Effects of stitch yarns on interlaminar shear behavior of three-dimensional stitched carbon fiber epoxy composites at room temperature and high temperature
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Yang H, Ng BC, Yu C, Liang HH, Lai W (2021) Mechanical properties study on sandwich hybrid metal/(carbon, glass) fiber reinforcement plastic composite sheet. Adv Compos Hybrid Mater 5(1):83–9010.1007/s42114-021-00213-4 ↗
2. Liu T, Fan C, Ke Z, Gao X, Fan W, Yu L (2022) A real micro-structural model to simulate the transversal compression behaviors of unidirectional composites based on the μ-CT detection. Compos Commun 10118410.1016/j.coco.2022.101184 ↗
3. Backe S, Balle F (2018) A novel short-time concept for fatigue life estimation of carbon (CFRP) and metal/carbon fiber reinforced polymer (MCFRP). Int J Fatigue 116(NOV.):317–32210.1016/j.ijfatigue.2018.06.044 ↗
4. Song W, Fan W, Liu T, Chen XG, Wang SJ, Zhao YF et al (2021) Flexural fatigue properties and failure propagation of 3D stitched composites under 3-point bending loading. Int J Fatigue 153:106507. https://doi.org/10.1016/j.ijfatigue.2021.10650710.1016/j.ijfatigue.2021.106507 ↗
5. Fan W, Dang WS, Liu T, Li JZ, Dong JJ (2019) Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending load. Mater Design 183:10811210.1016/j.matdes.2019.108112 ↗
6. Verma KK, Padmakara G, Gaddikeri KM, Ramesh S, Kumar S, Bose S (2019) The key role of thread and needle selection towards ‘through-thickness reinforcement’ in tufted carbon fiber-epoxy laminates. Compos Part B-Eng 174:8. https://doi.org/10.1016/j.compositesb.2019.10697010.1016/j.compositesb.2019.106970 ↗
7. Luinge H, Warnet LL (2020) On an application of multi-material composite laminates in the aerospace sector. Adv Compos Hybrid Mater 3(3):294–302. https://doi.org/10.1007/s42114-020-00163-310.1007/s42114-020-00163-3 ↗
8. Shanmugam L, Kazemi ME, Qiu C, Rui M, Yang J (2020) Influence of UHMWPE fiber and Ti6Al4V metal surface treatments on the low-velocity impact behavior of thermoplastic fiber metal laminates. Adv Compos Hybrid Mater 3(4):1–1410.1007/s42114-020-00189-7 ↗
9. Icardi U, Sola F (2014) Response of sandwiches undergoing static and blast pulse loading with tailoring optimization and stitching. Aerosp Sci Technol 32(1):293–30110.1016/j.ast.2013.11.001 ↗
10. Zhang K, Zheng LG, Aouraghe MA, Xu FJ (2021) Ultra-light-weight kevlar/polyimide 3D woven spacer multifunctional composites for high-gain microstrip antenna. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-021-00382-210.1007/s42114-021-00382-2 ↗
11. Zhao YL, Liu F, Zhu KJ, Maganti S, Zhao ZY, Bai PK (2022) Three-dimensional printing of the copper sulfate hybrid composites for supercapacitor electrodes with ultra-high areal and volumetric capacitances. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00430-510.1007/s42114-022-00430-5 ↗
12. Song CY, Fan W, Dong JJ, Zhao YF, Lu LL, Mi PB et al (2021) Modal analysis of 3D multi-axial hybrid composite with experimental and numerical methods. Appl Compos Mater 29(1):27–41. https://doi.org/10.1007/s10443-021-09962-310.1007/s10443-021-09962-3 ↗
13. Fan W, Zhang G, Zhang X, Dong K, Liang X, Chen WC et al (2022) Superior unidirectional water transport and mechanically stable 3D orthogonal woven fabric for human body moisture and thermal management. Small 18(10):2107150. https://doi.org/10.1002/smll.20210715010.1002/smll.202107150 ↗
14. Pingkarawat K, Mouritz AP (2015) Stitched mendable composites: balancing healing performance against mechanical performance. Compos Struct 123:54–64. https://doi.org/10.1016/j.compstruct.2014.12.03410.1016/j.compstruct.2014.12.034 ↗
15. Song CY, Fan W, Liu T, Wang SJ, Song W, Gao XZ (2022) A review on three-dimensional stitched composites and their research perspectives. Compos Part A-Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2021.10673010.1016/j.compositesa.2021.106730 ↗
16. Hui C, Wang P, Legrand X (2019) Improvement of tufting mechanism during the advanced 3-dimensional tufted composites manufacturing: to the optimisation of tufting threads degradation. Compos Struct 220:423–430. https://doi.org/10.1016/j.compstruct.2019.04.01910.1016/j.compstruct.2019.04.019 ↗
17. Guo J, Chen Z, El-Bahy ZM, Liu H, Abo-Dief HM, Abdul W et al (2022) Tunable negative dielectric properties of magnetic CoFe2O4/graphite-polypyrrole metacomposites. Adv Compos Hybrid Mater 1–8. https://doi.org/10.1007/s42114-022-00485-410.1007/s42114-022-00485-4 ↗
18. Abtew MA, Boussu F, Bruniaux P, Loghin C, Cristian I, Chen Y et al (2018) Forming characteristics and surface damages of stitched multi-layered para-aramid fabrics with various stitching parameters for soft body armour design. Compos Part A-Appl Sci Manuf 109:517–53710.1016/j.compositesa.2018.02.037 ↗
19. Nie JJ, Xu YD, Zhang LT, Yin XW, Cheng LF, Ma JQ (2008) Effect of stitch spacing on mechanical properties of carbon/silicon carbide composites. Compos Sci Technol 68(12):2425–2432. https://doi.org/10.1016/j.compscitech.2008.04.01210.1016/j.compscitech.2008.04.012 ↗
20. Bilisik K, Yolacan G (2015) Short beam strength properties of multistitched biaxial woven E-glass/polyester nano composites. J Ind Text 45(2):199–221. https://doi.org/10.1177/152808371452801710.1177/1528083714528017 ↗
21. Mouritz A (2001) Ballistic impact and explosive blast resistance of stitched composites. Compos Part B-Eng 32(5):431–43910.1016/S1359-8368(01)00015-4 ↗
22. Song B, Meng LH, Huang YD (2012) Improvement of interfacial property between PBO fibers and epoxy resin by surface grafting of polyhedral oligomeric silsesquioxanes (POSS). Appl Surf Sci 258(24):10154–1015910.1016/j.apsusc.2012.06.097 ↗
23. Guo J, Li X, Chen Z, Zhu J, Guo Z (2021) Magnetic NiFe2O4/polypyrrole nanocomposites with enhanced electromagnetic wave absorption. J Mater Sci Technol. https://doi.org/10.1016/j.jmst.2021.08.04910.1016/j.jmst.2021.08.049 ↗
24. Bourbigot S, Flambard X, Poutch F (2001) Study of the thermal degradation of high performance fibres-application to polybenzazole and p-aramid fibres. Polym Degrad Stabil 74(2):283–29010.1016/S0141-3910(01)00159-8 ↗
25. Tao Z, Hu D, Jin J, Yang S, Li G, Jiang J (2009) Improvement of surface wettability and interfacial adhesion ability of poly(p-phenylene benzobisoxazole) (PBO) fiber by incorporation of 2,5-dihydroxyterephthalic acid (DHTA). Eur Polym J 45(1):302–30710.1016/j.eurpolymj.2008.10.041 ↗
26. Ogale A, Mitschang P (2006) Effect of sewing threads on interlaminar shear strength and flexural bending strength of stitched non-crimp carbon fabric laminates. Adv Compos Lett 15(6):199–206
27. Zhao NP, Rodel H, Herzberg C, Gao SL, Krzywinski S (2009) Stitched glass/PP composite. Part I: Tensile and impact properties. Compos Part A-Appl Sci Manuf 40(5):635–643. https://doi.org/10.1016/j.compositesa.2009.02.01910.1016/j.compositesa.2009.02.019 ↗
28. Margossian A, Bel S, Balvers JM, Leutz D, Hinterhoelzl R (2014) Finite element forming simulation of locally stitched non-crimp fabrics. Compos Part A-Appl Sci Manuf 61(7):152–16210.1016/j.compositesa.2014.02.020 ↗
29. Liu Q, Wang X, Tan X, Xie X, Li Y, Zhao P et al (2018) A strategy for improving the mechanical properties of silk fiber by directly injection of ferric ions into silkworm. Mater Design 146(MAY):134–14110.1016/j.matdes.2018.03.005 ↗
30. Oshkovr SA, Eshkoor RA, Taher ST, Ariffin AK, Azhari CH (2012) Crashworthiness characteristics investigation of silk/epoxy composite square tubes. Compos Struct 94(8):2337–234210.1016/j.compstruct.2012.03.031 ↗
31. Kirmasha YK, Sharba MJ, Leman Z, Sultan MTH (2020) Mechanical performance of unstitched and silk fiber-stitched woven kenaf fiber-reinforced epoxy composites. Materials 13(21):480110.3390/ma13214801 ↗
32. Wilkinson MP, Ruggles-Wrenn MB (2017) Fatigue of a 3D orthogonal non-crimp woven polymer matrix composite at elevated temperature. Appl Compos Mater 24(6):1405–1424. https://doi.org/10.1007/s10443-017-9597-510.1007/s10443-017-9597-5 ↗
33. Uddin MN, Gandy H, Rahman MM, Asmatulu R (2019) Adhesiveless honeycomb sandwich structures of prepreg carbon fiber composites for primary structural applications. Adv Compos Hybrid Mater 2(2):339–35010.1007/s42114-019-00096-6 ↗
34. Tang ZL, Xia JS, Yin H, Fu GH, Ai XT, Tang HL et al (2021) High-temperature-resistant barium strontium titanate @Ag/poly(arylene ether nitrile) composites with enhanced dielectric performance and high mechanical strength. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-021-00366-210.1007/s42114-021-00366-2 ↗
35. Pan D, Yang G, Abo-Dief HM, Dong J, Su F, Liu C et al (2022) Vertically aligned silicon carbide nanowires/boron nitride cellulose aerogel networks enhanced thermal conductivity and electromagnetic absorbing of epoxy composites. Nano-Micro Lett. https://doi.org/10.1007/s40820-022-00863-z10.1007/s40820-022-00863-z ↗
36. Cao S, Zhis W, Wang X (2009) Tensile properties of CFRP and hybrid FRP composites at elevated temperatures. J compos Mater 43(4):315–33010.1177/0021998308099224 ↗
37. Wang P, Yang L, Gao S, Chen XL, Cao T, Wang C et al (2021) Enhanced dielectric properties of high glass transition temperature PDCPD/CNT composites by frontal ring-opening metathesis polymerization. Adv Compos Hybrid Mater 4(3):639–646. https://doi.org/10.1007/s42114-021-00287-010.1007/s42114-021-00287-0 ↗
38. Cai J, Murugadoss V, Jiang J, Gao X, Lin Z, Huang M et al (2022) Waterborne polyurethane and its nanocomposites: a mini-review for anti-corrosion coating, flame retardancy, and biomedical applications. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00473-810.1007/s42114-022-00473-8 ↗
39. Xuan JQ, Li DS, Jiang L (2019) Fabrication, properties and failure of 3D stitched carbon/epoxy composites with no stitching fibers damage. Compos Struct 220:602–607. https://doi.org/10.1016/j.compstruct.2019.03.08010.1016/j.compstruct.2019.03.080 ↗
40. Yudhanto A, Watanabe N, Iwahori Y, Hoshi H (2013) Effect of stitch density on tensile properties and damage mechanisms of stitched carbon/epoxy composites. Compos Part B-Eng 46:151–165. https://doi.org/10.1016/j.compositesb.2012.10.00310.1016/j.compositesb.2012.10.003 ↗
41. Li JZ, Fan W, Liu T, Yuan LJ, Xue LL, Dang WS et al (2020) The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites. Text Res J 90(23–24):2806–2817. https://doi.org/10.1177/004051752092700910.1177/0040517520927009 ↗
42. Yan KF, Zhang CY, Qiao SR, Li M, Han D (2011) Failure and strength of 2D-C/SiC composite under in-plane shear loading at elevated temperatures. Mater Design 32(6):3504–350810.1016/j.matdes.2011.02.054 ↗
43. Xu CH, Meng SH, Jin H, Han XX, Xie WH (2019) Modified double-notched specimen for ultra-high temperatures shear-strength testing of carbon/carbon composites. J Eur Ceram Soc 39(15):4654–4663. https://doi.org/10.1016/j.jeurceramsoc.2019.05.00210.1016/j.jeurceramsoc.2019.05.002 ↗
44. Li W, Li Q, Wang X, Lu S, Wang B (2017) The role of maleic anhydride functionalized graphene oxide in improving the interfacial properties of carbon fibre/bismaleimide composites. Polym Int 67(3):276–28210.1002/pi.5505 ↗
45. Dai Y, Meng C, Tang S, Qin J, Liu X (2019) Construction of dendritic structure by nano-SiO2 derivate grafted with hyperbranched polyamide in aramid fiber to simultaneously improve its mechanical and compressive properties. Eur Polym J 11910.1016/j.eurpolymj.2019.08.011 ↗
46. Liu TQ, Liu X, Feng P (2020) A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects. Compos Part B-Eng 191:10795810.1016/j.compositesb.2020.107958 ↗
47. Mentlík V, Prosr P, Sušír J (2009) Influence of thermal treatment on the glass transition temperature of thermosetting epoxy laminate. Polym Test. https://doi.org/10.1016/j.polymertesting.2009.03.00410.1016/j.polymertesting.2009.03.004 ↗
48. Sohn MS, Hu XZ, Kim JK (2000) Impact damage characterisation of carbon fibre/epoxy composites with multi-layer reinforcement. Compos Part B-Eng 31(8):681–69110.1016/S1359-8368(00)00028-7 ↗
49. Park JM, Kim DS, Kim SR (2003) Improvement of interfacial adhesion and nondestructive damage evaluation for plasma-treated PBO and Kevlar fibers/epoxy composites using micromechanical techniques and surface wettability. J Colloid Interf Sci 264(2):431–44510.1016/S0021-9797(03)00419-3 ↗
50. He YJ, Mei M, Yang XJ, Wei K, Qu ZL, Fang DN (2020) Experimental characterization of the compaction behavior in preforming process for 3D stitched carbon fabric. Compos Commun 19:203–209. https://doi.org/10.1016/j.coco.2020.04.00510.1016/j.coco.2020.04.005 ↗