1016/j.jaap.2008.11.002 ↗
22. Production of activated carbon by waste tire thermochemical degradation with CO210.1016/j.jhazmat.2009.02.167 ↗
23. Porosity development in carbons derived from scrap automobile tires10.1016/j.carbon.2007.05.012 ↗
24. Enhanced mercury adsorption in activated carbons from biomass materials and waste tires10.1016/j.fuproc.2007.03.008 ↗
25. Influence of carbon dioxide partial pressure and fluidization velocity on activated carbons prepared from scrap car tyre in a fluidized bed10.1016/j.ces.2006.09.047 ↗
26. The adsorptive capacity of vapor-phase mercury chloride onto powdered activated carbon derived from waste tires10.1080/10473289.2006.10464562 ↗
27. Adsorption–desorption characteristics of phenol and reactive dyes from aqueous solution on mesoporous activated carbon prepared from waste tires10.1016/j.watres.2004.12.044 ↗
28. Mesoporous carbons from waste tire char and their application in wastewater discoloration10.1016/S1387-1811(02)00380-3 ↗
29. Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires10.1016/S0165-2370(00)00207-2 ↗
30. Bansal · 1988
31. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
32. ASTM. Annual book of ASTM standards Vol. 15.01 – refractories, carbon and graphite products. Activated carbon. Easton: ASTM; 2007.
33. Marsh · 2006
34. Gregg · 1982
35. Studies on pore systems in catalysts. V. The t method10.1016/0021-9517(65)90307-6 ↗
36. Porous structure and adsorption properties of active carbons
37. Kinetic model comparison for waste tire char reaction with CO210.1021/ie040026p ↗
38. Applications for activated carbons from waste tires: natural gas storage and air pollution control10.1016/0950-4214(96)00007-2 ↗
39. Adsorbed natural gas storage with activated carbons made from Illinois coals and scrap tires10.1021/ef960201h ↗
40. Reprocessing of used tires into activated carbon and other products10.1021/ie00048a023 ↗
41. Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires10.1080/10473289.2005.10464728 ↗
42. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
43. Experimental confirmation of different mechanisms of evaporation from ink-bottle type pores: equilibrium, pore blocking, and cavitation10.1021/la026140z ↗
44. Removal of mercury(II) from aqueous solutions and chlor-alkali industry effluent by steam activated and sulphurised activated carbons prepared from bagasse pith: kinetics and equilibrium studies10.1016/S0304-3894(02)00014-6 ↗
45. Fixation of sulphur by carbon blacks on treatment with aqueous solution of hydrogen sulphide
46. Role of chemical pre-treatment in the development of super-high surface areas and heteroatom fixation in activated carbons prepared from bagasse10.1016/j.micromeso.2008.05.020 ↗
47. Activated carbon surfaces for environmental remediation10.1016/S1573-4285(06)80014-1 ↗
48. Effect of leaching high sulphur subbituminous coal by potassium hydroxide and acid on removal of mineral matter and sulphur10.1016/S0016-2361(02)00360-5 ↗
49. Yeung KY. Production and characterization of activated carbon from waste tyre char by steam activation. MPhil Thesis. Hong Kong University of Science and Technology; 2009. p. 73–5.
50. On the difference between the isoelectric point and the point of zero charge of carbons10.1016/0008-6223(95)96817-R ↗
51. Effects of surface chemistry on aromatic compound adsorption from dilute aqueous solutions by activated carbon10.1021/jp025522a ↗
52. A general treatment and classification of the solute adsorption isotherm. I. Theoretical10.1016/0021-9797(74)90252-5 ↗
53. Liquid-phase adsorption of phenol by activated carbons prepared from bituminous coals with different oxygen contents10.1002/(SICI)1097-4660(199902)74:2<123::AID-JCTB991>3.0.CO;2-5 ↗
54. The constitution and fundamental properties of solids and liquids. Part I. Solids10.1021/ja02268a002 ↗
55. Over the adsorption in solution
56. A useful adsorption isotherm10.1021/j150576a611 ↗
57. On the structure of a catalyst surface10.1063/1.1746922 ↗