journal article·2020-12

Sulfonated poly(fluorenyl ether ketone)/Sulfonated α-zirconium phosphate Nanocomposite membranes for proton exchange membrane fuel cells

Hang Hu, Fuchuan Ding, Hao Ding, Jingjing Liu, Min Xiao, Yuezhong Meng, Luyi Sun

Publisher page

Abstract

Sulfonated poly(aryl ether) (SPAE) membranes have attracted significant attention as polymer electrolyte membranes due to their superior mechanical properties and low cost. However, the poor chemical stability and methanol barrier property of SPAE membranes limit the fuel cell performance. It is necessary to improve the proton conductivity, methanol barrier property, and stability of SPAE for high-performance fuel cells. Herein, a novel proton conductive filler, sulfonated α-zirconium phosphate (ZrP-SO3H), was synthesized and introduced to sulfonated poly(fluorenyl ether ketone) (SPFEK) to fabricate advanced nanocomposite membranes. The oxidative stability, methanol permeability, water uptake, and proton conductivity of the as-prepared nanocomposite membranes were characterized. The nanocomposite membranes exhibited comparable performance as Nafion® 117 membrane in H2/O2 fuel cell and higher performance than Nafion® 117 in direct methanol fuel cell. These results suggest that ZrP-SO3H-doped SPFEK membrane is a promising candidate as a proton exchange membrane in high-performance fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Steele BCH, Heinzel A (2001) Materials for fuel-cell technologies. Nature 414:345–35210.1038/35104620 ↗
2. Veziroglu A, Macario R (2011) Fuel cell vehicles: state of the art with economic and environmental concerns. Int J Hydrogen Energy 36:25–4310.1016/j.ijhydene.2010.08.145 ↗
3. Roziere J, Jones DJ (2003) Non-fluorinated polymer materials for proton exchange membrane fuel cells. Annu Rev Mater Res 33:503–55510.1146/annurev.matsci.33.022702.154657 ↗
4. Mauritz KA, Moore RB (2004) State of understanding of Nafion. Chem Rev 104:4535–458510.1021/cr0207123 ↗
5. Hickner MA, Ghassemi H, Kim YS, Einsla BR, McGrath JE (2004) Alternative polymer systems for proton exchange membranes (PEMs). Chem Rev 104:4587–461210.1021/cr020711a ↗
6. McGrath JE, Hickner MA, Ghassemi H, Kim YS, Einsla BR (2004) Alternative polymer systems for proton exchange membranes (PEMs). Chem Rev 104:4587–461110.1021/cr020711a ↗
7. Kuzmenko M, Poryadchenko N (2005) Perspective materials for application in fuel-cell technologies. In: Sammes N (ed) Fuel cell technologies: state and perspectives. Springer, Netherlands, pp 253–25810.1007/1-4020-3498-9_27 ↗
8. Zhai L, Li H (2019) Polyoxometalate-polymer hybrid materials as proton exchange membranes for fuel cell applications. Molecules 24:342510.3390/molecules24193425 ↗
9. Han X, Xie Y, Liu D, Chen Z, Zhang H, Pang J, Jiang Z (2019) Synthesis and properties of novel poly(arylene ether)s with densely sulfonated units based on carbazole derivative. J Membr Sci 589:11723010.1016/j.memsci.2019.117230 ↗
10. Kwon S, Kim T-H (2017) The effect of adjusting the hydrophilic-hydrophobic block length in densely sulfonated poly(fluorenyl ether sulfone) block copolymer membranes. Int J Hydrogen Energy 42:11845–1185610.1016/j.ijhydene.2017.03.107 ↗
11. McGrath JE, Wang F, Hickner M, Kim YS, Zawodzinski TA (2002) Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes. J Membr Sci 197:231–24210.1016/S0376-7388(01)00620-2 ↗
12. Schuster M, Kreuer KD, Andersen HT, Maier J (2007) Sulfonated poly(phenylene sulfone) polymers as hydrolytically and thermooxidatively stable proton conducting ionomers. Macromolecules 40:598–60710.1021/ma062324z ↗
13. Watanabe M, Yasuda T, Li Y, Miyatake K, Hirai M, Nanasawa M (2006) Synthesis and properties of polyimides bearing acid groups on long pendant aliphatic chains. J Polym Sci A Polym Chem 44:3995–400510.1002/pola.21574 ↗
14. Meng Y, Wang L, Wang S, Shang X, Li L, Hay AS (2004) Synthesis and sulfonation of poly(aryl ethers) containing triphenyl methane and tetraphenyl methane moieties from isocynate-masked bisphenols. Macromolecules 37:3151–315810.1021/ma0356055 ↗
15. Kreuer KD (2001) On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells. J Membr Sci 185:29–3910.1016/S0376-7388(00)00632-3 ↗
16. Chen Y, Meng Y, Wang S, Tian S, Chen Y, Hay AS (2006) Sulfonated poly(fluorenyl ether ketone) membrane prepared via direct polymerization for PEM fuel cell application. J Membr Sci 280:433–44110.1016/j.memsci.2006.01.052 ↗
17. Zarrin H, Higgins D, Jun Y, Chen Z, Fowler M (2011) Functionalized graphene oxide nanocomposite membrane for low humidity and high temperature proton exchange membrane fuel cells. J Phys Chem C 115:20774–2078110.1021/jp204610j ↗
18. Tripathi BP, Shahi VK (2008) Functionalized organic-inorganic nanostructured N-p-carboxy benzyl chitosan-silica-PVA hybrid polyelectrolyte complex as proton exchange membrane for DMFC applications. J Phys Chem B 112:15678–1569010.1021/jp806337b ↗
19. Holdcroft S, Thomas OD, Peckham TJ, Thanganathan U, Yang YS (2010) Sulfonated polybenzimidazoles: proton conduction and acid-base crosslinking. J Polym Sci A Polym Chem 48:3640–365010.1002/pola.24147 ↗
20. Manthiram A, Zhao JA, Jarvis K, Ferreira P (2011) Performance and stability of Pd-Pt-Ni nanoalloy electrocatalysts in proton exchange membrane fuel cells. J Power Sources 196:4515–452310.1016/j.jpowsour.2011.01.026 ↗
21. Yilmazturk S, Deligoz H, Yilmazoglu M, Damyan H, Oksuzomer F, Koc SN, Durmus A, Gurkaynak MA (2009) A novel approach for highly proton conductive electrolyte membranes with improved methanol barrier properties: layer-by-layer assembly of salt containing polyelectrolytes. J Membr Sci 343:137–14610.1016/j.memsci.2009.07.019 ↗
22. Jiang SP, Liu ZC, Tian ZQ (2006) Layer-by-layer self-assembly of composite polyelectrolyte-nafion membranes for direct methanol fuel cells. Adv Mater 18:1068–107210.1002/adma.200502462 ↗
23. Wang S, Zhang G, Han MM, Li HT, Zhang Y, Ni J, Ma WJ, Li MY, Wang J, Liu ZG, Zhang LY, Na H (2011) Novel epoxy-based cross-linked polybenzimidazole for high temperature proton exchange membrane fuel cells. Int J Hydrogen Energy 36:8412–842110.1016/j.ijhydene.2011.03.147 ↗
24. Lee YM, Phu DS, Lee CH, Park CH, Lee SY (2009) Synthesis of Crosslinked sulfonated poly(phenylene sulfide sulfone nitrile) for direct methanol fuel cell applications. Macromol Rapid Commun 30:64–6810.1002/marc.200800496 ↗
25. Sakamoto M, Nohara S, Miyatake K, Uchida M, Watanabe M, Uchida H (2015) Effects of SiO2 nanoparticles incorporated into poly(arylene ether sulfone ketone) multiblock copolymer electrolyte membranes on fuel cell performance at low humidity. Electrochemistry 83:150–15410.5796/electrochemistry.83.150 ↗
26. Nawn G, Pace G, Lavina S, Vezzu K, Negro E, Bertasi F, Polizzi S, Di Noto V (2015) Nanocomposite membranes based on polybenzimidazole and ZrO2 for high-temperature proton exchange membrane fuel cells. Chemsuschem 8:1381–139310.1002/cssc.201403049 ↗
27. Park KT, Jung UH, Choi DW, Chun K, Lee HM, Kim SH (2008) ZrO2–SiO2/Nafion® composite membrane for polymer electrolyte membrane fuel cells operation at high temperature and low humidity. J Power Sources 177:247–25310.1016/j.jpowsour.2007.11.081 ↗
28. Choi YS, Kim TK, Kim EA, Joo SH, Pak C, Lee YH, Chang H, Seung D (2008) Exfoliated Sulfonated poly(arylene ether sulfone)–clay Nanocomposites. Adv Mater 20:2341–234410.1002/adma.200702131 ↗
29. Liu KL, Lee HC, Wang BY, Lue SJ, Lu CY, Tsai LD, Fang J, Chao CY (2015) Sulfonated poly(styrene-block-(ethylene-ran-butylene)-block-styrene (SSEBS)-zirconium phosphate) (ZrP) composite membranes for direct methanol fuel cells. J Membr Sci 495:110–12010.1016/j.memsci.2015.08.017 ↗
30. Pandey J, Seepana MM, Shukla A (2015) Zirconium phosphate based proton conducting membrane for DMFC application. Int J Hydrogen Energy 40:9410–942110.1016/j.ijhydene.2015.05.117 ↗
31. Sahu AK, Ketpang K, Sharmaugam S, Kwon O, Lee S, Kim H (2016) Sulfonated graphene-nafion composite membranes for polymer electrolyte fuel cells operating under reduced relative humidity. J Phys Chem C 120:15855–1586610.1021/acs.jpcc.5b11674 ↗
32. Sahu AK, Pitchumani S, Sridhar P, Shukla AK (2009) Co-assembly of a nafion-mesoporous zirconium phosphate composite membrane for PEM fuel cells. Fuel Cells 9:139–14710.1002/fuce.200800178 ↗
33. Sigwadi R, Dhlamini MS, Mokrani T, Ṋemavhola F, Nonjola PF, Msomi PF (2019) The proton conductivity and mechanical properties of Nafion®/ ZrP nanocomposite membrane. Heliyon 5:e0224010.1016/j.heliyon.2019.e02240 ↗
34. Mazzapioda L, Panero S, Navarra MA (2019) Polymer electrolyte membranes based on nafion and a superacidic inorganic additive for fuel cell applications. Polymers 11:91410.3390/polym11050914 ↗
35. Yao Y, Lin Z, Li Y, Alcoutlabi M, Hamouda H, Zhang X (2011) Superacidic electrospun fiber-nafion hybrid proton exchange membranes. Adv Energy Mater 1:1133–114010.1002/aenm.201100435 ↗
36. Boo WJ, Sun L, Liu J, Clearfield A, Sue H-J (2007) Effective intercalation and exfoliation of nanoplatelets in epoxy via creation of porous pathways. J Phys Chem C 111:10377–1038110.1021/jp072227n ↗
37. Sun L, Boo WJ, Sue H-J, Clearfield A (2007) Preparation of alpha-zirconium phosphate nanoplatelets with wide variations in aspect ratios. New J Chem 31:39–4310.1039/B604054C ↗
38. Hu H, Martin JC, Xiao M, Southworth CS, Meng Y, Sun L (2011) Immobilization of ionic liquids in layered compounds via mechanochemical intercalation. J Phys Chem C 115:5509–551410.1021/jp111646d ↗
39. Hu H, Martin JC, Zhang M, Southworth CS, Xiao M, Meng Y, Sun L (2012) Immobilization of ionic liquids in theta-zirconium phosphate for catalyzing the coupling of CO2 and epoxides. RSC Adv 2:3810–381510.1039/c2ra00015f ↗
40. Wang Q, Yu J, Liu J, Guo Z, Umar A, Sun L (2013) Na+ and K+-exchanged zirconium phosphate (ZrP) as high-temperature CO2 adsorbents. Sci Adv Mater 5:469–47410.1166/sam.2013.1529 ↗
41. Lu N, Lin K-Y, Kung C-C, Jhuo J-W, Zhou Y, Liu J, Sun L (2014) Intercalated polyfluorinated Pd complexes in alpha-zirconium phosphate for Sonogashira and heck reactions. RSC Adv 4:27329–2733610.1039/C4RA01830C ↗
42. Boo WJ, Sun L, Warren GL, Moghbelli E, Pham H, Clearfield A, Sue HJ (2007) Effect of nanoplatelet aspect ratio on mechanical properties of epoxy nanocomposites. Polymer 48:1075–108210.1016/j.polymer.2006.12.042 ↗
43. Sun L, Boo WJ, Sun D, Clearfield A, Sue H-J (2007) Preparation of exfoliated epoxy/alpha-zirconium phosphate nanocomposites containing high aspect ratio nanoplatelets. Chem Mater 19:1749–175410.1021/cm062993r ↗
44. Sun L, O'Reilly JY, Kong D, Su JY, Boo WJ, Sue HJ, Clearfield A (2009) The effect of guest molecular architecture and host crystallinity upon the mechanism of the intercalation reaction. J Colloid Interface Sci 333:503–50910.1016/j.jcis.2009.02.028 ↗
45. Zhou Y, Wang A, Wang Z, Chen M, Wang W, Sun L, Liu X (2015) Titanium functionalized alpha-zirconium phosphate single layer nanosheets for photocatalyst applications. RSC Adv 5:93969–9397810.1039/C5RA16163K ↗
46. Zhou Y, Liu J, Xiao M, Meng Y, Sun L (2016) Designing supported ionic liquids (ils) within inorganic nanosheets for CO2 capture applications. ACS Appl Mater Interfaces 8:5547–555510.1021/acsami.5b11249 ↗
47. Laipan M, Xiang L, Yu J, Martin BR, Zhu R, Zhu J, He H, Clearfield A, Sun L (2020) Layered intercalation compounds: mechanisms, new methodologies, and advanced applications. Prog Mater Sci 109:10063110.1016/j.pmatsci.2019.100631 ↗
48. Boo WJ, Sun LY, Liu J, Clearfield A, Sue HJ, Mullins MJ, Pham H (2007) Morphology and mechanical behavior of exfoliated epoxy/alpha-zirconium phosphate nanocomposites. Compos Sci Technol 67:262–26910.1016/j.compscitech.2006.08.012 ↗
49. Zhou Y, Huang R, Ding F, Brittain AD, Liu J, Zhang M, Xiao M, Meng Y, Sun L (2014) Sulfonic acid-functionalized alpha-zirconium phosphate single-layer nanosheets as a strong solid acid for heterogeneous catalysis applications. ACS Appl Mater Interfaces 6:7417–742510.1021/am5008408 ↗
50. Zhou Y, Noshadi I, Ding H, Liu J, Parnas RS, Clearfield A, Xiao M, Meng Y, Sun L (2018) Solid acid catalyst based on single-layer alpha-zirconium phosphate nanosheets for biodiesel production via esterification. Catalysts 8:1710.3390/catal8010017 ↗
51. Wang F, Chen TL, Xu JP (1998) Sodium sulfonate-functionalized poly(ether ether ketone)s. Macromol Chem Phys 199:1421–142610.1002/(SICI)1521-3935(19980701)199:7<1421::AID-MACP1421>3.0.CO;2-P ↗
52. Shang X, Tian S, Kong L, Meng Y (2005) Synthesis and characterization of sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane. J Membr Sci 266:94–10110.1016/j.memsci.2005.05.014 ↗
53. Peckham TJ, Holdcroft S (2010) Structure-morphology-property relationships of non-perfluorinated proton-conducting membranes. Adv Mater 22:4667–469010.1002/adma.201001164 ↗
54. Li N, Guiver MD (2014) Ion transport by nanochannels in ion-containing aromatic copolymers. Macromolecules 47:2175–219810.1021/ma402254h ↗
55. Shin DW, Guiver MD, Lee YM (2017) Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability. Chem Rev 117:4759–480510.1021/acs.chemrev.6b00586 ↗
56. Pan J, Wang S, Xiao M, Hickner M, Meng Y (2013) Layered zirconium phosphate sulfophenylphosphonates reinforced sulfonated poly (fluorenyl ether ketone) hybrid membranes with high proton conductivity and low vanadium ion permeability. J Membr Sci 443:19–2710.1016/j.memsci.2013.04.068 ↗
57. Hu H, Xiao M, Wang SJ, Shen PK, Meng YZ (2011) Surface fluorination of poly(fluorenyl ether ketone) ionomers as proton exchange membranes for fuel cell application. Fuel Cells 11:353–36010.1002/fuce.201000017 ↗
58. Clearfield A, Costantino U (1996) Layered metal phosphates and their intercalation chemistry. In: Alberti G, Bein T (eds) Comprehensive supramolecular chemistry. Elsevier, Oxford, UK, pp 107–149
59. Zhou Y, Liu J, Huang R, Zhang M, Xiao M, Meng Y, Sun L (2017) Covalently immobilized ionic liquids on single layer nanosheets for heterogeneous catalysis applications. Dalton Trans 46:13126–1313410.1039/C7DT01510K ↗
60. Ou Y, Tsen W-C, Jang S-C, Chuang F-S, Wang J, Liu H, Wen S, Gong C (2018) Novel composite polymer electrolyte membrane using solid superacidic sulfated zirconia - functionalized carbon nanotube modified chitosan. Electrochim Acta 264:251–25910.1016/j.electacta.2018.01.131 ↗
61. Gonggo ST, Bundjali B, Hariyawati K, Arcana IM (2018) The influence of nano-silica on properties of sulfonated polystyrene-lignosulfonate membranes as proton exchange membranes for direct methanol fuel cell application. Adv Polym Technol 37:1859–186710.1002/adv.21844 ↗