Interfacial stick-slip transition in hydroxyapatite filled high density polyethylene composite
Source abstract
Abstract
Effect of filler addition and temperature on the stick-slip transition in high density polyethylene melt was studied. Results showed that shear stresses corresponding to stick-slip transition increases with the addition of filler. Increase in temperature also increases the shear stresses for stick-slip transition. The features of the flow curves of composites and that of unfilled system remain identical. Filler addition lowers the shear rate at which the transition occurs. The composite extrudate did not show characteristic extrudate distortions associated with the unfilled polymer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rheology and Fluid Dynamics Studies · Polymer crystallization and properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Bagley E B 1957J. Appl. Phys. 28 62410.1063/1.1722814 ↗
2. Bagley E B, Cabbot I M and West DC 1958J. Appl. Phys. 29 10910.1063/1.1722930 ↗
3. Blyler L L and Hart A C 1970Polym. Eng. Sci. 10 19310.1002/pen.760100402 ↗
4. den Doelder C F J, Koopmans R J and Molenaar J 1998J. Non-Newtonian Fluid Mech. 79 50310.1016/S0377-0257(98)00117-7 ↗
5. Cogswell F N 1981Polymer melt rheology, a guide for industrial practice (London: George Godwin Ltd) pp 27–28
6. Denn M M 2001Annu. Rev. Fluid Mech. 33 26510.1146/annurev.fluid.33.1.265 ↗
7. Dornhoffer J L 1998Laryngoscope 108 53110.1097/00005537-199804000-00013 ↗
8. Downes R N, Vardy S, Tanner K E and Bonfield W 1991Bioceramics (eds) W Bonfield, G W Hastings and K E Tanner (Oxford: Butterworth Heinemann)Vol. 4, pp 239–24610.1016/B978-0-7506-0269-3.50036-0 ↗
9. Hatzikiriakos S G and Dealy J M 1992J. Rheol. 36 84510.1122/1.550320 ↗
10. Kay D, Carreau P J, Lafleur P G, Robert L and Vergnes B 2003Polym. Eng. Sci. 43 7810.1002/pen.10007 ↗
11. Li H, Hürlimann H P and Meissner J 1986Polym. Bull. 15 83
12. Lupton J M and Regester J W 1965Polym. Eng. Sci. 5 23510.1002/pen.760050406 ↗
13. Münstedt H, Schmidt M and Wassner E 2000J. Rheol. 44 41310.1122/1.551092 ↗
14. Piau J M, El Kissi N, Toussaint F and Mezghani A 1995Rheol. Acta 34 4010.1007/BF00396053 ↗
15. Ramamurthy A V 1986J. Rheol. 30 33710.1122/1.549852 ↗
16. Robert L, Vergnes B and Demay Y 2000J. Rheol. 44 118310.1122/1.1289284 ↗
17. Robert L, Vergnes B and Demay Y 2003J. Non-Newtonian Fluid Mech. 112 2710.1016/S0377-0257(03)00059-4 ↗
18. Tanner K E, Downes R N and Bonfield W 1994Br. Ceram. Trans. 93 104
19. Wang S Q 1999Adv. Polym. Sci. 138 22710.1007/3-540-69711-X_6 ↗
20. Wang S Q and Drda P A 1996aMacromolecules 29 262710.1021/ma950898q ↗
21. Wang S Q and Drda P A 1996bMacromolecules 29 411510.1021/ma951512e ↗
22. Wang S Q, Drda P A and Inn Y W 1996J. Rheol. 40 87510.1122/1.550766 ↗
23. Yilmazer U 1998SPEANTEC Tech. Papers 34 1608