Sintering, camber development of layer composites and a new method to eliminate or decrease camber
Source abstract
Abstract
Zinc–magnesium titanate dielectrics/nickel–zinc–copper ferrite layer composites were prepared by tape-casting technique combined with a uniaxial pressure shaping technique. The sintering and camber development of the composites were investigated. The results show that the difference of shrinkage in the later stages of sintering is the main cause of camber distortion. To eliminate or decrease the camber, a new method semi-fixed uniaxial pressure technique (SUP) was proposed. This method uses uniaxial pressures by which different radial densities can be introduced when one layer’s edge is clamped and the other is free while laminating two different layers. The results obviously show that the SUP technique can decrease the camber and the camber curvature shows an inverse quadratic dependence on the applied pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Bordia R K, Zuo R, Guillon O, Salamone S M and Rodel J 2006 Acta Mater. 54 11110.1016/j.actamat.2005.08.025 ↗
2. Cai P Z, Green D J and Messing G L 1997a J. Am. Ceram. Soc. 80 192910.1111/j.1151-2916.1997.tb03075.x ↗
3. Cai P Z, Green D J and Messing G L 1997b J. Am. Ceram. Soc. 80 194010.1111/j.1151-2916.1997.tb03076.x ↗
4. Chang J, Guillon O, Rodel J and Kang S 2007 J. Eur. Ceram. Soc. 27 312710.1016/j.jeurceramsoc.2007.01.003 ↗
5. Gao F, Yang Z P, Hou Y D and Tian C S 2003 J. Mater. Sci. 38 152310.1023/A:1022932817200 ↗
6. Green D J, Guillon O and Rodel J 2008 J. Eur. Ceram. Soc. 28 145110.1016/j.jeurceramsoc.2007.12.012 ↗
7. Hagymasi M, Roosen A, Karmazin R, Dernovsek O and Haas W 2005 J. Eur. Ceram. Soc. 25 206110.1016/j.jeurceramsoc.2005.03.011 ↗
8. Jean J H and Lee C H 1999 Jpn J. Appl. Phys. 38 350810.1143/JJAP.38.3508 ↗
9. Jiao X, Zhong C, Zhang S, Liu X and Li B 2010 J. Mater. Sci. 45 333110.1007/s10853-010-4352-4 ↗
10. Liu X C, Gao F, Zhao L and Tian C S 2007 J. Alloys Compd 436 28510.1016/j.jallcom.2006.07.027 ↗
11. Liu X C, Gao F, Liu J and Tian C S 2009a J. Alloys Compd 470 26910.1016/j.jallcom.2008.02.049 ↗
12. Liu X C, Gao F and Tian C S 2009b J. Alloys Compd 486 74310.1016/j.jallcom.2009.07.032 ↗
13. Liu X C 2012 J. Electroceram. 29 5610.1007/s10832-012-9738-z ↗
14. Merja T, Jari J and Heli J 2010 Compos. Struct. 93 17910.1016/j.compstruct.2010.05.025 ↗
15. Seo S H and Oh J H 1999 IEEE Trans. Magn. 35 341210.1109/20.800541 ↗
16. Zhou H, Wang H, Li K and Yao X 2008 J. Mater. Sci. 43 372510.1007/s10853-008-2572-7 ↗