Influence of porous silicon formation on the performance of multi-crystalline silicon solar cells

The effect of formation of porous silicon on the performance of multi-crystalline silicon (mc-Si) solar cells is presented. Surface treatment of mc-Si solar cells was performed by electrochemical etching in HF-based solution. The effect of etching is viewed through scanning electron microscope (SEM) photographs that indicated the formation of a porous layer on the surface. Total reflection spectroscopy measurements on solar cells revealed reduced reflection after etching. In order to demonstrate the effect of this porous layer on the solar cell performance, illumination-dependent j–V characteristics and spectral response measurements were performed and analysed before and after etching. At all illumination intensities, short-circuit current density and open-circuit voltage values for the etched solar cell were higher than those before etching, whereas fill factor values were lower for the etched cell at high illumination intensities. An interpretation of these findings is presented.