Severe wear behaviour of alumina balls sliding against diamond ceramic coatings
Source abstract
Abstract
At present alumina is the most widely used bio-ceramic material for implants. However, diamond surface offers very good solid lubricant for different machinery, equipment including biomedical implants (hip implants, knee implants, etc.), since the coefficient of friction (COF) of diamond is lower than alumina. In this tribological study, alumina ball was chosen as the counter body material to show better performance of the polycrystalline diamond (PCD) coatings in biomedical load-bearing applications. Wear and friction data were recorded for microwave plasma chemical vapour deposition (MWCVD) grown PCD coatings of four different types, out of which two samples were as-deposited coatings, one was chemo-mechanically polished and the other diamond sample was made free standing by wet-chemical etching of the silicon wafer. The coefficient of friction of the MWCVD grown PCD against Al2O3 ball under dry ambient condition was found in the range of 0.29–0.7, but in the presence of simulated body fluid, the COF reduces significantly, in the range of 0.03–0.36. The samples were then characterized by Raman spectroscopy for their quality, by coherence scanning profilometer for surface roughness and by electron microscopy for their microstructural properties. Alumina balls worn out (14.2 × 10−1 mm3) very rapidly with zero wear for diamond ceramic coatings. Since the generation of wear particle is the main problem for load-bearing prosthetic joints, it was concluded that the PCD material can potentially replace existing alumina bio-ceramic for their better tribological properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Orthopaedic implants and arthroplasty · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. May P W 2000 Philosophical Transactions of the Royal Society A 358 47310.1098/rsta.2000.0542 ↗
2. Bhushan B, 2001 (Boca Raton, Florida: CRC Press LLC) Vol 1 and 2
3. Gao G, Cannara R J, Carpick R W and Harrison J A 2007 Langmuir 23 539410.1021/la062254p ↗
4. Gao G T, Mikulski P T and Harrison J A 2002 J. Am. Chem. Soc. 124 720210.1021/ja0178618 ↗
5. Mathew M T, Srinivasa Pai P, Pourzal R, Fischer A and Wimmer M A 2009 Adv. Tribol. 2009 1210.1155/2009/250986 ↗
6. Bandorf R, Paulkowski D M, Schiffmann K I and Küster R L A 2008 J. Phys. Condens. Matter 20 35401810.1088/0953-8984/20/35/354018 ↗
7. Field J E 1992 The Properties of Natural and Synthetic Diamond (London: Academic Press)
8. Booth L, Catledge S A, Nolen D, Thompson R G and Vohra Y K 2011 Materials 4 85710.3390/ma4050857 ↗
9. Clem W C, Chowdhury S, Catledge S A, Weimer J J, Shaikh F M and Hennessy K M 2008 Biomaterials 29 346110.1016/j.biomaterials.2008.04.045 ↗
10. Rezek B, Michalíková L, Ukraintsev E, Kromka A and Kalbacova M 2009 Sensors 9 354910.3390/s90503549 ↗
11. Amaral M, Gomes P S, Lopes M A, Santos J D, Silva R F and Fernandes M H 2009 Acta Biomater. 5 75510.1016/j.actbio.2008.08.015 ↗
12. Jakubowski W, Bartosz G, Niedzielski P, Szymanski W and Walkowiak B 2004 Diam. Relat. Mater. 13 176110.1016/j.diamond.2004.03.003 ↗
13. Specht C G, Williams O A, Jackman R B and Schoepfer R 2004 Biomaterials 25 407310.1016/j.biomaterials.2003.11.006 ↗
14. Wood R J K, Surface Engineering and Tribology Group, University of Southampton, SO17 1BJ, UK
15. Miyoshi K, National Aeronautics and Space Administration, Lewis Research Center, NASA Technical Memorandum 106759
16. Bull S J 1995 Diam. Relat. Mater. 4 82710.1016/0925-9635(94)05325-1 ↗
17. Liu E, Blanpain B and Celis J P 1996 Diam. Relat. Mater. 5 64910.1016/0925-9635(95)00360-6 ↗
18. Abreu C S, Amaral M, Fernandes A J S, Oliveira F J, Silva R F and Gomes J R 2006 Diam. Relat. Mater. 15 73910.1016/j.diamond.2005.10.042 ↗
19. Xinchun C, Zhijian P, Xiang Y, Zhiqiang F, Wen Y and Chengbiao W 2011 Appl. Surf. Sci. 257 318010.1016/j.apsusc.2010.10.136 ↗
20. Erdemir A, Fenske G R, Krauss A R, Gruen D M, Mccauley T and Csencsits R T 1999 Surf. Coat. Technol. 120 56510.1016/S0257-8972(99)00443-0 ↗
21. Plano L S, http://www.dtic.mil/dtic/tr/fulltext/u2/a220265.pdf , last accessed on 16 July 2015
22. Takeno T, Komoriya T, Nakamori I, Miki H, Abe T, Uchimoto, T and Takagi T 2005 Diam. Relat. Mater 14 211810.1016/j.diamond.2005.08.034 ↗
23. Mallik A K, Shivashankar S A and Biswas S K 2009 Sadhana 34 81110.1007/s12046-009-0047-4 ↗
24. Bhushan B, Subramaniam V V, Malshe A, Gupta B K and Juai R 1993 J. Appl. Phys. 74 417410.1063/1.354421 ↗
25. Luo Shenq Y, Kuo Jui K, Brian Y, Sung James C, Dai Chuang W and Tsai T J 2001 Mater. Chem. Phys. 72 13310.1016/S0254-0584(01)00422-9 ↗
26. Skopp A and Klaffke D 1998 Surf. Coat. Technol. 98 102710.1016/S0257-8972(97)00224-7 ↗
27. Grögler T, Franza A, Klaffke D, Rosiwal S M and Singer R F 1998 Diam. Relat. Mater. 7 134210.1016/S0925-9635(98)00202-7 ↗
28. Mahmud K A H A, Kalam M A, Masjuki H H, Mobarak H M and Zulkifli N W M 2015 Crit., Rev. Solid State Mater. Sci. 40 9010.1080/10408436.2014.940441 ↗
29. Radhika R, Kumar N, Kozakov A T, Sankaran K J, Dash S, Tyagi A K, Tai N H and Lin I N 2014 Diam. Relat. Mater. 48 610.1016/j.diamond.2014.06.005 ↗
30. Jianyi C and Xipeng X 2014 Int. J. Adv. Manuf. Technol. 71 157910.1007/s00170-013-5583-8 ↗
31. Mallik A K, Bysakh S, Dutta S and Basu D 2014 Sadhana 39 95710.1007/s12046-014-0265-2 ↗
32. Mallik A K, Pal K S, Dandapat N, Guha B K, Datta S and Basu D 2012 Diam. Relat. Mater. 30 5310.1016/j.diamond.2012.10.001 ↗
33. MaJ, PhD Thesis, 2008 University of Bristol, Department of Chemistry 21
34. Timothy G, Asmussen J, Asmussen J, D K Reinhard (eds.), 2002 Diamond Films Handbook, Chapter 710.1201/9780203910603 ↗
35. Cheng C Y, Tsai H Y, Wu C H, Liu P Y, Hsieh C H and Chang Y Y 2005 Diam. Relat. Mater. 14 62210.1016/j.diamond.2004.12.055 ↗
36. Thomas E L H, Nelson G W, Mandal S, Foord J S and Williams O A 2014 Carbon 68 47310.1016/j.carbon.2013.11.023 ↗
37. Mallik A K, Bysakh S, Pal K S, Dandapat N, Guha B K, Datta S and Basu D 2013 Indian J. Eng. Mater. Sci. 20 522
38. Bergman L and Nemanich R J 1996 Annu. Rev. Mater. Sci. 26 55110.1146/annurev.ms.26.080196.003003 ↗
39. Yoshikawa M, Katagiri G, Ishida H, Ishitani A, Ono M and Matsmura K 1989 Appl. Phys. Lett. 55 260810.1063/1.101951 ↗
40. Hayes W and Loudon R 1978 (New York: Wiley)
41. Pickard C D O, Davis T J, Wang W N and Steeds J W 1998 Diam. Relat. Mater. 7 23810.1016/S0925-9635(97)00262-8 ↗
42. Erasmus R M, Comins J D, Mofokeng V and Martin Z 2011 Diam. Relat. Mater. 20 90710.1016/j.diamond.2011.03.018 ↗
43. Nibennanoune Z, Georg D, Antoni F, Ahzi S, Ruch D, Gracio J and Remond Y 2012 Diam. Relat. Mater. 22 10510.1016/j.diamond.2011.12.023 ↗
44. Ali N, Neto V F, Mei S, Cabral G, Kousar Y, Titus E, Ogwu A S, Misra D S and Gracio J 2004 Thin Solid Films 469 15410.1016/j.tsf.2004.08.074 ↗
45. Mallik A K, Dandapat N, Chakraborty S, Mandal A K, Ghosh J, Unnikrishnan M, Bysakh S and Balla V K 2014 Proc. Appl. Ceram. 8 6910.2298/PAC1402069M ↗
46. Johnston C, Crossley A, Jones A M, Chalker P R, Cullen F L and Buckley-Golder I M 1991 J. de Physique IV 02 931
47. Holmberg K and Matthews A 1994 Coatings Tribology–Properties, Techniques and Applications in Surface Engineering (Amsterdam: Elsevier) Chapter 1
48. Mallik A K, Mendes J C, Rotter S Z and Bysakh S 2014 Adv. Ceram. Sci. Eng. 3 3610.14355/acse.2014.03.005 ↗
49. Abreu C S, Amaral M, Oliveira F J, Gomes J R and Silva R F 2009 Diam. Relat. Mater. 18 27110.1016/j.diamond.2008.08.016 ↗
50. Persson B N J 1998 Nanosci. Technol. Series 92