Comparison of tribological characteristics of nanostructured TiN, MoN, and TiN/MoN Arc-PVD coatings
Source abstract
Abstract
The tribological properties of TiN, MoN, and TiN/MoN coatings have been investigated. It has been shown that, for multilayer (alternate) TiN/MoN coatings, a maximum hardness reaches 29–31 GPa that is significantly less than the hardness of MoN coatings (36.0–40.2 GPa) when changing the deposition conditions. MoN coatings possess lower coefficients of friction compared to TiN coatings, in particular at the initial stages of a scratch test. Two mechanisms of destruction are revealed by the adhesion tests, i.e., a cohesive failure with a minimum critical loading L C1 and an adhesive test (plastic abrasion) with the appearance of a first crack L C2. The resistance of multilayer (nanoscale) nanostructured TiN/MoN coatings with a total thickness of up to 8 μm is greater than that of TiN coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Pogrebnyak, A.D. and Tyurin, Yu.N., Modification of material properties and coating deposition using plasma jets, Phys.-Usp., 2005, vol. 48, no. 5, pp. 487–514.10.1070/PU2005v048n05ABEH002055 ↗
2. Pogrebnjak, A.D., Shpak, A.P., Azarenkov, N.A., and Beresnev, V.M., Structures and properties of hard and superhard nanocomposite coatings, Phys.-Usp., 2009, vol. 52, no. 1, pp. 29–54.10.3367/UFNe.0179.200901b.0035 ↗
3. Nanostructured Coatings, Cavaleiro, A. and de Hosson, J.T.M., Eds., New York: Springer-Verlag, 2006.
4. Pogrebnjak, A.D. and Beresnev, V.M., Nanocoatings, Nanosystems, Nanotechnologies, Oak Park, IL: Bentham Science, 2012.10.2174/97816080541691120101 ↗
5. Pogrebnjak, A.D., Sobol, O.V., Beresnev, V.M., Turbin, P.V., Kirik, G.V., Makhmudov, N.A., Il’yashenko, M.V., Shypylenko, A.P., Kaverin, M.V., Tashmetov, M.Yu., and Pshyk, A.V., Phase composition, thermal stability, physical and mechanical properties of superhard on base Zr-Ti-Si-N, in Nanocomposite Coatings in Nanostructured Materials and Nanotechnology IV: Ceramic Engineering and Science Proceeding, 2010, no. 7, pp. 127–138.10.1002/9780470944042.ch14 ↗
6. Pogrebnjak, A.D., Bratushka, S.N., Beresnev, V.M., and Levintant-Zayonts, N., Shape memory effect and superelasticity of titanium nickelide alloys implanted with high ion doses, Russ. Chem. Rev., 2013, vol. 82, pp. 1135–1159.10.1070/RC2013v082n12ABEH004344 ↗
7. Boiko, V.I., Valyaev, A.N., and Pogrebnyak, A.D., Metal modification by high-power pulsed particle beams, Phys.-Usp., 1999, vol. 42, no. 11, pp. 1139–1166.10.1070/PU1999v042n11ABEH000471 ↗
8. Tyurin, Yu.N. and Pogrebnjak, A.D., Electric heating using a liquid electrode, Surf. Coat. Technol., 2001, vol. 142–144, pp. 293–299.10.1016/S0257-8972(01)01207-5 ↗
9. Podgornik, B. and Vizintin, J., Wear resistance of pulse plasma nitrided AISI 4140 and A355 steels, Mater. Sci. Eng.: A, 2001, vol. 315, nos. 1–2, pp. 28–34.10.1016/S0921-5093(01)01202-3 ↗
10. Grimanelis, D. and Eyre, T.S., Wear characteristics of a diffusion bonded sintered steel with short term surface treatments, Wear, 2007, vol. 262, nos. 1–2, pp. 93–103.10.1016/j.wear.2006.04.006 ↗
11. Pantelis, D.I., Bouyiouri, E., Kouloumbi, N., Vassiliou, P., and Koutsomichalis, A., Wear and corrosion resistance of laser surface hardened structural steel, Surf. Coat. Technol., 2002, vol. 161, nos. 2–3, pp. 125–134.10.1016/S0257-8972(02)00495-4 ↗
12. Todaka, Y., Umemoto, M., Li, J., and Tsuchiya, K., Nanocrystallization of carbon steels by shot peening and drilling, Rev. Adv. Mater. Sci., 2005, vol. 10, pp. 409–416.
13. Pogrebnyak, A.D., Bratushka, S.N., Il’yashenko, M.V., Makhmudov, N.A., Kolisnichenko, O.V., Tyurin, Yu.N., Uglov, V.V., Pshik, A.V., and Kaverin, M.V., Tribological and physical-mechanical properties of protective coatings from Ni-Cr-B-Si-Fe/WC-Co-Cr before and after fission with a plasma jet, J. Friction Wear, 2011, vol. 32, no. 2, pp. 84–90.10.3103/S1068366611020085 ↗
14. Ivasishin, O.M., Pogrebnjak, A.D., and Bratushka, S.N., Nanostructured Layers and Coating Formed by Ion-Plasma Fluxes in Titanium Alloys and Steels, Kiev: Akademperiodyka, 2011.10.15407/akademperiodyka.181.286 ↗
15. Pogrebnyak, A.D., Beresnev, V.M., Kaverina, A.Sh., Kolesnikov, D.A., Yakushchenko, I.V., Ilyashenko, M.V., and Makhmudov, N.A., Adhesive strength and physical, mechanical, and triboengineering properties of nano- and microstructural Al2O3 coatings, J. Friction Wear, 2012, vol. 33, no. 3, pp. 195–202.10.3103/S1068366612030087 ↗
16. Pogrebnjak, A.D., Bratushka, S., Boyko, V.I., Shamanin, I.V., and Tsvintarnaya, Yu.V., A review of mixing processes in Ta/Fe and Mo/Fe systems treated by high current electron beams, Nucl. Instrum. Methods Phys. Res. Sect. B: Beam Interact. Mater. Atoms, 1998, vol. 145, no. 3, pp. 373–390.10.1016/S0168-583X(98)00417-0 ↗
17. Pogrebnjak, A.D., Beresnev, V.M., Bondar, O.V., Abadias, G., Chartier, P., Postol’nyi, B.A., Andreev, A.A., and Sobol’, O.V., The effect of nanolayer thickness on the structure and properties of multilayer TiN/MoN coatings, Tech. Phys. Lett., 2014, vol. 40, no. 3, pp. 215–218.10.1134/S1063785014030092 ↗
18. Pogrebnjak, A.D., Structure and properties of nanostructured (Ti-Hf-Zr-V-Nb)N coatings, J. Nanomater., 2013, vol. 2013, ID 780125.10.1155/2013/780125 ↗