Preparation of fibrous porous materials by chemical activation 2. H3PO4 activation of polymer coated fibers
Source abstract
Abstract
Abstract Fibrous porous materials (FPMs) have been prepared by coating a glass fiber with a solution of polymer and ZnCl 2 , followed by stabilization in air and heat treatment in N 2 . The ZnCl 2 was then removed by washing with D.I. water and HCl. Four kinds of polymers, a phenolic resin, polyacrylonitrile, poly(vinyl alcohol) and cellulose, were used to prepare solutions with ZnCl 2 . The results showed that ZnCl 2 acts as a dehydration agent to promote the thermal cross-linking of polymer at a much lower temperature, leading to FPMs having much higher char yields and very high surface areas. The porosity was created in part by dissolution of the ZnCl 2 left in the charred coating. The activation temperature and ZnCl 2 concentration play an important role in porosity development. In the early stage of heating, the specific surface area, micropore and mesopore volumes increased with increasing temperature. As the activation temperature increases above 450°C, ZnCl 2 begins to volatilize out of the coating, and further charring and aromatization of the coating results in a dimensional contraction leading to a decrease in the micropore and mesopore volumes. It was observed that the specific surface area, as well as micropore and mesopore volumes, increased with increasing ZnCl 2 concentration. Pore size analysis showed that the FPMs activated with ZnCl 2 were mainly microporous. For FPMs activated with concentrated ZnCl 2 (66 wt.%), there is a remarkable and large mesopore size distribution in addition to the typical micropore size distribution. In addition, such FPMs have very high specific surface area, more than 1600 for PAN-based and 2500 m 2 /g of coating for cellulose-based FPMs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · Electrospun Nanofibers in Biomedical Applications · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Activated carbons—production and applications
2. Preparation and characterization of activated carbons from coconut shell impregnated with phosphoric acid10.1016/0008-6223(89)90123-1 ↗
3. Adsorbent carbon synthesis from coals by phosphoric acid activation10.1016/0008-6223(92)90140-R ↗
4. Activated carbon from lignocellulosic materials by chemical and/or physical activation: an overview10.1016/0008-6223(92)90143-K ↗
5. Some considerations of the origins of porosity in carbons from chemically activated wood10.1016/0008-6223(93)90071-H ↗
6. Influence of the atmosphere used in the carbonization of phosphoric acid impregnated peach stones10.1016/0008-6223(95)91248-6 ↗
7. Evolution of carbon structure in chemically activated wood10.1016/0008-6223(95)00067-N ↗
8. Porosity in granular carbons activated with phosphoric acid10.1016/0008-6223(95)00059-M ↗
9. Production of activated carbons from a Washington lignite using phosphoric acid activation10.1016/S0008-6223(96)00093-0 ↗
10. Development of porosity in combined phosphoric acid–carbon dioxide activation10.1016/0008-6223(95)00209-X ↗
11. Phosphoric acid activation of nutshells for metals and organic remediation: process optimization10.1002/(SICI)1097-4660(199807)72:3<255::AID-JCTB890>3.0.CO;2-P ↗
12. Influence of the atmosphere in the chemical activation of wood by phosphoric acid10.1016/S0008-6223(98)80123-1 ↗
13. The effect of activation method on the properties of pecan shell-activated carbons10.1002/(SICI)1097-4660(199911)74:11<1037::AID-JCTB160>3.0.CO;2-O ↗
14. Preparation of activated carbon‘ membranes’ by physical and chemical activation of cork10.1016/S0008-6223(99)00013-5 ↗
15. Comparison of the surface features of two wood-based activated carbons10.1021/ie9906316 ↗
16. Surface functionality and porosity of activated carbons obtained from chemical activation of wood10.1016/S0008-6223(99)00134-7 ↗
17. Preparation of fibrous porous materials by chemical activation 1. ZnCl2 activation of polymer coated fibers10.1016/S0008-6223(01)00268-8 ↗
18. Economy J, Daley MA. Coated absorbent fibers. US Pat. 5834114, 1998.
19. Low-cost activated carbon fiber assemblies for control of contaminants from air/water
20. Design of new materials for environmental control10.1002/masy.19991430108 ↗
21. Adsorption of organic contaminants from water using tailored ACFs10.1021/cm000880g ↗
22. Removal of chemical contaminants from water to below USEPA MCL using fiber glass supported activated carbon filters
23. Bellamy · 1954
24. Infra-red analysis of phosphorus compounds10.1002/jctb.5010061007 ↗
25. Carbonization mechanisms resulting from intumescence association with the ammonium polyphosphate–pentaerythritol fire retardant system10.1016/0008-6223(93)90079-P ↗
26. The inhibition of graphite oxidation by phosphorus additives10.1016/0008-6223(84)90172-6 ↗
27. New analysis method for the determination of the pore size distribution of porous carbons from nitrogen adsorption measurements10.1016/0008-6223(89)90035-3 ↗
28. Pore size distribution analysis of microporous carbons: A density functional theory approach10.1021/j100120a035 ↗
29. Determination of pore size distributions from the density functional theory
30. Modelling physical adsorption on porous and nonporous solids using density functional theory10.1007/BF00486565 ↗