journal article·2017-01-01Open access

Application of Atmospheric Pressure Plasma Jet to Surface Functionalization of Natural Fiber

Keiko Gotoh, Tomoko Ohi, Ryoko Yasukawa

Abstract

The atmospheric pressure plasma (APP) jet was applied to the surface treatment of natural fibers, cotton, wool and silk. From the SEM observation, the wool and silk fibers were found to be slightly damaged after the APP treatment. X-ray photoelectron spectroscopic results showed that the oxygen concentration on the fiber surfaces increased by the APP treatment, especially for wool. Little change in mechanical properties of the fabrics was found, whereas the water wicking into the fabric enhanced after the APP treatment. In the case of the wool fabric, the water wicking remarkably increased and the quick drying did not significantly decrease due to the APP treatment. In the inkjet dyeing of wool fabric with acid dye, the color deepening at the initial stage of dyeing process considerably increased by the APP pre-treatment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Nanomaterials and Printing Technologies · Plasma Applications and Diagnostics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Human Life and Environment, Nara Women's University

References (41)

Show source-provided references
1. [1] S. Luo and W. J. Van Ooij, J. Adhesion Sci. Technol.,16, 1715–1735 (2012).10.1163/156856102320396102 ↗
2. [2] Website of Ministry of Economy, Trade and Industry, Japan (March 30, 2012; News Releases); http : / / www. meti. go. jp / press / 2011 / 03 /20120330004/20120330004.html, 20120330004–1. pdf –20120330004–6.pdf (in Japanese).
3. [3] Website of Environmental Restoration and Conservation Agency, Japan; https://www.erca.go.jp/yobou/taiki/rekishi/06.html (in Japanese).
4. [4] H. Drnovská, L. Lapčik Jr, V. Buršikavá, J. Zemek and A. M. Barros-Timmons, Colloid Polym. Sci.,281, 1025–1033 (2003).10.1007/s00396-003-0871-8 ↗
5. [5] M. Lehocký, H. Drnovská, B. Lapčiková, A. M. Barros-Timmons, T. Trindade, M.ZembalaandL. Lapcik Jr, Colloids Surfaces A: Physicochemical & Engineering Aspects., 222, 125–131 (2003).10.1016/S0927-7757(03)00242-5 ↗
6. [6] J. Chai, F. Lu, B. Li and D. Y. Kwok, Langmuir, 20,10919–10927 (2004).10.1021/la048947s ↗
7. [7] M. C. Almazán-Almazán, J. I. Paredes, M. PérezMendoza, M. Domingo-García, F. J. López-Garzón, A. Martínez-Alonso and J. M. D. Tascón, J. Colloid Interface Sci. 287, 57–66 (2005).10.1016/j.jcis.2005.01.072 ↗
8. [8] M. C. Almazán-Almazán, J. I. Paredes, M. PérezMendoza, M. Domingo-García, F. J. López-Garzón, A. Martínez-Alonso and J. M. D. Tascón, J. Colloid Interface Sci., 293, 353–363 (2006).10.1016/j.jcis.2005.06.073 ↗
9. [9] E. Vassallo, A. Cremona, F. Ghezzi and D. Ricci, Vacuum, 84, 902–906 (2010).10.1016/j.vacuum.2009.12.008 ↗
10. [10] S. Förster, C. Mohr and W. Viöl, Surface & Coatings Technology, 200, 827–830 (2005).10.1016/j.surfcoat.2005.02.217 ↗
11. [11] U. Lommatzsch, D. Pasedag, A. Baalmann, G. Ellinghorst and H. E. Wagner, Polym., 4, S1041–S 1045 (2007).10.1002/ppap.200732402 ↗
12. [12] X. Lu, Q. Xiong, Z. Xiong, J. Hu, F. Zhou, W. Gong, Y. Xian, C. Zou, Z. Tang, Z. Jiang, and Y. Pan, J. Appl. Phys., 105, 043304 (2009).10.1063/1.3079503 ↗
13. [13] N. Jiang, A. Ji and Z. Cao, J. Appl. Phys., 106,013308–1–013308–7 (2009).10.1063/1.3159884 ↗
14. [14] J. Laimer, H. Reicher and H. Störi, Vacuum, 84, 104 –107 (2010).10.1016/j.vacuum.2009.04.013 ↗
15. [15] K. Gotoh, A. Yasukawa and Y. Kobayashi, Sen'i Gakkaishi, 68, 19–26 (2012).10.2115/fiber.68.19 ↗
16. [16] K. Gotoh, A. Katsuura, A. Honma and Y. Kobayashi, Sen'i Gakkaishi, 69, 169–176 (2013).10.2115/fiber.69.169 ↗
17. [17] K. Gotoh and S. Yoshitaka, Textile Research J., 83 (3), 1606–1614 (2013).10.1177/0040517513478454 ↗
18. [18] L.Tian,H.Nie,N.P.Chatterton,C.J.BranfordWhite, Y. Qiu and L. Zhu, Applied Surface Science, 257, 7113–7118 (2011).10.1016/j.apsusc.2011.03.064 ↗
19. [19] X. Li and Y. Qiu, Applied Surface Science, 258, 7787– 7793 (2012).10.1016/j.apsusc.2012.04.152 ↗
20. [20] Z.Zhou,X.Liu,B.Hu,J.Wang,D.XinandZ. Wang, Surface & Coatings Technology, 205, 4205– 4210 (2011).10.1016/j.surfcoat.2011.03.022 ↗
21. [21] C. Wang and Y. Qiu, Applied Polymer Science, 123,1000–1006 (2012).10.1002/app.34552 ↗
22. [22] C. X. Wang and Y. P. Qiu, Surface & Coatings Technology, 14, 6273–6277 (2007).10.1016/j.surfcoat.2006.11.028 ↗
23. [23] I. Wataoka, Sen'i Gakkaishi; Sen'i To Kogyo, Vol. 68, pp.176–179 (2012) (in Japanese).10.2115/fiber.68.P-176 ↗
24. [24] R. Yasukawa, H. Yasunaga and H. Urakawa, Sen'i Gakkaishi, 62, 263–266 (2006).10.2115/fiber.62.263 ↗
25. [25] R. Yasukawa, H. Higashitani, H. Yasunaga and H. Urakawa, Sen'i Gakkaishi, 64, 113–117 (2008).10.2115/fiber.64.113 ↗
26. [26] R. Yasukawa, S. Yoshimoto, Y. Yoshimura, T. Nobue, H. Nishitani, F. Mori and H. Urakawa, Sen'i Gakkaishi, 71, 257–263 (2015).10.2115/fiber.71.257 ↗
27. [27] C.W.M.Yuen,C.W.Kan,S.Q.Jiang,S.K.A.Ku, P.S. R. Choi and K. Y. Wong, Fibers and Polymers,11(2), 229–233 (2010).10.1007/s12221-010-0229-z ↗
28. [28] C. W. Kan,C. W. M. Yuen, W. Y. Tsoi and C.K. Chan, ASEAN Journal of Chemical Engineering, 11(1),1–7 (2011).10.22146/ajche.50037 ↗
29. [29] K. Fang, S. Wang, C. Wang and A. Tian, Journal of Applied Polymer Science, 107, 2949–2955 (2008).10.1002/app.27498 ↗
30. [30] C. Zhang and K. Fang, Surface and Coatings Technology, 203, 2058–2063 (2009).10.1016/j.surfcoat.2009.02.006 ↗
31. [31] The color science association of Japan, “Handbook of Color Science, 2nd Edition”, University of Tokyo Press, pp. 288–290 (1998) (in Japanese).
32. [32] The color science association of Japan, “Handbook of Color Science, 1 st Edition, 6th Impression”, University of Tokyo Press, p. 142 (1989) (in Japanese).
33. [33] T. Koksal and I. Dikbas, Dental Materials Journal, 27, 139–144 (2008).10.4012/dmj.27.139 ↗
34. [34] M. Tahara and T. Takagishi, J. Text. Mech. Soc. Japan, 46, T35–T41 (1993).10.4188/transjtmsj.46.2_T35 ↗
35. [35] M. Mori, M. Matsudaira and N. Inagaki, Journal of Textile Engineering, 52, 19–27 (2006).10.4188/jte.52.19 ↗
36. [36] Z. Cai and Y. Qiu, Applied Polymer Science, 107,1142–1146 (2008).10.1002/app.26647 ↗
37. [37] A. P. Negri, H. J. Cornell and D. E. Rivett, Textile Research J., 63 (2), 109–115 (1993).10.1177/004051759306300207 ↗
38. [38] A. P. Negri, H. J. Cornell and D. E. Rivett, Journal of the Society of Dyers and Colourists, 109, 296–301 (1993).10.1111/j.1478-4408.1993.tb01579.x ↗
39. [39] M. Lee and T. Wakida, Sen'i Gakkaishi, 48, 699–703 (1992).10.2115/fiber.48.12_699 ↗
40. [40] C. W. Kan, K. Chan, C. W. M. Yuen and M. H. Miao, Journal of Society of Dyers and Colourists, 114, 61–65 (1998).10.1111/j.1478-4408.1998.tb01948.x ↗
41. [41] H. Shin, S. Tokino and M. Ueda, Sen'i Gakkaishi, 55,155–158 (1999).10.2115/fiber.55.3_155 ↗