Sintered Copper-Based Powder Friction Material Filled with Fullerene-Like Glass Carbon
Source abstract
Abstract
Existing compositions of sintered copper-based powder friction materials have been analyzed. It has been indicated that these materials, which operate under lubricating conditions, usually contain fine pencil-type or coarse casting graphite as an antiseize additive. As a friction additive, oxide and carbide powders and other high-melting materials are used. In this work, the results of investigations of tribotechnical properties of the sintered powder friction material based on copper filled with glass carbon are given. It is shown that its use provides an increase in the friction coefficient of the material with a decrease in wear over the period of its operation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Tribology and Wear Analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Il’yushchenko, A.F., Rogovoi, A.N., Dmitrovich, A.A., and Leshok, A.V., Sintered frictional materials, in Poroshkovaya metallurgiya v Belarusi: vyzovy vremeni (Powder Metallurgy in Belarus: New Challenges), Il’yushchenko, A.F., Ed., Minsk: Belarusskaya Navuka, 2017, pp. 113–121.
2. Pierson, H.O., Handbook of Carbon, Graphite, Diamond and Fullerenes: Processing, Properties and Applications, Park Ridge, NJ: Noyes, 1993.
3. Larionova, N.S., Nikonova, R.M., and Ladyanova, V.I., Mechanosynthesis of nanostructured composites copper-fullerite, copper-graphite, Adv. Powder Technol., 2018, no. 29, no. 2, pp. 399–406.10.1016/j.apt.2017.11.027 ↗
4. Il’yushchenko, A.F., Leshok, A.V., Rogovoi, A.N., and Rudakovskii, V.O., Use of sintered powder material FM-15 in the clutch of Belarus-3522 tractors, Aktual. Vopr. Mashinoved., 2016, no. 5, p. 165.
5. Shapovalova, O.A., Tarasik, V.P., Romanovich, Yu.S., and Leshok, A.V., Mechanical and thermal loading of clutches of hydromechanical transmission, Avtomob. Prom-st., 2014, no. 2, p. 15.
6. Borisov, A.M., Ion-induced processes and analysis of the surface layer under high-dose irradiation of metals and carbon-graphite materials, Extended Abstract of Doctoral (Phys.-Math.) Dissertation, Moscow, 2005.
7. Borisov, A.M., Virgil’ev, Yu.S., Mashkova, E.S., Nemov, A.S., Pitirimova, E.A., and Khokhlov, A.F., Ion-induced structural changes in glass carbon, Vopr. At. Nauki Tekh., Ser.: Termoyad. Sint., 2003, no. 1, pp. 8–14.
8. Holmén, G., Svensson, B., and Burén, A., Ion induced electron emission from polycrystalline copper, Nucl. Instrum. Methods Phys. Res., 1981, vol. 185, nos. 1–3, pp. 523–532.10.1016/0029-554X(81)91251-9 ↗
9. Il’yushchenko, A.F., Dmitrovich, A.A., and Leshok, A.V. Studying microprofile of surface of steel disc that operates in various friction units in a pair with MK-5 metal-ceramic frictional material, J. Frict. Wear, 2014, vol. 35, no. 3, pp. 181–187.10.3103/S1068366614030052 ↗