Soil Guard and Soil Release Finishes of Fabrics Using Atmospheric Pressure Plasma Jet
Source abstract
Abstract
Two atmospheric pressure plasma jet (APPJ) treatments, APPJ-coating with hexamethyldisiloxane (HMDSO) and APPJ-oxidation, were investigated as soil guard and soil release finishes of textiles. The plainwoven cotton and polyester fabrics were treated by both APPJ treatments and common chemical resins. SEM observation showed that granular particles precipitated on the fiber surfaces after the APPJ-coating. From X ray photoelectron spectroscopy, silicon atoms were detected at the intensity of about half of oxygen after the APPJ-coating, which suggested the silicon oxide, mainly SiO2, film deposition onto the fiber surfaces would occur. After the APPJ-oxidation, oxygen concentration on the treated polyester fiber surface increased by several % in the spectrum, suggesting the production of polar functional groups on the surfaces. As a result,the sessile drop contact angle on the fabric drastically changed : the APPJ-coating increased the water and oil repellency of both fabrics, and the APPJ-oxidation remarkably reduced the water contact angle on the polyester fabric. Wettability of single fiber determined by the Wilhelmy method suggested that the fiber surface was heterogeneously treated by the APPJ due to the variation in the penetration depth of active species in the plasma jet into the fibrous assembly. Using carbon black and red clay as model particulate soils,their deposition onto the fabrics in the air was investigated. In addition, the soiled fabrics were cleaned in a nonionic surfactant solution with applying stirring action. The deposition of particulate soils and their removal were evaluated by the surface reflectance method. It was found that the APPJ-coating prevented the deposition of particulate soils and the APPJ-oxidation promoted their removal. Comparing with the wet chemical treatment, the APPJ treatment was found to be effective for the deposition and removal control from the viewpoint of the soil guard and release balance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Plasma Applications and Diagnostics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Human Life and Environment, Nara Women's University
Graduate School of Humanities and Sciences, Nara Women's University
Electronic Materials Research Division, Osaka Municipal Technical Research Institute
References (39)
Show source-provided references
1. [1] T. Okamoto, Sentaku no kagaku, 55, 2－8 (2010).
2. [2] Y. Ohmura, Sen'i Seihin Shohi Kagaku, 50, 1054－ 1059 (2009).
3. [3] M. Naitou, Sentaku no kagaku, 56, 9－15 (2011).
4. [4] K. Gotoh, Sentaku no kagaku, 58, 2－10 (2013).
5. [5] K. Joko, Journal of Living and Welfare Kyoto Women's University, 3,17－24 (2007).
6. [6] K. Gotoh, J. Text. Eng, 66, 97－101 (2013).10.4188/transjtmsj.66.97 ↗
7. [7] S. Luo and W. J. van Ooij, J. Adhesion Sci. Technol.,16, 1715－1735 (2012).10.1163/156856102320396102 ↗
8. [8] J. Wang and J. Liu, “Surface modification of textiles (Q.Wei Ed.)”, CRC press, Boca Raton, pp. 269－295 (2009).10.1533/9781845696689 ↗
9. [9] M. M. B. Hansan, A. Calvimontes, and V. Dutschk, J. Surfactants Detergents, 12, 285－294 (2009).10.1007/s11743-009-1130-x ↗
10. [10] K. Gotoh and S. Yoshitaka, Textile Research J., 83,1606－1614 (2013).10.1177/0040517513478454 ↗
11. [11] M. Wolter, S. Bornholdt, M. Häckel and H. Kersten, Journal of Achievements in Materials and Manufacturing Engineering, 37, 730－734 (2009).
12. [12] V. Raballand, J. Benedikt, S. Hoffmann, M. Zimmermann, and A. von Keudell, J. Applied Physics, 105, 083304 (2009).10.1063/1.3108541 ↗
13. [13] S. A. Starostin, P. Antony Premkumar, M. Creatore, H. de Vries, R. M. J. Paffen, and M. C. M. van de Sanden, Applied Physics Letter, 96, 061502 (2010).10.1063/1.3310024 ↗
14. [14] K. Gotoh, E. Shohbuke, Y. Kuroda and Y. Kobayashi, Polymer J., in press.
15. [15] K. Gotoh, A. Katsuura, A. Honma, and Y. Kobayashi, Sen-i Gakkaishi, 69, 169－176 (2013).10.2115/fiber.69.169 ↗
16. [16] Japanese Standards Association, “JIS handbook :Testing method of woven fabrics”, Japanese Standards Association, Tokyo, pp 1719－1812 (2007).
17. [17] K. Gotoh, A. Yasukawa, Textile Research J., 81, 368 －378 (2010).10.1177/0040517510387207 ↗
18. [18] K. Gotoh, M. Tagawa, N. Ohmae, M. Tagawa,“Polymer Surface Modification : Relevance to Adhesion”, Vol. 2 (K. L. Mittal, Ed.), VSP, Utrecht,The Netherlands, pp 445－457 (2000).
19. [19] K. Gotoh, A. Yasukawa, Y. Kobayashi, Sen'i Gakkaishi, 68, 19－26 (2012).10.2115/fiber.68.19 ↗
20. [20] M. Tagawa, A. Yasukawa, K. Gotoh, M. Tagawa, N.Ohmae and M. Umeno, J. Adhesion. Sci. Technol., 6, 763－776 (1992).10.1163/156856192X01097 ↗
21. [21] M. Tagawa, K. Gotoh, A. Yasukawa and M. Ikuta, Colloid & Polymer Sci., 268, 589－594 (1990).10.1007/BF01410301 ↗
22. [22] K. Gotoh, K. Harayama, Ultrasonics Sonochemistry, 20, 747－753 (2013).10.1016/j.ultsonch.2012.10.001 ↗
23. [23] R. Mahlberga, H. E.-M. Niemib, F. Denesc, and R. M. Rowelld, International Journal of Adhesion, 62, 283－297 (1998).10.1016/S0143-7496(98)00007-4 ↗
24. [24] E. Finota, S. Roualdesb, M. Kirchnerb, V. Rouessacb, R. Berjoanc, J. Durandb, J.-P. Goudonneta, L. Cotb, S, Applied Surface Science, 187, 326－338 (2002).10.1016/S0169-4332(01)01047-9 ↗
25. [25] Kiran H. Kale and Shitai S. Palaskar, Journal of Applied Polymer Science, 125, 3996－4006 (2012).10.1002/app.36601 ↗
26. [26] M. Šimor, A. Fiala, D. Kovácik, P. Hlídek , A. Wypkema, R. Kuipers, Surface & Coatings Technology, 201, 7802－7812 (2007).10.1016/j.surfcoat.2007.03.011 ↗
27. [27] S. Palaskar, K. H. Kale, G. S. Nadiger, A. N. Desai, Journal of Applied Polymer Science, 122, 1092－1100 (2011).10.1002/app.34237 ↗
28. [28] X. Zhu, F. Arefi-Khonsari, C. Petit-Etienne, M. Tatoulian, Plasma Process. Polym., 2, 407－413 (2005).10.1002/ppap.200400049 ↗
29. [29] F. Massines, N. Gherardi, A. Fornelli, and S. Martin, Surface & Coatings Technology, 200, 1855－1861 (2005).10.1016/j.surfcoat.2005.08.010 ↗
30. [30] K. Gotoh, Y. Kobayashi, A. Yasukawa, Y. Ishigami, Colloid & Polymer Sci., 290, 1005－1014 (2012).10.1007/s00396-012-2600-7 ↗
31. [31] C. X. Wang, Y. Ren and Y. P. Qiu, Surface & Coatings Technology, 202, 77－83 (2007).10.1016/j.surfcoat.2007.04.077 ↗
32. [32] C. X. Wang, Y. Liu, H. L. Xu, Y. Ren and T. P. Qiu, Applied Surface Science, 254, 2499－2505 (2008).10.1016/j.apsusc.2007.09.074 ↗
33. [33] C. X. Wang, M. Du, and Y. P. Qiu, Advanced materials Research, 331, 356－359 (2011).10.4028/www.scientific.net/AMR.331.356 ↗
34. [34] K. Gotoh, M. Tagawa, N. Ohmae, H. Kinoshita and M.Tagawa, Colloid & Polymer Sci., 279, 214－220 (2001).10.1007/s003960000414 ↗
35. [35] T. Kawase, T. Fujii, and M. Minagawa, Textile Res. J., 57, 185－191(1987).10.1177/004051758705700401 ↗
36. [36] H. B. Saringat, K. A. Sheikh, G. M. Khan, Pakistan Journal of Pharmaceutical Sciences, 17,29－39 (2004).
37. [37] U. D. Çakmak, G. Grestenberger and Z. Majo, EXPRESS Polymer Letters, 5, 1009－1016 (2011).10.3144/expresspolymlett.2011.98 ↗
38. [38] W. Cheng, P. F. Dunn and R. M Brach, The Journal of Adhesion, 78, 929－965 (2002).10.1080/00218460214510 ↗
39. [39] S.Eichenlaub, A, Gelb and S. Beaudoin, J. Colloid Interface Sci., 280, 289－298 (2004).10.1016/j.jcis.2004.08.017 ↗