journal article·2015-06Open access

Sn–Ag–Cu nanosolders: Melting behavior and phase diagram prediction in the Sn-rich corner of the ternary system

Ali Roshanghias, Jan Vrestal, Andriy Yakymovych, Klaus W. Richter, Herbert Ipser

Calphad· Volume 49

Abstract

Melting temperatures of Sn-Ag-Cu (SAC) alloys in the Sn-rich corner are of interest for lead-free soldering. At the same time, nanoparticle solders with depressed melting temperatures close to the Sn-Pb eutectic temperature have received increasing attention. Recently, the phase stability of nanoparticles has been the subject of plenty of theoretical and empirical investigations. In the present study, SAC nanoparticles of various sizes have been synthesized via chemical reduction and the size dependent melting point depression of these particles has been specified experimentally. The liquidus projection in the Sn-rich corner of the ternary SAC system has also been calculated as a function of particle size, based on the CALPHAD-approach. The calculated melting temperatures were compared with those obtained experimentally and with values reported in the literature, which revealed good agreement. The model also predicts that with decreasing particle size, the eutectic composition shifts towards the Sn-rich corner.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Melting of isolated tin nanoparticles10.1103/PhysRevLett.85.1250 ↗
2. Synthesis and melting behaviour of Bi, Sn and Sn–Bi nanostructured alloy10.1016/j.jallcom.2014.08.122 ↗
3. Ogorelec, aggregates of Sn-clusters: partial coalescence during the initial heating10.1016/S0167-577X(02)01094-7 ↗
4. Recent advances of nanolead-free solder material for low processing temperature interconnect applications10.1016/j.microrel.2013.04.005 ↗
5. Phase diagram prediction and particle characterisation of Sn–Ag nano alloy for low melting point lead-free solders10.2298/JMMB120121032S ↗
6. Melting and solidification properties of the nanoparticles of Sn3.0Ag0.5Cu lead-free solder alloy10.1016/j.matchar.2010.02.004 ↗
7. Synthesis and characterization of lead-free solders with Sn-3.5Ag−xCu (x=0.2, 0.5, 1.0) alloy nanoparticles by the chemical reduction method10.1149/1.1954928 ↗
8. Green approach to synthesis of Nanoparticles of Sn­3.0Ag­0.5Cu lead-free solder alloy10.2320/matertrans.M2012112 ↗
9. Size control and characterization of Sn–Ag–Cu lead-free nanosolders by a chemical reduction proces10.1007/s11664-011-1765-z ↗
10. Nanoparticles of Sn3.0Ag0.5Cu alloy synthesized at room temperature with large melting temperature depression
11. Nanoparticles of SnAgCu lead-free solder alloy with an equivalent melting temperature of SnPb solder alloy10.1016/j.jallcom.2009.05.042 ↗
12. The melting behavior of aluminum nanoparticles10.1016/j.tca.2007.07.007 ↗
13. The size dependence of the melting point of small particles of tin10.1088/0508-3443/18/12/308 ↗
14. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
15. Phase stability of Ag–Sn alloy nanoparticles10.1016/j.jallcom.2013.12.101 ↗
16. Effect of substrates on the melting temperature of gold nanoparticles10.1016/j.calphad.2006.10.001 ↗
17. Phase diagram reassessment of Ag–Au system including size effect10.1016/j.calphad.2007.07.004 ↗
18. Cu–Ni nanoalloy phase diagram – prediction and experiment10.1016/j.calphad.2013.11.004 ↗
19. Tin–silver–copper eutectic temperature and composition10.1007/s11661-000-0111-5 ↗
20. On the synthesis and thermal behavior of Tin-based alloy (Sn–Ag–Cu) nanoparticles10.1039/C5NR00462D ↗
21. Experimental investigation and thermodynamic assessment of the Mg–Gd–Ag system focused on Mg-rich region10.1016/j.calphad.2014.10.002 ↗
22. Phase equilibria of the Ag–Sn–Cu ternary system10.1557/JMR.2004.0296 ↗
23. Experimental and thermodynamic assessment of Sn–Ag–Cu solder alloys10.1007/s11664-000-0003-x ↗
24. Lead-free solders: atlas of phase diagrams for lead-free soldering
25. Thermodynamic evaluation of binary phase diagrams of small particle systems
26. Surface tension and its temperature coefficient of liquid Sn-X (X=Ag, Cu) alloys10.2320/matertrans.45.2864 ↗
27. Thermodynamic study on the melting of nanometer-sized gold particles on graphite substrate10.1007/s10853-005-1927-6 ↗
28. West · 1972 · 52
29. Thermophysical properties of undercooled liquid Cu–Ni alloys10.1007/s10765-004-5757-6 ↗
30. Iida · 1993
31. Prediction of alloy surface tension using a thermodynamic database10.1016/j.calphad.2004.06.002 ↗
32. Surface tension of molten cu-sn alloys under different oxygen containing atmospheres10.1021/je800717a ↗
33. Whisker and Hillock formation on Sn, Sn–Cu and Sn–Pb electrodeposits10.1016/j.actamat.2005.07.016 ↗
34. Phase stability and thermal expansion behavior of Cu6Sn 5 intermetallics doped with Zn, Au and In10.1016/j.intermet.2013.07.012 ↗
35. Preparation and characterization of nano-sized Ag/PVP composites for optical applications10.1007/s100510070243 ↗
36. The influence of solvents and surfactants on the preparation of copper nanoparticles by a chemical reduction method
37. Study of CoFe2O4 particles synthesized with various concentrations of PVP polymer10.1007/s10948-012-1805-9 ↗
38. Effects of interaction parameters and melting points of pure metals on the phase diagrams of the binary alloy nanoparticle systems: a classical approach based on the regular solution model10.1016/j.calphad.2008.11.001 ↗