Reduction of wear of crankshaft bearings of V-8 engines by compensating the total unbalanced mass of the crank gear mechanism parts
Source abstract
Abstract
The work presents the theoretical principles of how to compensate the total mass of crank gear parts and to eliminate the auxiliary free total unbalanced moment emerging when reconditioned or improved pistons, connecting rods, piston rings, and conrod liners are installed in V-8 engines. It is achieved by increasing the mass of the counterweights and the distance between the center of gravity and the axis of rotation, by altering the angles of their arrangement, the mass-geometrical parameters, and the design of the sump plugs in the conrod necks, and by creating an engine-plane-directed imbalance correction. These methods enable compensation of the total unbalanced mass in order to eliminate the above-mentioned moment; they make it possible to balance the crankshaft, improve durability, and reduce the vibration and noise of the V-8 engine.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering Diagnostics and Reliability · Engineering Technology and Methodologies · Mechanical Systems and Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Nazarov, A.D., Theoretical Basis of Determination and Estimation of Some Characteristics of Reliability of Motor and Tractor Engines, Gruzovik &, 2007, no. 11, pp. 23–26.
2. Nazarov, A.D., Estimation of Wear and Irregularity of Deterioration of Work Surface of Engine Crankshaft Main Necks, Gruzovik &, 2006, no. 10, pp. 18–21.
3. Nazarov, A.D., Nadezhnost’ i remont mashin, (Reliability and Repair of Machines), Ashkhabad: Ylym, 1992.
4. Babkin, G.F., Diskin, M.E., Karavaev, B.I., et al., Avtomobil’nyi dvigatel’ ZIL-130 (ZIL-130 Automobile Engine), Moscow: Mashinostroenie, 1973.
5. Nazarov, A.D., Disbalansy avtotraktornykh dvigatelei: opredelenie i normirovanie (Imbalances of Motor and Tractor Engines: Determination and Regulation), Moscow: Mashinostroenie, 1992.
6. Nazarov, A.D., Increasing of Longevity and Improvement of Vibroacoustical Characteristics of Engines, Vestn. Mashinostr., 2002, no. 7, pp. 7–11.
7. Nazarov, A.D., Effect of Increasing of Part Mass of Crank-Connected Cronrod Mechanism on Deterioration Characteristics of Crankshaft Bearings and Engine Resource, Trenie Iznos, 1995, vol. 16, no. 2, pp. 227–237.
8. Nazarov, A.D., Massogeometric Parameters of Crankshaft Counterweignts and Engine Equilibrium, Vestn. Mashinostr., 2010, no. 6, pp. 28–38.
9. Borisov, V.I., Gutkin, S.G., Irkhin, I.V., et al., Avtomobil’ GAZ-53A (GAZ-53A Automobile), Moscow: Mashinostroenie, 1973.
10. Avtomobil’ KamAZ (KamAZ Automobile), Pergament, L.P., Ed., Moscow: Mashinostroenie, 1978.
11. Arkhangel’skii, V.M., Vikhert, M.M., Voinov, A.N., et al., Avtomobil’nye dvigateli (Automobile Engines), Moscow: Mashinostroenie, 1977.
12. Popyk, K.G., Dinamika avtomobil’nykh i traktornykh dvigatelei, (Dynamics of Automobile and Tractor Engines), Moscow: Vysshaya Shkola, 1970.
13. Vzorov, B.A., Adamovich, A.V., Arabyan, A.G., et al., Traktornye dizeli: Spravochnik (Tractor Diesels: A Handbook), Moscow: Mashinostroenie, 1981.
14. Chistyakov, V.K., Dinamika porshnevykh i kombinirovannykh dvigatelei vnutrennego sgoraniya, (Dynamics of Piston and Combined Explosion Engines), Moscow: Mashinostroenie, 1989.
15. Nazarov, A.D., Permissible Summary Imbalanced Part Mass of Crank-Connected Cronrod Mechanism of New Engines and after Complete Overhaul, Gruzovik &, 2008, no. 1, pp. 29–34.
16. Nazarov, A.D., Theoretical Basis of Estimation of Stress Loading of Crankshaft Main Bearings in V-8 Engines, Vestn. Mashinostr., 2007, no. 10, pp. 3–11.