The effect of the rate flank wear teeth face mills on the processing
Source abstract
Abstract
In this paper, the model of experimental tooth wear face mills on the back surface of the processing time. Using regression analysis model, the flank of wear on the processing time takes into account the feed, depth and cutting speed for face milling. The created model can calculate the change in of wear in processing for arbitrary cutting conditions of face milling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Mineral Processing and Grinding · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Diniz, A.E. and Filho, J.C., Influence of the relative positions of tool and workpiece on tool life, tool wear and surface finish in the face milling process, Wear, 1999, vol. 232, pp. 67–75.10.1016/S0043-1648(99)00159-3 ↗
2. Koshy, P., Dewes, R.C., and Aspinwall, D.K., High speed end milling of hardened AISI D2 tool steel (∼58 HRC), J. Mater. Proc. Technol., 2002, vol. 127, pp. 266–273.10.1016/S0924-0136(02)00155-3 ↗
3. Chang, W., Sun, J., Luo, X., Ritchie, J.M., and Mack, C., Investigation of microstructured milling tool for deferring tool wear, Wear, 2011, vol. 271, pp. 2433–2437.10.1016/j.wear.2010.12.026 ↗
4. He, L., Sun, L.M., Zhao, X.F., and Wang, J., Effect of grinding wheel diameter change on geometrical parameters of ball-nose end mill, Advanced Materials Research: Manufacturing Science and Engineering I, 2010, vol. 97–101, pp. 4527–4529. doi: 10.4028/www.scientific.net/AMR.97-10110.4028/www.scientific.net/AMR.97-101.4527 ↗
5. Grzesik, W., Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools, Wear, 2008, vol. 265, pp. 327–335.10.1016/j.wear.2007.11.001 ↗
6. Mamalis, A.G., Kundrak, J., and Horvath, M., Wear and tool life of CBN cutting tools, Int. J. Adv. Manufact. Technol., 2002, vol. 20, pp. 475–479.10.1007/s001700200180 ↗
7. Barry, J. and Byrne, G., Cutting tool wear in the machining of hardened steels—Part I: Alumina/TiC cutting tool wear, Wear, 2001, vol. 247, pp. 139–151.10.1016/S0043-1648(00)00531-7 ↗
8. Bouzakis, K.-D., Gerardis, S., Skordaris, G., Katirtzoglou, G., Makrimallakis, S., Klocke, F., and Bouzakis, E., Effect of dry micro-blasting on PVD-film properties, cutting edge geometry and tool life in milling, Surface Coatings Technol., 2009, vol. 204, pp. 1081–1086.10.1016/j.surfcoat.2009.07.018 ↗
9. Jawaid, A., Koksal, S., and Sharif, S., Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy, J. Mater. Proc. Technol., 2001, vol. 116, pp. 2–9.10.1016/S0924-0136(01)00850-0 ↗
10. Loladze, T.N., Prochnost’ i iznosostoikost’ rezhushchego instrumenta (Hardness and Wear-Resistance of Cutting Tool), Moscow: Mashinostroenie, 1982.
11. Tverskoi, M.M., Avtomaticheskoe upravlenie rezhimami obrabotki detalei na stankakh s ChPU (Automatic Control of Regimes of Detail Treatment on Machine Tools with PNC), Moscow: Mashinostroenie, 1982.
12. Shul’ts, V.V., Forma estestvennogo iznosa detalei mashin i instrumenta (Form of Natural Wear of Machine and Tool Details), Leningrad: Mashinostroenie, 1990.
13. Granovskii, G.I. and Granovskii, V.G., Rezanie metallov: Uchebnik dlya mashinostr. i priborostr. spets. vuzov (Cutting of Metals: Handbook for Special Machine Engineering and Instrument Making Institutes), Moscow: Vyssh. Shkola, 1985.
14. Rogov, V.A., Fomin, E.V., and Fomin, A.V., Effectiveness of wear-resistant TiN and (TiZr)N coatings in face milling of low-temperature steel, Russ. Eng. Res., 2010, vol. 30, pp. 1180–1181.10.3103/S1068798X10110249 ↗
15. Liu, Z.Q., Ai, X., Zhang, H., Wang, Z.T., and Wan, Y., Wear patterns and mechanisms of cutting tools in high-speed face milling, J. Mater. Proc. Technol., 2002, vol. 129, pp. 222–226.10.1016/S0924-0136(02)00605-2 ↗
16. Gu, J., Barber, G., Tung, S., and Gu, R.J., Tool life and wear mechanism of uncoated and coated milling inserts, Wear, 1999, vol. 225–229, pp. 273–284.10.1016/S0043-1648(99)00074-5 ↗
17. Shashok, A.V., Kutyshkin, A.V., Frolov, E.A., and Kozhemyako, I.V., Prognosis of adhesion wear of blade cutting tool, Obrabotka Metallov: Tekhnologiya, Oborudovanie, Instrumenty, 2011, no. 1, pp. 23–26.
18. Koshin, A.A., Chaplygin, B.A., and Isakov, D.V., Adequacy of the operating conditions of abrasive grains, Russ. Eng. Res., 2011, vol. 31, pp. 1221–1226.10.3103/S1068798X11120161 ↗
19. Koshin, A.A., Chaplygin, B.A., and Isakov, D.V., The design of abrasive machining operations, Russ. Eng. Res., 2011, vol. 31, pp. 864–866.10.3103/S1068798X11090152 ↗
20. Rezaeizadeh, M., Fooladi, M., Powell, M.S., and Weerasekara, N.S., An experimental investigation of the effects of operating parameters on the wear of lifters in tumbling mills, Minerals Engineering, 2010, vol. 23, pp. 558–562.10.1016/j.mineng.2009.12.010 ↗
21. Guzeev, V.I., Batuev, V.A., and Surkov, I.V., Rezhimy rezaniya dlya tokarnykh i frezerno-rastochnykh stankov s chislovym programmnym upravleniem: Spravochnik, (Cuitting Regimes for turning and mill-boring machines with program numerical control), Guzeev, V.I., Ed., Moscow: Mashinostroenie, 2005.
22. Obshchemashinostroitel’nye normativy vremeni i rezhimov rezaniya dlya normirovaniya rabot, vypolnyaemykh na universal’nykh i mnogotselevykh stankakh s chislovym programmnym upravleniem: Chast’ II. Normativy rezhimov rezaniya (General Machine Engineering Standards for normalization of works executed on universal multipurpose machine-tools with program numerical control), Moscow: Ekonomika, 1990.
23. Erdakov, I.N. and Tkachev, V.M., Study of cast plate formation process by planned experiment method, Vestnik Yuzhno-Ural’skogo Gos. Univ. Ser. ‘Metallurgiya’, 2010, vol. 15, no. 34(210), pp. 46–49.
24. Spravochnik metallista: Spravochnik v 5-ti tomakh. Tom 2 (Metallist Handbook. Handbook in 5 vol. vol. 2) Rakhshtadt, A.G. and Brostrem, V.A., Eds., Moscow: Mashinostroenie, 1976.
25. Guzeev, V.I. and Pimenov, D.Yu., Cutting force in face milling with tool wear, Russ. Eng. Res., 2011, vol. 31, pp. 989–993.10.3103/S1068798X11090139 ↗
26. Pimenov, D.Yu., Guzeev, V.I., Pereverzev, P.P., and Vyboyshchik, A.V., Experimental study of cutting forces with due regard for rear surface wear at face milling, Spravochnik. Inzh. Zh., 2012, No. 4, pp. 41–44.
27. Pimenov, D.Yu., Guzeev, V.I., Koshin, A.A., and Pereverzev, P.P., Change of the stress state of the mill’s tooth back surface at face milling, Vestnik Mashinostroeniya, 2012, No. 7, pp. 78–80.
28. Pimenov, D.Yu., Guzeev, V.I. and Koshin, A.A., Influence of cutting conditions on the stress at tool’s rear surface, Russ. Eng. Res., 2011, vol. 31, pp. 1151–1155.10.3103/S1068798X11110207 ↗
29. Pimenov, D.Yu., Guzeev, V.I., and Koshin, A.A., Elastic displacement of a technological system in face milling with tool wear, Russ. Eng. Res., 2011, vol. 31, pp. 1105–1109.10.3103/S1068798X11110219 ↗
30. Pimenov, D.Yu., Guzeev, V.I., and Pashnyov, V.A., Specification of allowable wear of face-milling cutter for assurance of precision requirement, Vestnik Mashinostroeniya, 2012, no. 10, pp. 68–72.