journal article·2005-10

Effect of cerium addition on microstructures of carbon-alloyed iron aluminides

S. Sriram, R. Balasubramaniam, M. N. Mungole, S. Bharagava, R. G. Baligidad

Bulletin of Materials Science· Volume 28· Issue 6
Publisher page

Abstract

The effect of Ce addition on the microstructure of carbon-alloyed Fe3Al-based intermetallic has been studied. Three different alloys of composition, Fe-18.5Al-3.6C, Fe-20.0Al-20C and Fe-19.2Al-3.3C-0.07Ce (in at%), were prepared by electroslag remelting process. Their microstructures were characterized using optical and scanning electron microscopies. Stereological methods were utilized to understand the observed microstructures. All the alloys exhibited a typical two-phase microstructure consisting of Fe3AlC carbides in an iron aluminide matrix. In the alloy without Ce addition, large bulky carbides were equally distributed throughout the matrix with many smaller precipitates interspersed in between. In the alloy with Ce addition, the carbide grain sizes were finer and uniformly distributed throughout the matrix. The effect of Ce addition on the carbide morphology has been explained based on the known effect of Ce in modifying carbide morphology in cast irons.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Balasubramaniam R 1996Scr. Mater. 34 12710.1016/1359-6462(95)00495-5 ↗
2. Balasubramaniam R 1997J. Alloys Comp. 253-254 14810.1016/S0925-8388(96)02940-4 ↗
3. Baligidad R G and Radhakrishna A 2000Mater. Sci. Engg. A287 1710.1016/S0921-5093(00)00832-7 ↗
4. Baligidad R G, Prakash U, Ramakrishna Rao V, Rao P K and Ballal N B 1994Iron and Steel Making 21 324
5. Baligidad R G, Prakash U, Radhakrishna A and Ramakrishna Rao V 1997aScr. Mater. 36 10510.1016/S1359-6462(96)00340-5 ↗
6. Baligidad R G, Prakash U, Radhakrishna A and Ramakrishna Rao V 1997bScr. Mater. 36 66710.1016/S1359-6462(96)00441-1 ↗
7. Kay D A R, Lu W K and McLean A 1975Rare earth-oxygen-sulfur reactions in molten steel, inSulfide inclusions in steel, Proceedings of an international symposium (eds) J J deBarbadillo and E Snape (Metals Park, USA: American Society for Metals) pp 23–43
8. Laha T, Tewari A, Balasubramaniam R, Mungole M N and Baligidad R G 2004Met. Mater. Trans. A35 178910.1007/s11661-004-0087-7 ↗
9. Lin D, Shan A and Li D 1994Scr. Metall. Mater. 31 145510.1016/0956-716X(94)90055-8 ↗
10. Liu C T and Kumar K S 1993J. Metals 45 38
11. Liu C T, Stiegler J O and Fores F H 1990aOrdered intermetallics, inMetals handbook (Metals Park, USA: American Society for Metals) 10 ed.,Vol. 2, pp 913–943
12. Liu C T McKamey C G Lee E H 1990bScr. Metall. 24 38510.1016/0956-716X(90)90275-L ↗
13. Liu C T, McKamey C G and Lee E H 1996Scr. Metall. 23 87510.1016/0036-9748(89)90263-9 ↗
14. McKamey C G and Liu C T 1992Scr. Metall. Mater. 24 119
15. McKamey C G and Pierce D H 1993Scr. Metall. Mater. 28 117310.1016/0956-716X(93)90449-3 ↗
16. Parvathavarthini N, Prakash U and Dayal R K 2002Intermetallics 10 32910.1016/S0966-9795(01)00140-6 ↗
17. Prakash U and Sauthoff G 2001Scr. Mater. 44 7310.1016/S1359-6462(00)00583-2 ↗
18. Sen M and Balasubramaniam R 2000Scr. Mater. 44 61910.1016/S1359-6462(00)00602-3 ↗
19. Underwood E 1970Quantitative stereology (New York: Addison-Wesley Publishing Company) pp 25–103
20. Yangshan S, Zhengjun Y S, Zhonghua Z and Haibo H 1995Scr. Metall. Mater. 33 81110.1016/0956-716X(95)00282-Z ↗
21. Zhu Y F, Liu C T and Chen C H 1996Scr. Mater. 35 143510.1016/S1359-6462(96)00316-8 ↗