journal article·2021-12-08Open access

Preparation and properties of paint prepared with nanofibrillated cellulose and waterborne epoxy resin

Xin Wang, Xi Wang, Yanfei Pan, Bingbing Zhao, Zhanpeng Liang

BioResources· Volume 17· Issue 1

Abstract

A new type of water-based paint was prepared with Salix nanofibrillated cellulose (NFC), epoxy resin (E-51), and emulsified curing agent as raw materials. The mechanical blending of coated films was characterized. The mechanical properties and friction and wear properties of the coated film were tested. Microstructure was studied by scanning electron and transmission electron microscopies, thermogravimetric analysis, and other methods. The results showed that when the amount of NFC was 1.0%, the overall performance of the coated film was improved. Herein, the flexibility was 1 mm, the adhesion was 0, the hardness was 4 H, the wear value was 15 mg/100 r, the impact resistance was 49 cm, and the gloss was 85 Gs. The friction and wear coefficient of the composite coated film after the addition of cellulose nanofibers was reduced to 0.171, which was 58.5% lower than that before the addition of cellulose nanofibers. The surface observation after abrasion indicated that the composite coated film mainly experienced abrasive wear.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Diamond and Carbon-based Materials Research · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Inner Mongolia Agricultural University; Inner Mongolia Key Laboratory of Fibrotic and Energy Development and Utilization of Sandy Shrub Resource

References

Reference metadata was not supplied for this record.