Synthesis of novel hard mesoporous carbons and their applications as anodes for Li and Na ion batteries
Source abstract
Abstract
Abstract Mesoporous-microporous carbons, were obtained from the pyrolysis of resol polymerized in the presence of tetraethoxysilane (TEOS) and the triblock copolymer PEO140-PPO39-PEO140 (F108). Carbons Cx-y (x = TEOS/F108 M ratio; y = synthesis temperature) exhibit interconnected porosity measured by N2 adsorption with high BET area and micro-mesoporous volume. According to this information and that obtained by Raman, XRD and CO2 adsorption, the carbons are described as hard carbons. As conductive additive-free anodes for Li- ion coin cells (LIBs), the carbons Cx-y present high initial specific capacity, being the highest for C70-100 (670 mAh/g) with high capacity retention: 500 mAh/g at 27 mA/g, 68 cycles and rate capability: 100 mAh/g at 1365 mA/g, 56 cycles. The C70-100 improved efficiency is attributed to the highest mesoporosity and lowest non-graphitizing hard carbon nature and surface activity. As anodes for Na-ion batteries (NIBs), these carbons present higher first discharge capacities ∼ 780-420 mAh/g and initial capacity, ∼192-109 mAh/g, than graphite. C90-150 with the lowest irreversible capacity is promising anode for NIBs. This result is due to its higher hard carbon nature and surface activity than C70-100 and lower porosity than C70-100 and C90-100, allowing more stability in carbon-sodium intercalation and less electrolyte decomposition, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
2. Electrochemical performance of highly mesoporous nitrogen doped carbon cathode in lithium–oxygen batteries10.1016/j.jpowsour.2010.11.112 ↗
3. Improved graphite anode for lithium-ion batteries chemically—bonded solid electrolyte interface and nanochannel formation10.1149/1.1836372 ↗
4. The development and future of lithium ion batteries10.1149/2.0251701jes ↗
5. The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling10.1016/j.carbon.2016.04.008 ↗
6. Mechanism of self-discharge in graphite-lithium anode10.1016/S0013-4686(01)00827-1 ↗
7. Surface chemistry and lithium storage capability of the graphite lithium electrode10.1016/S0013-4686(99)00195-4 ↗
8. Carbon nanofiber-based nanostructures for lithium-ion and sodium-ion batteries10.1039/C7TA02153D ↗
9. Three-Dimensional carbon nanostructures for advanced lithium-ion batteries
10. Hierarchical graphene-containing carbon nanofibers for lithium-ion battery anodes10.1021/acsami.5b10069 ↗
11. Hierarchical mesoporous/microporous carbon with graphitized frameworks for high-performance lithium-ion batteries10.1063/1.4897201 ↗
12. Organic aerogels from the polycondensation of resorcinol with formaldehyde10.1007/BF01139044 ↗
13. Influence of drying on the morphology of resorcinol-formaldehyde-based carbon gels10.1016/j.micromeso.2005.07.021 ↗
14. Origin of porosity in resorcinol-formaldehyde aerogels10.1016/0022-3093(95)00043-7 ↗
15. Review—hard carbon negative electrode materials for sodium-ion batteries10.1149/2.0091514jes ↗
16. Mechanism of lithium insertion in hard carbons prepared by pyrolysis of epoxy resins10.1016/0008-6223(96)00177-7 ↗
17. Lithium insertion in hydrogen-containing carbonaceous material10.1021/cm950304y ↗
18. Ordered mesoporous carbon and its applications for electrochemical energy storage and conversion10.1039/C6QM00298F ↗
19. MOF-derived microporous carbon as a better choice for Na-ion batteries than mesoporous CMK-310.1039/C4RA11009A ↗
20. A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries10.1016/j.nanoen.2014.11.025 ↗
21. Morphology-dependent Li storage performance of ordered mesoporous carbon as anode material10.1021/la401150t ↗
22. An aqueous cooperative assembly route to synthesize ordered mesoporous carbons with controlled structures and morphology10.1021/cm061400+ ↗
23. Bio-derived, binder less, hierarchically porous carbon anodes for Li-ion batteries10.1038/srep14575 ↗
24. Aqueous and organic inks of carbon xerogels as models for studying the role of porosity in lithium-ion battery electrodes10.1016/j.matdes.2016.07.007 ↗
25. Pore-structure-optimized CNT-carbon nanofibers from starch for rechargeable lithium batteries10.3390/ma9120995 ↗
26. Mesoporous carbon materials: synthesis and modification10.1002/anie.200702046 ↗
27. Triconstituent Co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas10.1021/ja0633518 ↗
28. Electrochemical properties of an ordered mesoporous carbon prepared by direct tri-constituent co-assembly10.1016/j.carbon.2007.08.005 ↗
29. Ordered mesoporous polymers and homologous carbon frameworks: amphiphilic surfactant templating and direct transformation10.1002/anie.200501561 ↗
30. Synthesis of texturally biphasic mesoporous carbon-silica composites and carbons10.1016/j.micromeso.2013.01.033 ↗
31. Binder free hierarchical mesoporous carbon foam for high performance lithium ion battery10.1038/s41598-017-01638-y ↗
32. Chemical intercalation of solvated sodium ions in graphite10.1016/j.electacta.2016.11.112 ↗
33. Why is sodium-intercalated graphite unstable?10.1039/C7RA06777A ↗
34. Cohesion and structure graphite intercalation compounds10.1103/PhysRevB.32.2538 ↗
35. Micro-nano structure hard carbon as a high performance anode material for sodium-ion batteries10.1038/srep35620 ↗
36. Room-temperature sodium-ion batteries: improving the rate capability of carbon anode materials by templating strategies10.1039/c1ee01744f ↗
37. High capacity anode materials for rechargeable sodium-ion batteries10.1149/1.1393348 ↗
38. Mesoporous soft carbon as an anode material for sodium ion batteries with superior rate and cycling performance10.1039/C6TA00950F ↗
39. Improved performance of LiFePO4 cathode for Li-ion batteries through percolation studies10.1016/j.electacta.2017.06.172 ↗
40. A standard adsorption isotherm for the characterization of activated carbons10.1021/j100287a006 ↗
41. Pore size distribution of carbon with different probe molecules10.4186/ej.2010.14.3.45 ↗
42. Structural characterization of graphene layers in various Indian coals by X-Ray diffraction10.1088/1757-899X/73/1/012096 ↗
43. General equation for the determination of the crystallite size La of nanographite by Raman spectroscopy10.1063/1.2196057 ↗
44. Evolution of carbon microstructures during the pyrolysis of Turkish elbistan lignite in the temperature range 700−1000 °C10.1021/ef0301809 ↗
45. Mechanisms for lithium insertion in carbonaceous materials10.1126/science.270.5236.590 ↗
46. Winter · 2011
47. Important role of functional groups for sodium ion intercalation in expanded graphite10.1021/acs.chemmater.5b02024 ↗
48. Reconsideration of SEI stability: reversible lithium intercalation into graphite electrodes in trans-2, 3-butylene carbonate10.1016/S0378-7753(01)00843-6 ↗
49. Origin of excess irreversible capacity in lithium-ion batteries based on carbon nanostructures10.1149/2.0591510jes ↗
50. High-density sodium and lithium ion battery anodes from banana peel10.1021/nn502045y ↗
51. Origin of non-SEI related Coulombic efficiency loss in carbons tested against Na and Li10.1039/C4TA04995K ↗
52. MOF-derived microporous carbon as a better choice for Na-ion batteries than mesoporous CMK-310.1039/C4RA11009A ↗
53. Studies on LiFePO4 as cathode material using impedance spectroscopy10.1016/j.jpowsour.2010.09.121 ↗
54. Separation of charge transfer and contact resistance in LiFePO4-cathodes by impedance modeling10.1149/2.030207jes ↗
55. A study of electrochemical performance of LiFePO4/C composites doped with Na and V10.1016/S1452-3981(23)17981-8 ↗
56. Activated carbon aerogels with developed mesoporosity as high-rate anodes in lithium-ion batteries10.1007/s10853-016-9861-3 ↗
57. Recent progress in design of biomass-derived hard carbons for sodium ion batteries
58. Important role of functional groups for sodium ion intercalation in expanded graphite10.1021/acs.chemmater.5b02024 ↗
59. Synthesis of hard carbons from argan shell for Na-ion batteries
60. Influence of solvent evaporation rate in the preparation of carbon-coated lithium iron phosphate cathode films on battery performance10.1002/ente.201500392 ↗
61. Electroactive phases of poly(vinylidene fluoride): determination, processing and applications10.1016/j.progpolymsci.2013.07.006 ↗
62. Binder migration during drying of lithium-ion battery electrodes: modelling and comparison to experiment10.1016/j.jpowsour.2018.04.097 ↗