Experimental investigation and CALPHAD modeling of the Cu–Cr–Si ternary system
Source abstract
Abstract
Abstract The phase equilibria of the Cu–Cr–Si ternary system were investigated via thermodynamic modeling coupled with key experiments. Seventeen ternary alloys were prepared to determine the isothermal sections of the Cu–Cr–Si system at 700 and 800 °C by combining X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS). No ternary compound was found. The solubilities of the third element in binary compounds in the Cu–Si and Cr–Si systems were measured. Based on the thermodynamic descriptions of three constitutive binary systems available in the literature as well as the experimental phase equilibria data obtained from the present work and literature, thermodynamic re-assessment of the Cu–Cr–Si system was carried out by the CALPHAD (CALculation of PHAse Diagrams) approach. The substitutional model and sublattice model were used to describe the solution phases and intermediate phases, respectively. A set of thermodynamic parameters of the Cu–Cr–Si system was obtained. The calculated isothermal sections and vertical section are in good agreement with most of the reliable experimental data. The liquidus projection and reaction scheme of the Cu–Cr–Si system over the whole composition were also presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Effects of non-isothermal aging on mechanical properties, corrosion behavior and microstructures of Al–Cu–Mg–Si alloy10.1016/j.jallcom.2019.152960 ↗
2. Optimizing the strength, ductility and electrical conductivity of a Cu–Cr–Zr alloy by rotary swaging and aging treatment10.1016/j.msea.2019.01.002 ↗
3. Study on the hot deformation behavior and microstructure evolution of Cu–Cr–In alloy10.1007/s11665-019-03961-z ↗
4. Experimental and numerical investigation on the phase separation affected by cooling rates and marangoni convection in Cu–Cr alloys10.1007/s11661-015-2745-3 ↗
5. Effect of Ag addition on the microstructure and mechanical properties of Cu–Cr alloy10.1016/j.msea.2018.04.077 ↗
6. Microstructural evolution and properties of a Cu–Cr–Ag alloy during continuous manufacturing process
7. Phase equilibria in the system Ag–Cu–Si10.1007/s11669-020-00781-w ↗
8. A new thermodynamic database for multicomponent Cu alloys
9. The phase equilibria of the Cu–Cr–Ni and Cu–Cr–Ag systems: experimental investigation and thermodynamic modeling10.1016/j.calphad.2019.101734 ↗
10. Experimental investigation and thermodynamic modeling of the Cu–Ag–Si ternary system10.1016/j.jct.2020.106172 ↗
11. Experimental investigation and thermodynamic modeling of the phase equilibria in the Cu–Nb–Ni ternary system10.1007/s11669-021-00866-0 ↗
12. Liu · 2016
13. Lukas · 2007
14. Villars · 1991
15. Experimental investigation of the Cu-Si phase diagram at x(Cu)>0.7210.1016/j.intermet.2011.05.017 ↗
16. The Cu-Si (copper-silicon) system10.1007/BF02881559 ↗
17. A thermodynamic analysis of the Cu–Si System10.1016/S0925-8388(00)00983-X ↗
18. Thermodynamic modeling of the Cu–Fe–Cr and Cu–Fe–Mn systems10.1016/j.calphad.2017.01.004 ↗
19. FactSage thermochemical software and databases10.1016/S0364-5916(02)00035-4 ↗
20. Thermodynamic analysis of stable and metastable equilibria in the Cu–Cr system10.1016/0364-5916(95)00010-C ↗
21. Experimental investigation and thermodynamic description of the Cu–Cr–Zr system10.1016/j.calphad.2017.07.002 ↗
22. Assessment of the Cr–Si system10.1016/0364-5916(94)90023-X ↗
23. Experimental reinvestigation of the CrSi–Si partial system and update of the thermodynamic description of the entire Cr–Si system10.1361/105497100770340066 ↗
24. Standard enthalpies of formation of some 3d transition metal silicides by high temperature direct synthesis calorimetry10.1016/S0925-8388(97)00528-8 ↗
25. On the melting of Cr5Si3 and update of the thermodynamic description of Cr–Si10.1016/j.calphad.2008.05.005 ↗
26. The Cu–Cr–Si system
27. Influence of copper on the structure and superconducting properrties of transition metals
28. Thermodynamic (Cr, Mo, Nb, Ta, V, or W)–Si–Cu ternary systems10.1557/JMR.1992.2424 ↗
29. The wetting of silicon nitride by chromiun-containning alloys10.1007/BF01151505 ↗
30. Microstructure and wear resistance of Cuss-toughened Cr5Si3/CrSi metal silicide alloys10.1557/JMR.2005.0174 ↗
31. Influence of zirconia promoter on catalytic properties of Cu–Cr–Si catalysts for methanol synthesis at high CO conversion in slurry phase10.1007/s10562-006-0027-9 ↗
32. Thermodynamics and kinetics in liquid immiscible Cu–Cr–Si ternary system10.1016/j.matchemphys.2010.11.033 ↗
33. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
34. Thermodynamics of nonelectrolyte solutions x–y–t relations in a binary system
35. Regular-solution model for stoichiometric phases and ionic melts10.3891/acta.chem.scand.24-3618 ↗
36. A regular solution model for phases with several components and sublattices suitable for computer applications10.1016/0022-3697(81)90144-X ↗
37. Pearson's handbook of crystallographic data for intermetallic phases
38. The thermo-calc databank system10.1016/0364-5916(85)90021-5 ↗
39. The phase equilibria of the Ti–V–M (M = Si, Nb, Ta) ternary systems10.1016/j.intermet.2020.106701 ↗
40. CALPHAD-type thermodynamic description of the phase equilibria in the Ti–W–M (M = Zr, Mo, Nb) ternary systems10.1016/j.jct.2018.10.024 ↗
41. CALPHAD-type thermodynamic modeling of the Ti–W–B and Ti–W–Si refractory systems10.1016/j.ijrmhm.2019.02.013 ↗