Numerical simulation of thermal conditions in the oil-cooled friction multidisc clutch of a power-intensive wheel tractor. Part 1. Problem formulation
Source abstract
Abstract
Numerical study is performed of the effect of the inertial force parameters on the thermal conditions of a multidisc oil-cooled friction clutch of a rear power take-off shaft of a power-intensive wheel tractor. A system of differential equations is shown of the dynamics of slippage of the driven and driving disks when the clutch is actuated and it is solved numerically with the Runge-Kutt method. An initial boundary problem is formulated describing the thermal processes in the package of disks when friction heats the clutch; it is solved numerically with the finite elements method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Systems and Engineering · Hydraulic and Pneumatic Systems · Geotechnical and Geomechanical Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Flidlider, G.M., Thermal Stresses and Stability of “Fine” Friction Disks during Unsteady Friction, Trenie Iznos, 1981, vol. 2, no. 6, pp. 1050–1060.
2. Chichinadze, A.V., Problem of Assessing Heat Loading and Wear Resistance of Friction Disks of Hydromechanical Transmissions of Passenger Vehicles, Trenie Iznos, 1997, vol. 18, no. 6, pp. 766–771.
3. Gorodetskii, K.I., Yevtushik, O.V., and Sharipov, O.V., Forced Liquid Cooling of Disk Friction Gears and Tractors, Traktory Selkhozmash., 2000, no. 12, pp. 21–24.
4. Tarasik, V.P., Friktsionnye mufty avtomobil’nykh gidromekhanicheskikh peredach (Friction Clutches of Automobile Hydromechanical Transmissions), Minsk: Nauka i Tekhnika, 1973.
5. Ksenevich, I.P., Gus’kov, V.V., Bocharov, N.F., et al., Traktory. Proektirovanie i raschet (Tractors. Designing and Calculation), Ksenevich, I.P., Ed., Moscow: Mashinostroenie, 1991.
6. Sharipov, V.M., Konstruirovanie i raschet traktorov (Designing and Calculation of Tractors), Moscow: Mashinostroenie, 2004.
7. Balakin, V.A., Sergienko, V.P., Teplovye raschety tormozov i uzlov treniya (Thermal Calculations of Brakes and Tribounits), Gomel: Inst. Mekh. Met.-Polymer. Sistem Nats. Akad. Nauk Bel., 1999.
8. Carslaw, H.S. and Jaeger, J.C., Conduction of Heat in Solids, London: Oxford University, 1959.
9. Lykov, A.V., Teoriya teploprovodnosti (Heat Conductivity Theory), Moscow: Vysshaya Shkola, 1966.
10. Krylov, V.I. and Monastyrnii, P.I., Vychislitelnye metody. T. 2. (Computational Methods, 2 vols.), Moscow: Nauka, 1977.
11. Bathe, K.-J. Finite Element Procedures, New Jersey: Prentice-Hall, 1996.
12. Isakov, P.P., Ivanchenko, P.N., Shadrin, B.N., and Yegorov, A.D., Avtomatizatsiya raschetov tyagovodinamicheskikh kharakteristik promyshlennykh traktorov (Computerization of Calculation of Traction Dynamic Characteristics of Industrial Tractors), Leningrad: Mashinostroenie, 1988.
13. Vernigora, V.A. and Solonskii, A.S., Perekhodnye rezhimy traktornykh agregatov (Transient Modes of Tractor Units), Moscow: Mashinostroenie, 1983.
14. Vuchkov, I. Boyadzhieva, L., and Solakov, E., Prikladnoy lineinyi analiz (Application Linear Regression Analysis), Moscow: Finansy i Statistika, 1987.
15. Popov, V.I., Teploobmen raz’emnykh i neraz’emnykh soedinenii (Heat Exchange in the Contact Zone of Detachable and Non-Detachable Connections), Moscow: Enegriya, 1971.
16. Shlykov, Yu.P, Ganin, E.A., and Tsarevskii, S.N., Kontaktnoe termicheskoe soprotivlenie (Contact Thermal Resistance), Moscow: Enegriia, 1977.
17. Wong, H. Y., Handbook of Essential Formulae and Data on Heat Transfer for Engineers, London: Longman, 1977.
18. Brodskii, V.Z., Vvedenie v faktornoe planirovanie eksperimenta (Introduction into Factorial Experiment Designing), Moscow: Nauka, 1976.