Wear of a Flexible Abrasive Tool
Source abstract
Abstract
The paper discusses the results of a tool wear study included in evaluating the operational characteristics of a flexible abrasive tool (FAT). A correlation is established between a FAT’s wear values and various grinding conditions. The mechanisms of abrasive grain wear and degradation of the working layer of a FAT are studied. Experimental proof is obtained for choosing the optimal characteristics for the most common grinding operations in evaluating the quality of flexible abrasive tools for the purpose of developing usage recommendations and FAT machinability charts for various materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Engineering Technology and Methodologies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Huai, W., Tang, H., Shi, Y., and Lin, X., Prediction of surface roughness ratio of polishing blade of abrasive cloth wheel and optimization of processing parameters, Int. J. Adv. Manuf. Technol., 2017, vol. 90, nos. 1–4, pp. 699–708. https://doi.org/10.1007/s00170-016-9397-3.10.1007/s00170-016-9397-3 ↗
2. Zhao, T., Shi, Y., Lin, X., Duan, J., Sun, P., and Zhang, J., Surface roughness prediction and parameters optimization in grinding and polishing process for IBR of aero-engine, Int. J. Adv. Manuf. Technol., 2014, vol. 74, nos. 5–8, pp. 653–663. https://doi.org/10.1007/s00170-014-6020-3.10.1007/s00170-014-6020-3 ↗
3. Axinte, D.A., Kritmanorot, M., Axinte, M., and Gindy, N.N.Z., Investigations on belt polishing of heat-resistant titanium alloys, J. Mater. Process. Technol., 2005, vol. 166, no. 3, pp. 398–404.https://doi.org/10.1016/j.jmatprotec.2004.08.030.10.1016/j.jmatprotec.2004.08.030 ↗
4. Li, H., Li, X., Tian, C., Yang, X., Zhang, Y., Liu, X., and Rong, Y., The simulation and experimental study of glossiness formation in belt sanding and polishing processes, Int. J. Adv. Manuf. Technol., 2017, vol. 90, nos. 1–4, pp. 199–209. https://doi.org/10.1007/s00170-016-9328-3.10.1007/s00170-016-9328-3 ↗
5. Xiao, G. and Huang, Y., Equivalent self-adaptive belt grinding for the real-R edge of an aero-engine precision-forged blade, Int. J. Adv. Manuf. Technol., 2016, vol. 83, nos. 9–12, pp. 1697–1706. https://doi.org/10.1007/s00170-015-7680-3.10.1007/s00170-015-7680-3 ↗
6. Arunachalam, A.P.S., Idapalapati, S., and Subbiah, S., Multi-criteria decision making techniques for compliant polishing tool selection, Int. J. Adv. Manuf. Technol., 2015, vol. 79, nos. 1–4, pp. 519–530. https://doi.org/10.1007/s00170-015-6822-y.10.1007/s00170-015-6822-y ↗
7. Hou, B., Wang, Y., Wang, F., Ji, Z., and Liu, H., Research on belt grinding for marine propeller blade based on the second-order osculation, Int. J. Adv. Manuf. Technol., 2015, vol. 80, nos. 9–12, pp. 1855–1862. https://doi.org/10.1007/s00170-015-7157-4.10.1007/s00170-015-7157-4 ↗
8. Zhu, D., Luo, S., Yang, L., Chen, W., Yan, S., and Ding, H., On energetic assessment of cutting mechanisms in robot-assisted belt grinding of titanium alloys, Tribol. Int., 2015, vol. 90, pp. 55–59. https://doi.org/10.1016/j.triboint.2015.04.004.10.1016/j.triboint.2015.04.004 ↗
9. Bigerelle, M., Gautier, A., Hagege, B., Favergeon, J., and Bounichane, B., Roughness characteristic length scales of belt finished surface, J. Mater. Process. Technol., 2009, vol. 209, no. 20, pp. 6103–6116. https://doi.org/10.1016/j.jmatprotec.2009.04.013.10.1016/j.jmatprotec.2009.04.013 ↗
10. Novoselov, Y., Bratan, S., and Bogutsky, V., Analysis of relation between grinding wheel wear and abrasive grains wear, Procedia Eng., 2016, vol. 150, pp. 809–814. https://doi.org/10.1016/j.proeng.2016.07.116.10.1016/j.proeng.2016.07.116 ↗
11. Kozlov, A.M., Kozlov, A.A., and Vasilenko, Y.V., Modeling a cylindrical surface machined by a non-circular face tool, Procedia Eng., 2016, vol. 150, pp. 1081–1088. https://doi.org/10.1016/j.proeng.2016.07.218.10.1016/j.proeng.2016.07.218 ↗
12. Shatko, D.B., Lyukshin, V.S., and Bakumenko, V.N., Performance potential of grinding tools on flexible backing produced of grains with the controlled form, IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 142, no. 1, art. ID 012082. https://doi.org/10.1088/1757-899X/142/1/012082.10.1088/1757-899X/142/1/012082 ↗
13. Syreyshchikova, N.V. and Pimenov, D.Yu., Quality assessment of emery cloth-based abrasive tool using elasticity technological parameter, Procedia Eng., 2017, vol. 206, pp. 1155–1160. https://doi.org/10.1016/j.proeng.2017.10.610.10.1016/j.proeng.2017.10.610 ↗
14. Guzeev, V.I. and Syreishchikov, A.A., Complex of operational parameters for evaluation of performance of grinding belts, Materialy regional’noi nauchno-tekhnicheskoi konferentsii “Povyshenie effektivnosti tekhnologicheskikh protsessov izgotovleniya detalei mashin” (Proc. Reg. Sci.-Tech. Conf. “Improvement of Production Processes of Machine Parts”), Kurgan: Kurgan. Gos. Univ., 1999, pp. 59–62.