The Methodology for Calculating the Hydrodynamic Characteristics of a Mechanical Seal with Leakage Steam Formation
Source abstract
Abstract
This paper presents the numerical methods for calculating the hydrodynamic characteristics of a mechanical seal, taking into account the possibility of a phase transition in its gap. In the numerical model, the solutions are used for the flow of both liquid and gas in the microgap of compaction obtained using the finite volume method. Regularities of the influence of the size and taper of the gap, the depth of the microgrooves, the pressure drop and the value of the saturated vapor pressure on the hydrodynamic characteristics of the seal are revealed. A method has been developed for calculating leaks, the stiffness of the lubricant layer, and the friction power in the seal gap, taking into account vaporization and thermal deformations of the sealing rings. Recommendations for the selection of the geometric parameters of the seal are offered. The cause of pulsating seal leakage has been identified. The developed technique is applicable both for cryogenic liquids and for water.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Lubricants and Their Additives · Fluid Dynamics and Mixing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Bruce, R.W., Handbook of Lubrication and Tribology: Theory and Design, London: CRC Press, 2012, 2nd ed.10.1201/b12265 ↗
2. Lebeck, A.O., Experiments and modeling of zero leakage backward pumping mechanical face seals, Tribol. Trans., 2008, vol. 51, no. 4, pp. 389–395.10.1080/10402000802121650 ↗
3. Falaleev, S.V., Bondarchuk, P.V., and Tisarev, A.Yu., Carbon face seals for aircraft engines, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 302, no. 1, art. ID 012004.10.1088/1757-899X/302/1/012004 ↗
4. Ovchar, Z.N., Mashkov, Yu.K., and Prokudina, N.A., Improvement of design of face seals of oil-transfer pumps based on analysis of hydromechanical and thermal processes, J. Frict. Wear, 2006, vol. 27, no. 2, pp. 56–61.
5. Müller, H.K. and Nau, B.S., Fluid Sealing Technology: Principles and Applications, New York: Marcel Dekker, 1998.
6. Chinnov, E., Ron’shin, F., and Kabov, O., Regimes of two-phase flow in micro- and minichannels (review), Thermophys. Aeromech., 2015, vol. 22, no. 3, pp. 265–284.10.1134/S0869864315030014 ↗
7. Gerasimov, A.A., Lepeshinskii, Yu.Ya., Ponomarev, Yu.N., Fedorushchenko, A.A., and Naugol’nov, V.P., Analysis of hydrostatic seals operating in the mode of steam generation in the end gap, Trudy VI Nauchno-tekhnicheskoi konferentsii “Uplotneniya i vibratsionnaya nadezhnost’ tsentrobezhnykh mahsin” (Proc. VI Sci.-Tech. Conf. “Seals and Vibration Reliability of Centrifugal Machines”), Sumy: Sumsk. Fil., Khar’k. Politekh. Inst., 1991, pp. 24–29.
8. Müller, H.K. and Waidner, P., Niederdruck-Gleitringdichtungen—Vorgänge im Dichtspalt, Konstruktion, 1988, vol. 40, pp. 67–72.
9. Falaleev, S.V., Techniques for calculating the hydrodynamic characteristics of mechanical face seals with gaps of complex forms, J. Frict. Wear, 2015, vol. 36, no. 2, pp. 177–183.10.3103/S1068366615020063 ↗
10. Young, L.A., Key, B., Philipps, R., and Svendsen, S., Mechanical seals with laser machined wavy SiC faces for high duty boiler circulation and feedwater applications, Lubr. Eng., 2003, vol. 59, no. 4, pp. 30–39.