Effects of organic additives on microstructure and mechanical properties of porous Si3N4 ceramics
Source abstract
Abstract
Green bodies of porous Si3N4 ceramics were shaped by extrusion technique using different organic additives as binder during extrusion molding. Different porosity, microstructures and mechanical properties after the extrusion, drying, debinding and sintering stages were investigated. The solid slurry content of 70–75% and extrusion pressure of 0.5–1.0 MPa had played a decisive role in the smooth realization of extrusion molding. The porous Si3N4 ceramics were obtained with excellent properties using 4% hydroxypropyl methyl cellulose (HPMC) as binder and polyethylene glycol (PEG) of molecular weight, 1000, as plasticizer with a density of 1.91 g cm−3, porosity of 41.70%, three-point bending strength of 166.53 ± 20 MPa, fracture toughness of 2.45 ± 0.2 MPa m1/2 and Weibull modulus (m) of 20.75.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Bazant Z P 2004 Prob. Eng. Mech. 19 30710.1016/j.probengmech.2003.09.003 ↗
2. Corbin S F, Lee J and Qiao X 2001 J. Am. Ceram. Soc. 84 4110.1111/j.1151-2916.2001.tb00605.x ↗
3. Haslam J J, Beroth K E and Lange F F 2000 J. Eur. Ceram. Soc. 20 60710.1016/S0955-2219(99)00259-9 ↗
4. Isobe T, Tomita T, Kameshima Y, Nakajima A and Okada K 2006 J. Eur. Ceram. Soc. 26 95710.1016/j.jeurceramsoc.2004.11.015 ↗
5. Isobe T, Kameshima Y, Nakajima A and Okada K 2007 J. Eur. Ceram. Soc. 27 6110.1016/j.jeurceramsoc.2006.05.079 ↗
6. Kawai C and Yamakawa A 1997 J. Am. Ceram. Soc. 80 270510.1111/j.1151-2916.1997.tb03179.x ↗
7. Kaya C and Butler E G 2002 J. Eur. Ceram. Soc. 22 191710.1016/S0955-2219(01)00523-4 ↗
8. Lper A M 1995 Phase diagrams on advanced ceramics: chemical and metallurgical products II [C] (ed.) Y T Tseng (PA: Towanda) pp 127–128
9. Oh S T, Tajima K I, Ando M and Ohji T 2000 J. Am. Ceram. Soc. 83 131410.1111/j.1151-2916.2000.tb01380.x ↗
10. Raupp-Pereira F, Ribeiro M J, Segadaes A M and Labrincha J A 2007 J. Eur. Ceram. Soc. 27 233310.1016/j.jeurceramsoc.2006.07.015 ↗
11. Shigegaki Y, Brito M E, Hirao K, Toriyama M and Kanzaki S 1997 J. Am. Ceram. Soc. 80 49510.1111/j.1151-2916.1997.tb02856.x ↗
12. Tarì G, Ferreira J M F and Lyckfeldt O 1998a J. Eur. Ceram. Soc. 18 386
13. Tarì G, Fonseca A T and Ferreira J M F 1998b Br. Ceram. Trans. 97 259
14. Treischel C C and Emrich E W 1946 J. Am. Ceram. Soc. 29 12910.1111/j.1151-2916.1946.tb11566.x ↗
15. Weibull W 1951 J. Appl. Mech. 18 29310.1115/1.4010337 ↗
16. Yang J, Yang J F, Shan S Y and Gao J Q 2006 J. Am. Ceram. Soc. 89 384310.1111/j.1551-2916.2006.01294.x ↗
17. Yang J F, Ohji T and Niihara K 2000 J. Am. Ceram. Soc. 83 209410.1111/j.1151-2916.2000.tb01520.x ↗
18. Yang J F, Ohji T, Kanzaki S, Díaz A and Hampshire S 2002 J. Am. Ceram. Soc. 85 151210.1111/j.1151-2916.2002.tb00305.x ↗
19. Yang J F, Deng Z Y and Ohji T 2003a J. Eur. Ceram. Soc. 23 37110.1016/S0955-2219(02)00175-9 ↗
20. Yang J F, Zeng Y P, Ohji T, Kanzaki S and Zhang G J 2003b J. Ceram. Soc. Jpn 111 75810.2109/jcersj.111.758 ↗
21. Yu F L, Yang J F, Xue Y H, Gao J Q and Jin Z H 2008 J. Chin. Ceram. Soc. 36 1037
22. Zeng L K, Wang H and Luo M H 2006 Preparation and application of porous functional ceramics (Beijing: Chemical Industry Publishers) p. 95