Effect of preliminary ball burnishing on wear resistance of the nitrided VT22 alloy
Source abstract
Abstract
The effect of combined treatment on the tribotechnical properties of VT22 titanium alloy has been investigated. The combined treatment consisted of previous cold surface plastic deformation (ball burnishing) and subsequent thermodiffusion saturation of the surface by nitrogen. It was set that, in order to achieve high wear resistance of the VT22–BrAZhN 10-4-4 friction pair, it is necessary to carry out the ball burnishing at small loads, increasing the number of passes before nitriding.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Metal and Thin Film Mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Gorynin, I.V. and Chechulin, B.B., Titan v mashinostroenii (Use of Titan in Machine Engineering), Moscow: Mashinostroenie, 1990.
2. Trofimov, V.A., Antonyuk, S.L., Ivasishin, O.M., and Molyar, A.G., Titanium alloys in the aircrafts of the Antonov Aviation Scientific-Technical Complex, Trudy mezhdunarodnoi konferentsii “Ti–2005” v SNG (Proc. Inst. Conf. “Ti–2005 in CIS Countries”), Kiev, 2005, pp. 298–305.
3. Dukhota, O.I., Kindrachuk, M.V., and Labunets, V.F., Use of titanium alloys in the friction units of aviation machines, in Problemi tertya ta znoshuvannya (The Problems of Friction and Wear), Kiev: Nats. Akad. Ukr., 2008, no. 49, pp. 14–26.
4. Posvyatenko, E.K. and Alekseev, V.V., Cold plastic deformation as a method of nitriding acceleration, Uprav. Proekt., Sist. Anal. Logist., Tekh. Ser., 2012, no. 9, pp. 157–161.
5. Khorev, A.I. and Khorev, M.A., Titanium alloys: use and prospective development, Titan, 2005, no. 1, pp. 40–53.
6. Vanzhula, T.V., Zamkov, V.N., and Prilutskii, V.P., Improvement of wear-resistance of the parts from titanium alloys, Avtom. Svarka, 2003, no. 8, pp. 31–35.
7. Smelyanskii, V.M., Mekhanika uprochneniya detalei poverkhnostnymi plasticheskim deformirovaniem (Mechanics of Hardening of the Part by Surface Plastic Deformation), Moscow: Mashinostroenie, 2002.
8. Aksenov, A.F., Polishchuk, I.E., and Kul’gavyi, E.A., Status and prospects of use of antifriction coatings on titanium alloys, Trenie Iznos, 1982, vol. 3, no. 3, pp. 421–427.
9. Fedirko, V.M., Pohrelyuk, I.M., Molyar, A.G., and Trofimov, V.A., The technology of vacuum nitriding of parts of the AN-148 chassis made of VT-22 alloy, Titan, 2005, no. 2, pp. 55–61.
10. Ezhelev, A.V., Bobrovskii, I.N., and Luk’yanov, A.A., Analysis of the methods of surface-plastic deformation treatment, Fundam. Issled., 2012, no. 6, pp. 642–646.