journal article·2022-03

Novel laminated multi-layer graphene/Cu–Al–Mn composites with ultrahigh damping capacity and superior tensile mechanical properties

Zhixian Jiao, Qingzhou Wang, Fuxing Yin, Jianjun Zhang, Li Liu, Puguang Ji, Huanghai Chu, Jiaojiao Yu

Carbon· Volume 188
Publisher page

Abstract

Abstract Laminated multi-layer graphene/Cu–Al–Mn composites were prepared via packaged hot roll bonding process for the first time. Microscopic observation shows that the grains in the Cu–Al–Mn layers are remarkably refined. Multi-layer graphene films intermittently disperse at the interfaces between Cu–Al–Mn layers. Some small fragments of multi-layer graphene films are squeezed into the Cu–Al–Mn layer, and around them, due to the formation of in-situ Al2O3 phase and nano-twins, multi-stage and multi-phase structures are formed. Performance tests show that the composites have ultrahigh damping capacity. Within a wide temperature range of 25–300 °C, the value of damping plateau is up to 0.1 (about 10 times that of the original Cu–Al–Mn alloy). The composites also have superior tensile mechanical properties. Their tensile strength and elongation are up to 913.3 MPa and 13.4% respectively (2.5 times and 4.1 times that of the original Cu–Al–Mn alloy). Microstructural origins of the excellent comprehensive properties were discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electromagnetic wave absorption materials · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Vibration damping mechanism of CuAlMn/polymer/carbon nanomaterials multi-scale composites10.1016/j.compositesb.2020.108266 ↗
2. A simulation-driven design approach to the manufacturing of stiff composites with high viscoelastic damping10.1016/j.compscitech.2021.108744 ↗
3. Shape memory and superelastic ceramics at small scales10.1126/science.1239745 ↗
4. Damping properties of carbon fiber reinforced composites hybridized with polysulfone (PSF)/cellulose nanocrystal (CNC) interleaves10.1016/j.compscitech.2021.108904 ↗
5. Multiscale modeling of vibration damping response of shape memory polymer fibers10.1016/j.compositesb.2015.12.046 ↗
6. Grain size dependence of pseudoelasticity in polycrystalline Cu-Al-Mn-based shape memory sheets10.1016/j.actamat.2013.03.022 ↗
7. Effect of heat treatment on the two internal friction peaks in a Cu-Al-Mn shape memory alloy10.1016/j.jallcom.2009.11.072 ↗
8. Strong heating rate-dependent deterioration of shape memory effect in up/step quenched Cu-based alloys: a ductile Cu-Al-Mn alloy as an example10.1016/j.actamat.2016.04.004 ↗
9. Effect of aging on structure and shape memory behavior of a Cu-Al-Mn-Ti-C shape memory alloy10.1016/j.tca.2020.178760 ↗
10. Effects of grain refinement on the structure and properties of a CuAlMn shape memory alloy10.1016/j.msea.2016.04.009 ↗
11. Microstructural, mechanical, and damping properties of a Cu-based shape memory alloy refined by an in situ LaB6/Al inoculant10.1007/s11661-019-05153-9 ↗
12. Effects of Cu51Zr14 inoculant and caliber rolling on microstructures and comprehensive properties of a Cu-Al-Mn shape memory alloy10.1016/j.msea.2019.138773 ↗
13. High damping capacity and low density M2052/Al composites prepared by accumulative roll bonding10.1016/j.jallcom.2018.05.104 ↗
14. High performance Nb/TiNi nanocomposites produced by packaged accumulative roll bonding10.1016/j.compositesb.2020.108403 ↗
15. Damping behavior of Al/SiCP multilayer composite manufactured by roll bonding10.1016/j.matdes.2012.06.009 ↗
16. Thickness effect of graphene film on optimizing the interface and mechanical properties of Cu/Ni multilayer composites10.1016/j.msea.2020.140111 ↗
17. Microstructure and mechanical properties of SUS304/Q235 multilayer steels fabricated by roll bonding and annealing10.1016/j.msea.2018.10.054 ↗
18. All in the graphene family–A recommended nomenclature for two-dimensional carbon materials10.1016/j.carbon.2013.08.038 ↗
19. Layer-by-layer synthesis of bilayer and multilayer graphene on Cu foil utilizing the catalytic activity of cobalt nano-powders10.1016/j.carbon.2019.02.024 ↗
20. Uniform dispersion of multi-layer graphene reinforced pure titanium matrix composites via flake powder metallurgy10.1016/j.msea.2018.04.056 ↗
21. Preparation and tribological properties of TiAl matrix composites reinforced by multilayer graphene10.1016/j.carbon.2013.09.077 ↗
22. Interface microstructure and strengthening mechanisms of multilayer graphene reinforced titanium alloy matrix nanocomposites with network architectures10.1016/j.matdes.2020.109119 ↗
23. Multi-layer graphene reinforced aluminum–Manufacturing of high strength composite by friction stir alloying10.1016/j.compositesb.2017.10.028 ↗
24. Fabrication of graphene coating bonded to mild steel via covalent bonding for high anticorrosion performance10.1016/j.jallcom.2019.07.159 ↗
25. Grain size and pseudoelastic behaviour of a Cu–Al–Be alloy10.1016/j.matchar.2006.11.009 ↗
26. Evaluation of mechanical and thermal properties of bilayer graphene reinforced aluminum matrix composite produced by hot accumulative roll bonding10.1016/j.jallcom.2019.06.127 ↗
27. Hot deformation and processing maps of as-extruded Mg-9.8Gd-2.7Y-0.4Zr Mg alloy10.1016/j.msea.2013.03.090 ↗
28. Evolution of inhomogeneous reinforced structure in TiBw/Ti-6AL-4V composite prepared by pre-sintering and canned β extrusion10.1016/j.matdes.2015.09.014 ↗
29. Accelerated kinetics of surface hardening by diffusion near phase transition temperature: mechanism of growth of boride layers on titanium10.1016/j.actamat.2011.03.046 ↗
30. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite10.1016/j.matdes.2017.12.016 ↗
31. Microstructures and mechanical properties of Al-Si alloy nanocomposites hybrid reinforced with nano-carbon and in-situ Al2O310.1016/j.jallcom.2019.06.030 ↗
32. Development of Cu-matrix, Al/Mn-reinforced, multilayered composites by accumulative roll bonding (ARB)10.1016/j.jallcom.2017.10.211 ↗
33. Fabrication and properties of novel porous CuAlMn shape memory alloys and polymer/CuAlMn composites10.1016/j.compositesa.2017.12.013 ↗
34. Effect of composition and ageing on damping characteristics of Cu-Al-Mn shape memory alloys10.1016/j.msea.2007.05.073 ↗
35. Evaluation of shape memory effect and damping characteristics of Cu-Al-Be-Mn shape memory alloys10.1016/j.pisc.2016.04.041 ↗
36. Aging response and its effect on the functional properties of Cu-Al-Ni shape memory alloys10.1016/j.jallcom.2006.02.094 ↗
37. Remarkable anisotropic wear resistance with 100-fold discrepancy in a copper matrix laminated composite with only 0.2 vol% graphene10.1016/j.actamat.2021.117092 ↗
38. Enhancing damping of pure magnesium using nano-size alumina particulates10.1016/j.matlet.2005.07.029 ↗
39. Thermal mismatch dislocations produced by large particles in a strain-hardening matrix10.1016/0921-5093(91)90557-4 ↗
40. Mechanical and thermodynamical properties of β-Cu-Al-Mn alloys along the Cu3Al→Cu2AlMn compositional line, Solid. State
41. Mechanical spectroscopy of thermal stress relaxation at metal-ceramic interfaces in Aluminium-based composites10.1016/S1359-6454(00)00264-0 ↗
42. On the strength of discontinuous silicon carbide reinforced aluminum composites10.1016/0036-9748(86)90210-3 ↗
43. Damping properties of 6063Al/Al2O3·SiO2 particle reinforced composites10.4028/www.scientific.net/MSF.546-549.633 ↗
44. Effect of twin boundary segregation on damping properties in magnesium alloy10.1016/j.scriptamat.2016.10.019 ↗
45. Enhanced damping capacity of magnesium alloys by tensile twin boundaries10.1016/j.scriptamat.2015.01.002 ↗
46. Damping capacity of nanotwinned copper10.1016/j.actamat.2008.04.009 ↗
47. Application of dislocation theory to internal friction phenomena at high frequencies10.1063/1.1722485 ↗
48. Microstructure and synergistic-strengthening efficiency of CNTs-SiCp dual-nano reinforcements in aluminum matrix composites10.1016/j.compositesa.2017.11.013 ↗
49. Multi-layer graphene reinforced nano-laminated WC-Co composites10.1016/j.msea.2018.03.040 ↗
50. Strengthening behavior of few-layered graphene/aluminum composites10.1016/j.carbon.2014.10.044 ↗
51. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
52. Effect of twin boundaries on indentation behavior of magnesium alloys10.1016/j.jallcom.2016.06.267 ↗
53. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
54. Microstructure, mechanical and tribological properties of nickel-aluminium bronze alloys developed via gas atomization and spark plasma sintering10.1016/j.msea.2017.09.047 ↗
55. Synthesis and properties of bulk graphene nanoplatelets consolidated by spark plasma sintering10.1016/j.carbon.2012.04.054 ↗
56. Significantly improved interfacial shear strength in graphene/copper nanocomposite via wrinkles and functionalization: a molecular dynamics study10.1016/j.carbon.2020.12.026 ↗
57. Effect of grain width and aspect ratio on mechanical properties of Si3N4 ceramics10.1007/s10853-006-0826-9 ↗
58. Preparation of graphene/copper nanocomposites by ball milling followed by pressureless vacuum sintering