Influence of Carbon-Containing Additives in the Composition of Copper-Based Friction Material on Boundary Friction in Mineral and Synthetic Oils
Source abstract
Abstract
This study provides the results of analyzing the influence of carbon-containing powder additives in the form of powders of fine GK-1 pencil graphite, GE-1 coarse graphite, and foundry coke fractions smaller than 63 and 100–200 μm on the setting and transfer of materials using mineral and synthetic oils. It is established that foundry coke powder allows for improving the resistance of material during seizure. Thus, an increase in the seizure load from 1.4 to 1.7 MPa for mineral oil and from 1.0 to 1.4 MPa for synthetic oil is registered at a sliding speed of 2 m/s. The use of finely dispersed pencil graphite as part of the friction material during friction in synthetic oil increases the speed during seizure; thus, an increase in speed up to 4 m/s is registered at a load of 1 MPa, while an increase in speed for pure 12% bronze is not higher than 2 m/s.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Dmitrovich, A.A., Leshok, A.V., Rogovoi, A.N., and Saroka, D.I., Composite friction materials: main types and requirements for them, in Poroshkovaya metallurgiya (Powder Metallurgy), Minsk: Belarusskaya Nauka, 2015, no. 38.
2. Leshok, A.V., Il’yushchenko, A.F., Dmitrovich, A.A., Rogovoi, A.N., and Maroka, D.I., Analysis of a steel disk surface running in tandem with the metal–ceramic friction material MK-5 under the conditions of boundary friction of a hydromechanical transmission, J. Frict. Wear, 2016, vol. 37, no. 2, pp. 160–164.10.3103/S1068366616020112 ↗
3. Arzamasov, B.N., Solov’eva, T.V., and Gerasimov, S.A., Spravochnik po konstruktsionnym materialam (Handbook on Construction Materials), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2005.
4. Kolesov, S.N. and Kolesov, I.S., Materialovedenie i tekhnologiya konstruktsionnykh materialov: Uchebnik dlya vuzov (Material Science and Technology of Construction Materials: Manual for Higher Education Institutions), Moscow: Vysshaya Shkola, 2007.
5. Kragel’skii, I.V., Trenie, iznashivanie i smazka: Spravochnik (Friction, Wear, and Lubrication: Handbook), in 2 vols., Kragel’skii, I.V. and Alisin, V.V., Eds., Moscow: Mashinostroenie, 1978.
6. Deryagin, B.V., Teoriya ustoichivosti kolloidov i tonkikh plenok (Theory of Stability of Colloids and Fine Films), Moscow: Nauka, 1986.
7. Myshkin, N.K. and Petrokovets, M.I., Trenie, smazka, iznos (Friction, Lubrication, and Wear), Moscow: Fizmatlit, 2013.
8. Koval’skii, B.I., Bezborodov, Yu.N., Fel’dman, L.A., and Malysheva, N.N., Thermo-oxidative stability of transmission oils, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2017, no. 6, pp. 200–210.
9. Berezin, K.G., Increasing the scuff resistance of the frictional contact of the worm friction pair, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Ivanovo, 2012.
10. Biryukov, V.P., Osnovy tribologii: Uchebnoe posobie (Fundamentals of Tribology. Manual), Moscow: Ross. Univ. Transp. (MIIT), 2019.
11. Kiparisov, S.S. and Libenson, G.A., Poroshkovaya metallurgiya (Powder Metallurgy), Moscow: Metallurgiya, 1980.