journal article·2020-06

Thermodynamic evaluation and investigation of solidification microstructure in the Fe–Cr–Ni–C system

Wenliang Liu, Chong Chen, Ying Tang, Qianxin Long, Shizhong Wei, Guoshang Zhang, Feng Mao, Qingwei Jiang, Tianxiang Zhang, Mengmeng Liu

Calphad· Volume 69
Publisher page

Abstract

Abstract Based on a critical review on various experimentally measured phase relations and thermodynamic properties, a thermodynamic update of the Fe–Ni–C ternary system was firstly carried out by the CALPHAD (CALculation of PHAse Diagrams) method. The thermodynamic database of the Fe–Cr–Ni–C system was then established by extrapolating the description of the accepted ternary systems. No quaternary parameters were introduced in the present work. Good correspondence between calculated and experimental data has been achieved both in Fe–Ni–C and Fe–Cr–Ni–C systems. Eight as-cast alloys were studied to complement the solidification behaviors of the Fe–Cr–Ni–C system by X-ray diffraction analysis and scanning electron microscope. The solidification sequences and volume fractions of precipitated phases predicated from the modified Scheil-Gulliver solidification simulations agree reasonably with the presently measured data, which further validates the reliability of the present thermodynamic description.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
2. Wear and corrosion behaviour of high-chromium (14–30% Cr) cast iron alloys10.1016/S0924-0136(02)00458-2 ↗
3. Heat treatment and two-body abrasion of Ni-Hard 410.1016/j.wear.2014.01.013 ↗
4. Artificial neural network modelling for evaluating austenitic stainless steel and Zircaloy-2 welds10.1016/j.jmatprotec.2005.04.081 ↗
5. Effect of carbides on wear characterization of high-alloy steels under high-stress rolling-sliding condition10.1080/10402004.2014.890265 ↗
6. Effect of trace Ni on the resistance of high-Cr cast iron to slurry erosion10.1016/j.wear.2019.01.033 ↗
7. An overview on phase equilibria and thermodynamic modeling in multicomponent Al alloys: focusing on the Al–Cu–Fe–Mg–Mn–Ni–Si–Zn system10.1016/j.calphad.2011.06.007 ↗
8. CSUTDCC1-A thermodynamic database for multicomponent cemented carbides10.1016/j.ijrmhm.2013.10.005 ↗
9. Thermodynamic assessment of the Al–C–Fe system10.1016/j.calphad.2017.05.003 ↗
10. A thermodynamic evaluation of the Fe–Cr–C system10.1016/j.calphad.2014.01.002 ↗
11. A thermodynamic assessment of the Fe–Cr–Ni–C system10.1007/BF02664985 ↗
12. Review on research progress of steel and iron wear-resistant materials
13. A reassessment of the Cr–Fe–Ni system10.1007/BF02672583 ↗
14. A thermodynamic evaluation of the C–Fe–Ni system10.1016/0364-5916(87)90039-3 ↗
15. Thermodynamic evaluation of the Cr–Ni–C system10.1007/BF02646072 ↗
16. Revision of thermodynamic descriptions of the Fe–Cr & Fe–Ni liquid phases10.1016/0364-5916(93)90004-U ↗
17. Thermodynamic calculations in stainless steels alloy systems
18. Thermodynamic properties of cementite (Fe3C)10.1016/j.calphad.2010.01.004 ↗
19. Thermodynamic assessment of Cr–Nb–C and Mn–Nb–C systems10.1016/j.calphad.2012.09.002 ↗
20. Thermodynamic reassessment of Fe–Cr–Ni system with emphasis on the iron-rich corner10.1016/S0364-5916(99)00027-9 ↗
21. Phase equilibria in the Fe-Cr-Ni-C system
22. Computation of partial equilibrium solidification with complete interstitial and negligible substitutional solute back diffusion10.2320/matertrans.43.551 ↗
23. Hypoeutectic Fe-Cr-Ni-Mo-C alloys additionally strengthened by the Frank-Kasper phases–Design by means of the CALPHAD approach10.1016/j.calphad.2018.12.011 ↗
24. On the stability of Cr carbide10.1016/0364-5916(92)90002-F ↗
25. A thermodynamic evaluation of the Fe–C system
26. Investigations of the melting equilibria in the Fe corner of the ternary system Fe–Cr–Ni
27. Segregation behaviour of alloying elements in Fe–Cr–Ni melts–also with additions of Mo and V
28. Determination of liquidus and solidus surfaces at iron-rich region of Fe–Cr–Ni system10.2355/tetsutohagane1955.73.14_1676 ↗
29. A thermodynamic evaluation of the Fe–Cr–C system
30. Thermodynamic properties of Cr–C10.1016/0364-5916(87)90045-9 ↗
31. Thermodynamic assessment of the Fe–Mn–C system10.1016/j.calphad.2011.08.002 ↗
32. Xing · 1985
33. Thermochemical and phase diagram analysis of the Ni–C, Co–C, and Co–Ni–C systems, High Temp
34. Carbon solute interactions in Fe–Ni–C alloys
35. Thermodynamics of carbon in nickel, iron–nickel and iron–chromium–nickel alloys10.1007/BF02644258 ↗
36. Thermodynamics of the fcc Fe–Ni–C and Ni–C alloys10.1007/BF02917551 ↗
37. Activity of carbon in iron–nickel alloys at 1000°C
38. Activity coefficient of carbon in Fe–Co–Ni–C alloys at 1273 K10.1007/BF02654569 ↗
39. Phase relationships in the systems Fe–Pb–Ni, Fe–Ni–C (sat) and Fe–Pb–Ni–C 1300 to 1550 °C
40. The solubility of carbon in molten iron–nickel alloys
41. The solubility of graphite in manganese, cobalt and nickel
42. Activity of carbon in liquid iron alloys at 1550°C10.1007/BF02643222 ↗
43. Thermodynamic properties of liquid alloys of 3d transition metals with metalloids (Silicon, Carbon and Boron)10.1016/0925-8388(94)90720-X ↗
44. Liquidus and solidus relations in iron-rich iron–carbon–nickel alloys
45. Investigation of the Fe–C and Fe–C–M systems by radioisotope methods
46. Effect of magnetism on the partition of alloying elements between cementite and ferrite10.2320/jinstmet1952.40.6_593 ↗
47. Study on carbides in iron and steel by electrolytic isolation (report 2). Partition of alloying elements between ferrite and carbides10.2320/jinstmet1952.19.6_385 ↗
48. Determination of the Fe-rich portion of the Fe–Ni–C phase diagram10.1007/BF02661942 ↗
49. 550 and 450°C isothermal sections of Fe–Ni–C phase diagram
50. Carbon activity and solubility in austenitic stainless steels with 18% Cr
51. An experimental study of carbide–austenite equilibria in iron-base alloys with Mo, Cr, Ni, and Mn in the temperature range 1173 to 1373 K10.1007/BF02646571 ↗
52. Phase relationships in the iron-rich Fe–Cr–Ni–C system at solidification temperatures10.1007/BF02650129 ↗
53. On structural diagram of austenitic 25% Cr–20% Ni–Fe–C type alloys10.2355/tetsutohagane1955.58.1_107 ↗
54. The effect of various alloying elements on the size of γ-space in the iron–chromium–carbon system. Ⅱ. The system iron–chromium–carbon–nickel
55. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
56. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
57. Enthalpies of formation of liquid alloys bismuth-gallium-tin at 723 K. Choice of an analytical representation of integral and partial excess functions of mixing10.1051/jcp/1975720083 ↗
58. A regular solution model for phases with several components and sublattices, suitable for computer applications10.1016/0022-3697(81)90144-X ↗
59. A model for alloying in ferromagnetic metals10.1016/0364-5916(78)90011-1 ↗
60. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗