journal article·2004

Fabrication of carbon membranes for gas separation––a review

S.M Saufi, A.F Ismail

Carbon· Volume 42· Issue 2
Publisher page

Abstract

Carbon membrane materials are becoming more important in the new era of membrane technology for gas separation due to their higher selectivity, permeability and stability in corrosive and high temperature operations. Carbon membranes can be produced by pyrolysis of a suitable polymeric precursor under controlled conditions. This paper reviews the fabrication aspects of carbon membranes, which can be divided into six steps: precursor selection, polymeric membrane preparation, pretreatment of the precursor, pyrolysis process, post-treatment of pyrolyzed membranes and module construction. The manipulation of the pretreatment variables, pyrolysis process parameters and post-treatment conditions were shown to provide an opportunity to enhance the separation performance of carbon membranes in the future. By understanding the available methods, one can choose and optimize the best technique during the fabrication of carbon membranes. Furthermore, areas of future potential in carbon membrane research for gas separation were also briefly identified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Membrane Separation and Gas Transport · Graphene research and applications · Muon and positron interactions and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Review: polymers for gas separations: the next decade10.1016/0376-7388(94)00141-3 ↗
2. Soffer A, Rosen D, Saguee S, Koresh J. Carbon membranes. GB patent 2207666, 1989
3. Donnet · 1984
4. Gas permeation properties of asymmetric carbon hollow fiber membranes prepared from asymmetric hollow fiber10.1016/S0376-7388(99)00082-4 ↗
5. Influence of the thermostabilization process and soak time during pyrolysis process on the polyacrylonitrile carbon membranes for O2/N2 separation10.1016/S0376-7388(02)00513-6 ↗
6. Preparation of supported asymmetric carbon molecular sieve membranes10.1016/S0376-7388(98)00037-4 ↗
7. Soffer A, Gilron J, Cohen H. Separation of linear from branched hydrocarbons using a carbon membrane. US patent 5914434, 1999
8. Pore size control of carbonized BPTA-pp′ODA polyimide membrane by chemical vapor deposition of carbon10.1016/S0376-7388(96)00250-5 ↗
9. On the preparation of supported nanoporous carbon membranes10.1016/S0376-7388(00)00513-5 ↗
10. Preparation of carbon molecular sieve membrane and diffusion of binary mixtures in the membrane10.1021/ie00036a033 ↗
11. Characterization of ultramicroporous carbon membranes with humidified feeds10.1021/ie00040a014 ↗
12. Hydration of propene using a porous carbon membrane contactor10.1016/S0958-2118(00)80193-7 ↗
13. Suda · J. Chem. Soc. Chem. Commun. · 1995 · 117910.1039/c39950001179 ↗
14. Control pore in carbon10.1016/S0008-6223(99)00142-6 ↗
15. Preparation of supported carbon molecular sieve membrane10.1016/S0008-6223(98)00244-9 ↗
16. Carbon molecular sieve membranes from polyetherimide10.1016/S1387-1811(98)00204-2 ↗
17. A review on the latest development of carbon membranes for gas separation10.1016/S0376-7388(01)00510-5 ↗
18. Development and characterization of polyacrylonitrile (PAN) based carbon hollow fiber membrane
19. Preparation of carbon molecular sieve membrane from phenol–formaldehyde novolac resin10.1016/S0008-6223(01)00306-2 ↗
20. Schindler E, Maier F. Manufacture of porous carbon membranes.US patent 4919860, 1990
21. Gas permeation through micropores of carbon molecular sieve membranes derived from kapton polyimide10.1021/jp963997u ↗
22. Carbon membrane for gas separation derived from coal tar pitch10.1016/S0008-6223(98)00334-0 ↗
23. Study of molecular sieve carbons, part 1––pore structure, gradual pore opening and mechanism of molecular sieving10.1039/f19807602457 ↗
24. Morthon-Jones · 1984
25. Comparative adsorption study on carbons from polymer precursors10.1016/S0008-6223(00)00038-5 ↗
26. Transport and morphological characteristics of polyetherimide-based carbon molecular sieve membranes10.1021/ie9806592 ↗
27. Koros WJ, Jones CW. Composite carbon fluid membranes. US patent 5288304, 199410.1016/0008-6223(94)90135-X ↗
28. Chen JC. Modification of polyacrylonitrile (PAN) precursor fiber via post-spinning plasticization and stretching. The Pennsylvania State University, PhD thesis, 1998
29. Experiments and simulation of transport and separation of gas mixtures in carbon molecular sieves membranes10.1021/jp982075j ↗
30. Highly asymmetrical carbon membranes10.1016/0376-7388(94)85032-1 ↗
31. Carbon membranes from precursors containing low-carbon residual polymers10.1002/pi.1994.210350304 ↗
32. Geiszler VC. Polyimide precursors for carbon membranes. University of Texas, PhD thesis, 1997
33. Carbon molecular sieve gas separation membranes I––preparation and characterization based on polyimide precursors10.1016/0008-6223(94)90135-X ↗
34. High pressure CO2/CH4 separation using carbon molecular sieve hollow fiber membranes10.1021/ie010119w ↗
35. Gas permeation through carbonized hollow fiber membranes prepared by gel modification of polyamic acid10.1016/S0376-7388(99)00140-4 ↗
36. Carbon molecular sieve membrane formed by oxidative carbonization of a copolyimide film coated on a porous support tube10.1016/S0376-7388(97)00100-2 ↗
37. Simultaneous improvement of permeance and permselectivity of 3,3′4, 4′-biphenyltetracarboxylic dianhydride-4,4′-oxydianiline polyimide membrane by carbonization10.1021/ie00039a028 ↗
38. Mesoporous carbon membranes from polyimide blended with poly(ethyleneglycol)10.1002/1097-4628(20010131)79:5<836::AID-APP80>3.0.CO;2-1 ↗
39. Supported carbon molecular sieve membranes based on phenolic resin10.1016/S0376-7388(99)00083-6 ↗
40. Carbon composite membranes from matrimid and kapton polyimide10.1016/S1387-1811(99)00129-8 ↗
41. Steel KM. Carbon membranes for challenging gas separations, University of Texas, PhD thesis, 2000
42. Formation of defect-free polyimide hollow fiber membranes for gas separations10.1016/S0376-7388(99)00276-8 ↗
43. Acharya M. Engineering design and theoretical analysis of nanoporous carbon membranes for gas separation, University of Delaware, PhD thesis, 199910.1016/S0376-7388(99)00173-8 ↗
44. Carbon molecular sieve membranes derived from a phenolic resin supported on porous ceramic tubes10.1016/S1383-5866(01)00065-X ↗
45. Carbon molecular sieve membranes derived from phenolic resin with a pendant sulfonic acid group10.1021/ie010402v ↗
46. Gas permselectivity of carbonized polypyrrolone membrane10.1039/a700048k ↗
47. Koros WJ, Vu, DQ. High carbon filamentary membrane and method making the same. US patent application 2002033096, 200210.1021/ie010119w ↗
48. Preparation of carbon hollow fiber membranes by pyrolysis of polyetherimide10.1016/S0008-6223(03)00129-5 ↗
49. Fabrication of hollow fiber gas separation membranes10.1016/0950-4214(90)80024-F ↗
50. Preparation of hollow-fibre composite carbon–zeolite membranes10.1016/0927-6513(95)00023-3 ↗
51. Ultrasonic deposition of high-selectivity nanoporous carbon membranes10.1126/science.285.5435.1902 ↗
52. Spray-coating of nanoporous carbon membranes for air separation10.1016/S0376-7388(99)00173-8 ↗
53. Carbon membrane-based catalysts for hydrogenation of CO10.1007/BF00806982 ↗
54. Capillary carbon molecular sieve membranes derived from kapton for high temperature gas separation10.1016/S0376-7388(97)00041-0 ↗
55. Linkov · Mater. Lett. · 1994 · 20 · 4310.1016/0167-577X(94)90146-5 ↗
56. Future directions of membrane gas separation technology10.1021/ie0108088 ↗
57. Gas permeation properties and characterization of asymmetric carbon membranes prepared by pyrolyzing asymmetric polyimide hollow fiber membrane10.1016/S0376-7388(97)00118-X ↗
58. Tanihara N, Kusuki Y. Membrane and process for its preparation. EP patent 1034836, 2000
59. Yoneyama H, Nishihara Y. Porous hollow carbon fiber film and method of manufacturing the same. EP patent 0394449, 1990
60. Gupta · JMS-Rev. Macromol. Chem. Phys. · 1991 · C31 · 1
61. Soffer A, Gilron J, Saguee S, Hed-Ofek R, Cohen H. Process for the production of hollow carbon fiber membranes. European patent 0671202, 1995
62. Effect of polyimide pyrolysis conditions on carbon molecular sieve membrane properties10.1021/ie950746j ↗
63. Aging of carbon membranes under different environments10.1016/S0008-6223(00)00188-3 ↗
64. Air separation properties of flat sheet homogeneous pyrolytic carbon membranes10.1016/S0376-7388(00)00392-6 ↗
65. Carbon molecular sieve membranes prepared from porous fiber precursor10.1016/S0376-7388(02)00117-5 ↗
66. Composites membranes from perfluoro-sulfonated ionomer on carbon and ceramic supports10.1016/0167-577X(95)00078-X ↗
67. Soffer A, Azariah A, Amar A, Cohem H, Golub D, Saguee S, et al. Method of improving the selectivity of carbon membranes by chemical vapor deposition. US patent 5695818, 1997
68. Soffer A, Koresh J, Saggy S. Separation device. US patent 4685940, 198710.1080/01496398708068993 ↗
69. Gas permeation and micropore structure of carbon molecular sieving membranes modified by oxidation10.1016/S0376-7388(98)00156-2 ↗
70. Effect of air oxidation on gas separation properties of adsorption-selective carbon membranes10.1016/S0008-6223(00)00168-8 ↗
71. Preparation of carbon molecular sieves I. Two-step hydrocarbon deposition with a single hydrocarbon10.1016/0008-6223(93)90200-T ↗
72. Preparation of carbon molecular sieves by propylene pyrolysis over microporous carbons10.1016/0008-6223(92)90003-F ↗
73. Chihara · Carbon · 1979 · 17 · 33910.1016/0008-6223(79)90006-X ↗
74. High pressure gas permeability of microporous carbon membranes10.1016/S0927-6513(96)00080-6 ↗
75. Shiflett MB. Synthesis, characterization and application of nanoporous carbon membranes, University of Delaware, PhD thesis, 2002
76. Carbon composite membranes:a solution to adverse humidity effects10.1021/ie00040a015 ↗
77. Membrane processes for sustainable industrial growth10.1016/S0958-2118(00)80021-X ↗
78. Future directions of membrane gas-separation technology10.1016/S0958-2118(01)80332-3 ↗
79. Yoneyama H, Nishihara Y. Carbon based porous hollow fiber membrane and method for producing same. US patent 5089135, 1992
80. David LIB. Development of asymmetric polyacrylonitrile carbon hollow fiber membrane for oxygen/nitrogen gas separation, Universiti Teknologi Malaysia, MSc Thesis, 2001
81. Knudsen diffusion in microporous carbon membranes with molecular sieving character10.1016/S0376-7388(02)00074-1 ↗
82. Carbon molecular sieving membranes derived from condensed polynuclear aromatic (COPNA) resins for gas separation10.1021/ie9804024 ↗
83. Carbon molecular sieve films from polyimide10.1016/0008-6223(92)90192-Y ↗
84. Preparation of macroporous carbon films from polyimide by phase inversion method10.1016/0008-6223(92)90094-D ↗
85. Carbon molecular sieve films from polyimide10.1016/0008-6223(92)90095-E ↗
86. Alkene/alkane permselectivities of a carbon molecular sieve membrane10.1039/a606385c ↗
87. Neutron diffraction study of adsorbed CO2 on a carbon membrane10.1016/S0921-4526(99)01582-3 ↗
88. Asymmetric molecular sieve carbon membranes10.1016/0376-7388(95)00205-7 ↗
89. On the structure of an asymmetric carbon membrane with a novolac resin precursor10.1002/(SICI)1097-4628(19970620)64:12<2323::AID-APP8>3.0.CO;2-N ↗
90. Preparation of porous carbon membrane plates for pervaporation separation applications10.1016/S1383-5866(99)00019-2 ↗
91. Clint JH, Lear AM, Oliver LF, Tennison SR. Membranes. EP patent 0474424, 1992
92. Adsorption-selective carbon membrane for gas separation10.1016/S0376-7388(00)00458-0 ↗
93. Separation of hydrocarbon gas mixtures using phenolic resin-based carbon membranes10.1016/S1383-5866(02)00006-0 ↗
94. Synthesis and permeation properties of silicon–carbon-based inorganic membrane for gas separation10.1021/ie000009+ ↗
95. Nanoporous carbon membranes for separation of gas mixtures by selective surface flow10.1016/0376-7388(93)85279-6 ↗
96. Rao MB, Sircar S, Golden TC. Gas separation by adsorbent membranes. US patent 5104425, 1992
97. Performance and pore characterization of nanoporous carbon membrane for gas separation10.1016/0376-7388(95)00241-3 ↗
98. Separation of hydrogen sulfide-methane mixtures by selective surface flow membrane10.1016/S1383-5866(98)00089-6 ↗
99. Carbon molecular sieve gas separation membranes based on poly(vinylidene chloride-co-vinyl chloride)10.1016/S0008-6223(99)00214-6 ↗
100. Structural characterization of polyetherimide-based carbon molecular sieve membranes10.1002/aic.690461116 ↗