Binary Ti–Fe system. Part II: Modelling of pressure-dependent phase stabilities
Source abstract
Abstract
Based on the experimental and calculated data from literature, the thermodynamic assessment of the binary Ti–Fe system under hydrostatic pressure was performed. The pressure-independent part of the Gibbs energy was modelled using the heat capacity data. The description of the pressure-dependent part of the Gibbs energy was based on the molar volume, thermal expansion and bulk modulus data, and on their pressure derivatives. Using the Murnaghan equation of state, the binary phase stabilities in the Ti–Fe system were assessed to reproduce the experimental results in the pressure range between 2.3 and 2.7 GPa. The thermodynamic functions were converted into the parameters of a phenomenological pressure model, which is implemented in the Thermo-Calc software. The reliability of the assessment is illustrated on the unary systems Ti and Fe containing high-temperature and high-pressure phases, and on the binary Ti–Fe system containing intermetallic phases TiFe and TiFe2 in addition to the terminal solid solutions. It is shown that the calculation of the T0 lines can help in understanding the formation of α′-Ti(Fe) martensite and the high-pressure phase ω-Ti and its metastability at atmospheric pressure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Critical evaluation of the Fe–Ni, Fe–Ti and Fe–Ni–Ti alloy systems10.1016/j.intermet.2005.11.028 ↗
2. Lütjering · 2007
3. Evaluation of mechanical and wear properties of TixNb7Fe alloys designed for biomedical applications10.1016/j.matdes.2016.09.029 ↗
4. Biocompatibility of new low-cost (α + β)-type Ti−Mo−Fe alloys for long-term implantation10.1016/j.msec.2019.01.133 ↗
5. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
6. A panoramic overview of hydrogen storage alloys from a gas reaction point of view10.1016/S0925-8388(99)00384-9 ↗
7. An overview on TiFe intermetallic for solid-state hydrogen storage: microstructure, hydrogenation and fabrication processes
8. High-pressure torsion for new hydrogen storage materials10.1080/14686996.2018.1435131 ↗
9. Hydrogen storage performance of TiFe after processing by ball milling10.1016/j.actamat.2014.12.052 ↗
10. Phase transformations in Ti–Fe alloys induced by high-pressure torsion10.1002/adem.201500143 ↗
11. The α→ω and β→ω phase transformations in Ti–Fe alloys under high-pressure torsion10.1016/j.actamat.2017.10.051 ↗
12. Transformation pathway upon heating of Ti–Fe alloys deformed by high-pressure torsion10.1002/adem.201700933 ↗
13. The compressibility of media under extreme pressures10.1073/pnas.30.9.244 ↗
14. Implementation of a new model for pressure dependence of condensed phases in Thermo-Calc10.1016/j.calphad.2005.04.001 ↗
15. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
16. Application of CALPHAD to high pressures10.1016/j.calphad.2006.12.008 ↗
17. Including the effects of pressure and stress in thermodynamic functions10.1002/pssb.201350156 ↗
18. 1987
19. Low temperature heat capacities of inorganic solids. XVII. Heat capacity of titanium from 15 to 305°K.110.1021/ja01109a017 ↗
20. The heat capacity of Ti, V and Cr10.1088/0305-4608/12/6/009 ↗
21. Thermal and electrical properties of titanium between 300 and 1900 K10.1023/A:1013151303111 ↗
22. Density-functional study of the thermodynamic properties and the pressure–temperature phase diagram of Ti10.1103/PhysRevB.80.104116 ↗
23. Finite elastic strain of cubic crystals10.1103/PhysRev.71.809 ↗
24. The measurement of the lattice expansions and Debye temperatures of titanium and silver by X-ray methods10.1088/0370-1328/74/5/314 ↗
25. Crystal structure and thermal expansion of scandium, titanium, vanadium and manganese
26. Preferred orientation and anisotropy in titanium10.1016/0022-5088(62)90004-8 ↗
27. Vacuum X‐ray diffractometer for high temperature studies of metals sensitive to contamination by oxygen and nitrogen10.1063/1.1717685 ↗
28. The lattice constants of high purity alpha titanium10.1088/0370-1328/80/3/323 ↗
29. The anisotropy of the thermal expansion of α-titanium10.1107/S0567739468000525 ↗
30. Hydrogen-induced expansions in titanium-aluminum alloys
31. Influence of the distribution of the interstitial oxygen atoms on the lattice parameters in dilute H.C.P. titanium-oxygen solid solutions (90–4000 ppm at)10.1016/0036-9748(77)90243-5 ↗
32. Accurate determination of the lattice of beta-titanium at 900° C10.1038/166960a0 ↗
33. Effect of temperature and hydrogen concentration on the lattice parameter of beta titanium10.1016/S0025-5408(01)00604-3 ↗
34. Metastable phases in the Ti-V system: Part I. Neutron diffraction study and assessment of structural properties10.1007/s11661-002-0057-x ↗
35. Assessments of molar volume and thermal expansion for selected bcc, fcc and hcp metallic elements10.1016/j.calphad.2005.05.001 ↗
36. Thermodynamic properties of titanium from ab initio calculations10.1088/2053-1591/2/1/016505 ↗
37. Density and structure of undercooled liquid titanium10.1007/s11434-011-4945-6 ↗
38. Non-contact measurements of thermophysical properties of titanium at high temperature10.1006/jcht.1999.0576 ↗
39. Experiments in materials science on the ground and in reduced gravity using electrostatic levitators10.1016/j.asr.2007.06.032 ↗
40. Special issue on microstructures and textures of films and coatings in electronic applications -thermophysical properties of molten refractory metals measured by an electrostatic levitator10.1007/s11664-005-0160-z ↗
41. Gale · 2004
42. Thermal expansion of titanium10.6028/jres.030.008 ↗
43. Kirby · 1972
44. Touloukian · 1975
45. Pressure-induced transition in titanium metal: a systematic study of the effects of uniaxial stress10.1016/j.physb.2004.10.030 ↗
46. Crystal structures of Ti under high pressure: theory10.1103/PhysRevB.67.132102 ↗
47. Novel gamma-phase of titanium metal at megabar pressures10.1103/PhysRevLett.86.3068 ↗
48. Thermal equations of state for titanium obtained by high pressure—temperature diffraction studies
49. High pressure-temperature phase diagram and equation of state of titanium10.1103/PhysRevB.91.134108 ↗
50. Comparison of mechanical and thermodynamic properties of fcc and bcc titanium under high pressure
51. Titanium's high-temperature elastic constants through the hcp–bcc phase transformation10.1016/j.actamat.2004.01.002 ↗
52. Single-crystal elastic moduli and the hcp → bcc transformation in Ti, Zr, and Hf10.1103/PhysRev.135.A482 ↗
53. Theoretical investigation of the high pressure structure, lattice dynamics, phase transition, and thermal equation of state of titanium metal10.1063/1.3407560 ↗
54. Classical potential describes martensitic phase transformations between the α, β, and ω titanium phases10.1103/PhysRevB.78.054121 ↗
55. Young · 1991
56. Experimental constraints on the phase diagram of titanium metal10.1016/j.jpcs.2008.05.016 ↗
57. Systematics of transition-metal melting10.1103/PhysRevB.63.132104 ↗
58. High-pressure melting curve of titanium10.1103/PhysRevB.92.224110 ↗
59. X‐ray diffraction of γ‐Fe at high temperatures and pressures10.1063/1.342908 ↗
60. The melting of iron up to 200 kbar10.1029/JB080i026p03777 ↗
61. The iron fusion curve and γ-δ-l triple point10.1007/BF02644272 ↗
62. Phase diagram of iron by in situ X-ray diffraction: implications for earth's core10.1126/science.270.5241.1473 ↗
63. Thermodynamics of iron phases at high pressures and temperatures
64. Melting and crystal structure of iron at high pressures and temperatures10.1029/97GL03776 ↗
65. Experimental phase relations of iron to 360 kbar, 1400°C, Determined in an internally heated diamond‐anvil apparatus
66. Pressure—temperature phase diagram of iron to 200 kbar, 900 C10.1063/1.1714038 ↗
67. Temperature dependence of shock‐induced phase transformations in iron10.1063/1.1702465 ↗
68. The lattice stability of metals—III10.1016/0001-6160(63)90157-3 ↗
69. Kennedy · 1963 · 163
70. Coupled phase diagrams and thermochemical data for transition metal binary systems — I10.1016/0364-5916(78)90005-6 ↗
71. A thermodynamic assessment of the Fe-N-Ti system10.1016/0364-5916(91)90024-E ↗
72. Thermodynamic reassessment and calculation of Fe−Ti phase diagram10.1016/0364-5916(94)90028-0 ↗
73. Assessment of the Fe-Ti system10.1007/s11663-998-0113-z ↗
74. Comparison of Fe-Ti assessments10.1361/105497198770341923 ↗
75. 2005 · 19
76. Experimental investigation and thermodynamic calculation of the phase equilibria in the Fe–Nb–Ti ternary system10.1016/j.matchemphys.2011.07.071 ↗
77. Thermodynamic re-assessment of Fe–Ti binary system10.1016/S1003-6326(11)61450-7 ↗
78. Thermodynamic modeling of the Fe–Ti–V system10.1016/j.calphad.2012.06.010 ↗
79. Experimental study and thermodynamic re-modelling of the constituent binaries and ternary B–Fe–Ti system10.1016/j.jallcom.2019.05.341 ↗
80. The systems titanium-chromium and titanium-iron
81. The constitution of alloys of iron and manganese with transition elements of the first long period10.1098/rsta.1957.0004 ↗
82. An investigation on the titanium–iron–carbon system
83. Solubility and diffusion of titanium in iron
84. Residual deformation during transformation of iron and iron alloys
85. Untersuchung von Phasenumwandlungen in reinen Eisenlegierungen mit der magnetischen Waage10.1002/srin.196602736 ↗
86. Effect of magnetic transition on the solubility of alloying elements in alpha iron10.2320/jinstmet1952.43.2_118 ↗
87. Booker · 1979
88. Kubaschewski · 1982
89. The determination of the Ti-rich liquidus and solidus of the Ti-Fe system10.1007/BF02646151 ↗
90. Heat capacities of intermetallic compounds in the iron–titanium system
91. The Fe−Ti (iron-titanium) system10.1007/BF02868286 ↗
92. Formation of BCC TiFe hydride under high hydrogen pressure10.1016/j.ijhydene.2013.03.120 ↗
93. The application of the Rietveld method to a highly strained material with microtwins TiFeD1.910.1107/S002188988801430X ↗
94. Site preference, thermodynamic, and magnetic properties of the ternary Laves phase Ti(Fe1–xAlx)2 with the crystal structure of the MgZn2-type
95. Ab initio based study of finite-temperature structural, elastic and thermodynamic properties of FeTi10.1016/j.intermet.2013.09.008 ↗
96. Compressibility and phase transition of intermetallic compound Fe2Ti10.1016/j.jallcom.2013.01.052 ↗
97. A first-principles study on the structural, elastic and electronic properties of the C14 Laves phase compounds TiX2 (X=Cr, Mn, Fe)10.1016/j.physb.2013.03.012 ↗
98. Anisotropic mechanical behavior of ultrafine eutectic TiFe cast under non-equilibrium conditions10.1016/j.intermet.2010.10.012 ↗
99. Growth and properties of single crystals of FeTi10.1002/crat.19800151105 ↗
100. Moment-volume instabilities in TixFe100-x alloys with compositions around the C14 Laves phase TiFe210.1007/s100510050454 ↗