A CALPHAD-type Young's modulus database of Ti-rich Ti–Nb–Zr–Mo system
Source abstract
Abstract
Abstract Accurate Young's modulus is the necessity for the design of biomedical Ti alloys. A combinatorial method of the diffusion couple, nanoindentation, electron probe microanalysis (EPMA), and CALculation of PHAse Diagrams (CALPHAD) techniques has been utilized to construct the Young's modulus database of Ti alloys with various compositions in the present work. Two groups of body-centered cubic (bcc) Ti–Nb–Zr–Mo quaternary diffusion couples annealed at 1273 K for 25 h were experimentally prepared. Subsequently, the composition-dependent mechanical properties in the wide compositional range of Ti-based alloys were obtained by using EPMA and nanoindentation probes. Finally, on the basis of the measured Young's moduli in the present and previous work and the modeling parameters of Young's modulus of Ti–Nb–Zr system, the Young's modulus database of bcc Ti–Nb–Zr–Mo system was established through the CALPHAD approach. The CALPHAD-type database of bcc Ti–Nb–Zr–Mo system can provide the accurate Young's moduli of Ti alloys with wide compositions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
2. Interdiffusion and atomic mobility in the bcc Ti-rich Ti–Cr–Mn system10.1016/j.calphad.2020.101747 ↗
3. Experimental investigation and thermodynamic calculation of Ti–Hf–Mn system10.1016/j.calphad.2020.101776 ↗
4. Ti based biomaterials, the ultimate choice for orthopaedic implants–A review10.1016/j.pmatsci.2008.06.004 ↗
5. Interdiffusion and atomic mobility in bcc Ti–rich Ti–Nb–Zr system10.1016/j.calphad.2017.12.002 ↗
6. Investigations on diffusion behaviors in Ti-rich Ti–Nb–Zr–Cr system: experimental measurement and CALPHAD modeling10.1016/j.calphad.2018.07.005 ↗
7. Thermodynamic description of the Ti–Mo–Nb–Ta–Zr system and its implications for phase stability of Ti bio-implant materials10.1016/j.calphad.2018.02.004 ↗
8. Design and fabrication of Ti–Zr–Hf–Cr–Mo and Ti–Zr–Hf–Co–Cr–Mo high-entropy alloys as metallic biomaterials10.1016/j.msec.2019.110322 ↗
9. Thermodynamic description and phase selection for the Mo–Ti–Zr biomedical alloys10.1016/j.calphad.2020.101799 ↗
10. Cluster-formula-embedded machine learning for design of multicomponent β-Ti alloys with low Young's modulus10.1038/s41524-020-00372-w ↗
11. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti–35Nb alloy produced from an elemental powder mixture10.1016/j.jmst.2020.05.052 ↗
12. Review of the design of titanium alloys with low elastic modulus as implant materials10.1002/adem.202000555 ↗
13. Elastoplastic properties of a low-modulus titanium-based β alloy10.1134/S1063784213100046 ↗
14. Nunes · J. Alloys Compd. · 2018 · 743 · 14110.1016/j.jallcom.2018.01.305 ↗
15. High-throughput development and applications of the compositional mechanical property map of the β titanium alloys10.1016/j.jmst.2020.07.035 ↗
16. Combinatorial approaches as effective tools in the study of phase diagrams and composition-structure-property relationships10.1016/j.pmatsci.2005.10.001 ↗
17. High-efficiency combinatorial approach as an effective tool for accelerating metallic biomaterials research and discovery10.1016/j.msec.2014.02.039 ↗
18. Experimental investigations on the quaternary interdiffusion coefficients, Young's modulus and hardness in bcc Ti–Nb–Ta–Zr quaternary alloys10.1007/s11669-018-0702-8 ↗
19. Impact of Sc addition on diffusion kinetics and mechanical properties of bcc Ti alloys10.1007/s11661-019-05198-w ↗
20. High-throughput screening for biomedical applications in a Ti–Zr–Nb alloy system through masking co-sputtering10.1007/s11433-019-9387-7 ↗
21. A MGI-oriented investigation of the Young's modulus and its application to the development of a novel Ti–Nb–Zr–Cr bio-alloy10.1016/j.msec.2019.110265 ↗
22. Theoretical calculation of Young's modulus for multicomponent alloys based on CALPHAD method
23. Computational modeling of elastic constants as a function of temperature and composition in Zr–Nb alloys10.1016/j.calphad.2014.11.003 ↗
24. Elastic knowledge base of bcc Ti alloys from first–principles calculations and CALPHAD–based modeling10.1016/j.commatsci.2017.08.037 ↗
25. Effects of alloying elements on the elastic properties of bcc Ti–X alloys from first-principles calculations10.1016/j.commatsci.2017.10.016 ↗
26. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
27. Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements10.1016/j.actamat.2004.08.002 ↗
28. A pragmatic method to determine the composition-dependent interdiffusivities in ternary systems by using a single diffusion couple10.1016/j.scriptamat.2014.07.016 ↗
29. High-throughput determination of interdiffusion coefficients for Co–Cr–Fe–Mn–Ni high-entropy alloys10.1007/s11669-017-0569-0 ↗
30. Computational thermodynamics and its applications10.1016/j.actamat.2020.08.008 ↗
31. Modeling of molar volume for the Ni–Al γ/γ′ binary phases within the framework of CALPHAD method10.1016/j.calphad.2020.101792 ↗
32. Thermodynamic modeling of selected ternary systems containing Y and CALPHAD simulation of CoNiCrAlY metallic coatings10.1016/j.calphad.2020.102214 ↗
33. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
34. Generic relation between the electron work function and Young's modulus of metals10.1063/1.3614475 ↗
35. Strengthening mechanism of aluminum on elastic properties of NbVTiZr high-entropy alloys10.1016/j.intermet.2017.09.003 ↗
36. Review on research progress of steel and iron wear-resistant materials
37. Effect of slippage rate on frictional wear behaviors of high-speed steel with dual-scale tungsten carbides (M6C) under high-pressure sliding-rolling condition10.1016/j.triboint.2020.106719 ↗
38. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
39. Review of research on the mechanical properties of the human tooth10.1038/ijos.2014.21 ↗
40. Alloys-by-design: application to titanium alloys for optimal superplasticity10.1016/j.actamat.2019.07.026 ↗