Ultrahigh-shear processing for the preparation of polymer/carbon nanotube composites

Abstract Poly(vinylidene fluoride) (PVDF)/multiwalled carbon nanotube (MWCNT) composites were prepared using a novel ultrahigh-shear extruder by directly mixing MWCNT with PVDF in the molten state. A special feedback-type screw was used to obtain a high shear field and obtain a very uniform dispersion of the nanotubes in the polymer matrix under a higher screw rotation speed. Raman spectroscopy and scanning electron microscopy were used to determine the interaction and dispersion of nanotubes in the PVDF. The linear viscoelastic behavior and electrical conductivity of these composites were investigated. At low-frequencies, the storage shear modulus (G′) becomes almost independent of the frequency as nanotube loading increases, suggesting the onset of solid-like behavior in these composites. By plotting G′ vs. nanotube loading and fitting with a power-law function, we found that the rheological threshold of high-shear processed composites is about 0.96 wt% whereas that of low-shear processed composites is about 1.76 wt%. The electrical percolation threshold of high-shear processed composites is lower than that of low-shear processed composites.