journal article·2004-08

Oxidation behaviour of the near α-titanium alloy IMI 834

K. V. Sai Srinadh, Vakil Singh

Bulletin of Materials Science· Volume 27· Issue 4
Publisher page

Abstract

Oxidation behaviour of the near α-titanium alloy IMI 834 was investigated over a range of te m- peratures, from 600-800°C, in air. Specimens were solution-treated in the α + β and β β phase fields for 1 h and 1/2 h, respectively and cooled in air to room temperature. The solution treated samples were subjected to st a- bilization treatment at 700°C for 2 h, followed by cooling in air. Oxidation behaviour of these samples was studied from 600-800°C in air, for 50 h. The morphology of the scales formed was examined by SEM and the phases present in the scales were characterized by X -ray diffraction. While there was little oxidation at 600°C, the rate of oxidation increased at higher temperatures. In general, the rate of oxidation was found to be more in the α + β treated condition than that in the β treated one. The results are discussed in terms of the chara c- teristics of the oxide film formed under different conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Andreeva N 2003Corrosion resistance of titanium (USA: Titanium Metals Corporation) (Timet.com)
2. Bania P J 1988Low temperature oxidation of selected titanium alloys, Proc. sixth world conf. on titanium (Les Ulis: Societe Francaise de Metallurgie) p. 825
3. Becker S, Rahmel A, Schorr M and Schutze M 1992Oxidation Metals 38 42510.1007/BF00665663 ↗
4. Champin B 1980J. Less Common Met. 69 16310.1016/0022-5088(80)90052-1 ↗
5. Coddet C, Ramoul K, Chaze and Beranger G 1980Oxidation of titanium base alloys for application in turbines, Proc. 4th world conf. on titanium (Warrendale: The Metallurgical Society of AIME) p. 2755
6. Holt-Walton and Hill 2002 Tatanium alloys for aero engine and air frame applications, An engineers resource, Azom.com
7. Leyens M, Peters M and Kaysser W A 1996Mater. Sci. & Technol. 12 21310.1179/mst.1996.12.3.213 ↗
8. Liu Z and Welsch G 1988Met. Trans. A19 52710.1007/BF02649267 ↗
9. Magdalena M 1998 Kinetic behaviour of the titanium alloys Ti6Al4V and Ti6A15Zr0.5Mo0.25Si in air and oxygen at a temperature range of 400–600°C, Summary report
10. Simon D, Devillers B and Bardolle J 1980Study of the oxidation of titanium by microgravimetry and electron spectroscopy at elevated temperatures and low pressures, Proc. 4th world conf. on titanium (Warrendale: The Metallurgical Society of AIME) p. 2859
11. Shimizu T, Iikubo T and Isobe S 1992Mater. Sci. & Engg. A153 60210.1016/0921-5093(92)90258-3 ↗
12. Wiedemann K E, Shenoy R N and Unnam J 1987Met. Trans. A18 150310.1007/BF02646662 ↗
13. Zhang Erlin, Zeng Gang and Zeng Songyan 2002Scripta Materialia 46 81110.1016/S1359-6462(02)00081-7 ↗