journal article·2013-10

Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) route

PALLAV GUPTA, DEVENDRA KUMAR, OM PARKASH, A K JHA

Bulletin of Materials Science· Volume 36· Issue 5
Publisher page

Abstract

The aim of this paper is to investigate the effect of sintering temperature and time on the properties of Fe–Al2O3 composite (5 wt% Al2O3; 95 wt% Fe) prepared by powder metallurgy process. X-ray diffraction, microstructure, density, hardness and compressive strength of prepared samples have been investigated. XRD studies show the presence of Fe and Al2O3 along with iron aluminate phase. Iron aluminate is formed as a result of reactive sintering between iron and alumina particles. Microstructural examination of the specimen showed a dense structure with nanosize dispersion of the reinforcement of ceramic phase. Density as well as hardness of specimens depend on the formation of iron aluminate phase, which in turn depends on sintering temperature and time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Aldas K and Mat D M 2005 J. Mater. Proc. Technol. 160 28910.1016/j.jmatprotec.2004.06.021 ↗
2. Chen S H and Wang T C 2002 Acta Mechan. 157 11310.1007/BF01182158 ↗
3. Chua B W, Lu L and Lai M O 1999 Compos. Struct. 47 59510.1016/S0263-8223(00)00031-3 ↗
4. Fedorchenko I M and Ivanova I I 1969 Porosh. Metall. 84 23
5. Fligier A Wlodarczyk, Dobrzanski L A, Kremzer M and Adamiak M 2008 J. Achiev. Mater. Manuf. Engg. 27 99
6. Karak S K, Chudobab T, Witczak Z, Lojkowski W and Manna I 2011 Mater. Sci. Engg. A528 747510.1016/j.msea.2011.06.039 ↗
7. Karak S K, Majumdar J Dutta, Lojkowski W, Michalski A, Ciupinski L, Kurzydłowski K J and Manna I 2012 Philos. Mag. 92 51610.1080/14786435.2011.619508 ↗
8. Konopka K and Ozieblo A 2001 Mater. Char. 46 12510.1016/S1044-5803(01)00113-9 ↗
9. Miracle D B 2005 Compos. Sci. Technol. 65 252610.1016/j.compscitech.2005.05.027 ↗
10. Pagounis E, Talvitieb M and Lindroos V K 1996 Compos. Sci. Technol. 56 132910.1016/S0266-3538(96)00101-7 ↗
11. Rabiei A, Vendra L and Kishi T 2008 Compos. Part A: Appl. Sci. Manuf. 39 29410.1016/j.compositesa.2007.10.018 ↗
12. Mehdi Rahimian, Naser Ehsani, Nader Parvin and Reza Baharvandi Hamid 2009 J. Mater. Proc. Technol. 209 538710.1016/j.jmatprotec.2009.04.007 ↗
13. Reddy B S B, Rajasekhar K, Venu M, Dilip J J S, Das Siddhartha and Das Karabi 2008 J. Alloys Compd. 465 9710.1016/j.jallcom.2007.10.098 ↗
14. Rosso M 2006 J. Mater. Proc. Technol. 175 36410.1016/j.jmatprotec.2005.04.038 ↗
15. Roy D, Ghosh S, Basumallick A and Basu B 2006 Mater. Sci. Engg. A415 20210.1016/j.msea.2005.09.100 ↗
16. Shen Y L and Chawla N 2001 Mater. Sci. Engg. A297 4410.1016/S0921-5093(00)01256-9 ↗
17. Tjong S C and Ma Z Y 2000 Mater. Sci. Engg. 29 4910.1016/S0927-796X(00)00024-3 ↗
18. Torralba J M, Costa C E Da and Velasco F 2003 J. Mater. Proc. Technol. 133 20310.1016/S0924-0136(02)00234-0 ↗
19. Wei Yueguang 2001 Acta Mechan. Sinica 17 ISSN 0567-771810.1007/BF02487769 ↗