Effect of high heating rate on thermal decomposition behaviour of titanium hydride (TiH2) powder in air
Source abstract
Abstract
DTA and TGA curves of titanium hydride powder were determined in air at different heating rates. Also the thermal decomposition behaviour of the aforementioned powder at high heating rates was taken into consideration. A great breakthrough of the practical interest in the research was the depiction of the P H2-time curves of TiH 2 powder at various temperatures in air. In accordance with the results, an increase in heating rate to higher degrees does not change the process of releasing hydrogen from titanium hydride powder, while switching it from internal diffusion to chemical reaction. At temperatures lower than 600 °C, following the diffusion of hydrogen and oxygen atoms in titanium lattice, thin layers TiH x phase and oxides form on the powder surface, controlling the process. On the contrary, from 700 °C later on, the process is controlled by oxidation of titanium hydride powder. In fact, the powder oxidation starts around 650 °C and may escalate following an increase in the heating rate too.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Thermal and Kinetic Analysis · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Bhosle V, Gaburaj E G, Miranova M and Salama K 2003 Mater. Eng. A356 19010.1016/S0921-5093(03)00117-5 ↗
2. Bliznakov S, Lefterov E, Bozukov L, Popov A and Andreev P 2004 Techniques for characterization of hydrogen absorption/desorption in metal hydride alloys, Proceedings of the international workshop “advanced techniques for energy sources, investigation and testing” (Sofia, Bulgaria)
3. Bobet J L, Even C and Quenisset J M 2003 J. Alloys Compd. 348 24710.1016/S0925-8388(02)00794-6 ↗
4. Castro F and Meyer G 2002 J. Alloys Compd. 330 5910.1016/S0925-8388(01)01625-5 ↗
5. Criado J M and Ortega A 1987 Acta Metall. 35 171510.1016/0001-6160(87)90117-9 ↗
6. Duarte I and Banhart J 2000 Acta Mater. 48 234910.1016/S1359-6454(00)00020-3 ↗
7. Gabis J E, Voit A P, Evard E A, Zaika Yu V, Chernov I A and Yartys V A 2005 J. Alloys Compd. 404 31210.1016/j.jallcom.2005.02.090 ↗
8. Galwey A K and Brown M E 1995 Proc. R. Soc. Lond. A450 51010.1098/rspa.1995.0097 ↗
9. Kennedy A R 2002 Scripta Materiala 47 76310.1016/S1359-6462(02)00281-6 ↗
10. Kennedy A R and Lopez V H 2003 Mater. Sci. Eng. A357 25810.1016/S0921-5093(03)00211-9 ↗
11. Kissinger H E 1956 J. Research National Bureau Standards 57 21710.6028/jres.057.026 ↗
12. Kissinger H E 1957 Anal. Chem. 29 170210.1021/ac60131a045 ↗
13. Lehmhus D and Rausch G 2004 Adv. Eng. Mater. 6 31310.1002/adem.200300572 ↗
14. Matijasevic B, Fiechter S, Zizak I, Gorke O, Wanderka N, Schubert-Bischoff P and Banhart J 2004 Decomposition behaviour of as-received and oxidized TiH 2 powder, Powder Metallurgy World Congress (Vienna: European Powder Metallurgy Association)
15. Matijasevic-Lux B, Banhart J, Fiechter S, Gorke O and Wanderka N 2006 Acta Mater. 54 188710.1016/j.actamat.2005.12.012 ↗
16. Meisel L V and Cote P J 1983 Acta Mater. 31 105310.1016/0001-6160(83)90201-8 ↗
17. Miyoshi T, Itoh M, Akiyama S, and Kitahara A 2000 Adv. Eng. Mater. 2 17910.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G ↗
18. Padurets L N, Dobrokhotova Zh V and Shilov A L 1999 Inter. J. Hydrog. Energy 24 15310.1016/S0360-3199(98)00047-0 ↗
19. Sánchez-Jiménez P E, Criado J M and Pérez-Maqueda L A 2008 J. Therm. Anal. Calorim. 94 42710.1007/s10973-008-9200-2 ↗
20. Sandim H, Morante B and Suzuki P 2005 Mater. Res. 8 29310.1590/S1516-14392005000300012 ↗
21. Setoyama D, Matsunaga J, Ito M, Muta H, Kurosaki K, Uno M and Yamanaka S 2005 J. Nucl. Mater. 344 29810.1016/j.jnucmat.2005.04.059 ↗
22. Tsuchiya B, Teshigawara M, Nagata S, Konashi K, Yasuda R, Nishino Y, Nakagawa T and Yamawaki M 2002 Nuclear Inst. Meth. Phys. Res. B190 69910.1016/S0168-583X(01)01238-1 ↗
23. Tsuchiya B, Nagata S, Ohtsu N, Toh K and Shikama T 2005 Japan Institute Metals 46 196
24. Yang D H and Hur B Y 2006 Mater. Lett. 60 363510.1016/j.matlet.2006.03.074 ↗
25. Yang D H, Hur B Y, He D P and Yang S R 2007 Mater. Sci. Eng. A445 41510.1016/j.msea.2006.09.064 ↗
26. Zeppelin F V, Hirscher M, Stanzick H and Banhart J 2003 Compos. Sci. Tech. 63 229310.1016/S0266-3538(03)00262-8 ↗